Used Maka Stv-71-B for sale (41,400)

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Ndodpfovwfz Nsx Aa Rea

Condition: used, used, top equipmentincluding setting gaugeMake MakaType STV-71Column machinewith caulking tools see picturesWorkpiece stop 2 piecesStop rail right / left 2150 mmWorkpiece blow-out 2xFoot switch2-hand safety circuitpneumatic workpiece clamping at the side 1 piecepneumatic workpiece clamping from above 2 piecesExtraction connection D 120 mmSpace requirement approx. 1200 mm x 800 mm x 1500 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Ndodpfxjvwf I No Aa Rsa

Condition: good (used), Electric motor, three-phase motor, fan motor -Manufacturer: ELMO, electric motor fan motor Njdperbm Tyjfx Aa Rsda -Type: QSB 71 B/4-2T -Power: 0.33 KW -Speed: 1400 rpm -Shaft: Ø 11 x 25 mm -Protection class: IP20 -Dimensions: 190/165/H125 mm -Weight: 6.6 kg

Condition: used, Gear motor, electric motor -Speed: 74 rpm Ndodpfx Ascwl Ayea Rja -Power: 0.37 kW -Construction: B4 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 360/160/H250 mm -Weight: 11.6 kg

Condition: used, Electric motor, three-phase motor -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 7,8 kg Nodpfx Aegyb Ersa Reda

Condition: used, Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm Ndedpfx Aegyb Enja Roa -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 8 kg

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 71 401 350 B, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Nedjx Ervuopfx Aa Rjda

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board Nsdpfok Abwlsx Aa Rsda 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Ndodpfx Ajzcyq Hsa Rja

Condition: good (used), Year of construction: 1992, Well-maintained elongated hole drilling machine with the following features: Nodpfx Aaezdcdls Roda Table can be tilted With center stop With length stop With turret drilling template for series drilling with spacing of 16, 22, 25, 32 mm.

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Ndedpfxszn N Auj Aa Roa Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: excellent (used), For sale is an SEW-EURODRIVE SPIROPLAN WA20DT71D4 geared motor with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear from use. The power cable, as shown in the pictures, is included. Nedpfsznlb Hex Aa Reda Thanks to its compact design, the geared motor is ideally suited for driving conveyors, production machines, packaging machines, feeders, and many other industrial devices. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: WA20 Motor type: DT71D4 Complete type: WA20DT71D4 Power: 0.37 kW Supply: 230/400 V Δ/Y Frequency: 50 Hz Motor speed: 1380 rpm Output speed: 71 rpm Gear ratio: i = 19.44 Torque: 36 Nm Rated current: 2.15/1.24 A Protection class: IP54 Insulation class: B Operating mode: S1 Design: Universal Weight: 8.685 kg Country of origin: Germany

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Nsdpfxsznk U Ee Aa Rsda Gear ratio: i = 35.00 Output speed: 40 rpm Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: used, Central processing unit, control, switchgear, CPU -Central unit CP476 product number: 7CP474.60-1 -Interface module IF371 product number: 7IF371.70-1 -Analog output module AO352 product number: 7AO352.70 Njdodnin Tjpfx Aa Roda -Dimensions: 153/155/H62 mm -Weight: 0.7kg

Condition: used, Gear motor, electric motor, three-phase motor Njdpfx Aecwuvtja Roda -Speed: 30 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 385/160/H255 mm -Weight: 12 kg

Condition: used, Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg Njdpfx Ajdwhuqea Roda

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Nsdpfx Aaev S Diuj Roda Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Nodpfx Aov Hm Nmsa Rsda Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 82,340 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details. Nedpfx Aajzd Dfvj Rsda - 2 units available- Control Unit: Siemens Sinumerik 840D- Number of Axes: 5-Axis (X, Y, Z linear axes and A, C rotary/swivel axes)- Pneumatic Operating Pressure: 6 bar- Control Voltage: 24 V- Nominal Power: 55 kW- Nominal Current: 145 A- Foundation Requirement: Reinforced concrete floor, quality EN 206, load capacity 2500 kg/m²- Workplace Lighting: Hall lighting of 250-500 Lux required- Ambient Operating Temperature: 10-35° Celsius- Operating Voltage: 400 V / 50 Hz AC- Pneumatic Connection Thread: ½"- Pneumatic Supply Line: Clearance width min. 1"- Compressed Air Quality: Drained and cleaned- Compressed Air Consumption: approx. 800 NI/h uncompressed- Noise Protection: Machine completely enclosed in a soundproof booth, interior illuminated. Sound insulation max. 20 dB(A) in medium to high frequency range with booth closed.- Safety Measures: Fully enclosed soundproof cabin, safety bumpers on the front edges of the tables, safety contact strips on the closing edges of the automatic sliding doors, limit switch protection on all sliding and hinged doors, movable partition between the tables.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Ndsdpfx Aaegiwl De Rsa Combined oscillating mortiser and drilling machine. Available immediately

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed - compatible with all B&R 2005 controls - fully functionalManufacturer: B&R Nodpfxeyxg Tuj Aa Rsda type: CP152 spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9

Condition: new, I offer a new, unused industrial drive from the renowned German company STOBER. The motor is equipped with a 24 V DC electromagnetic brake and an SSI Multiturn ROQ 425 absolute encoder, making it ideally suited for precise positioning systems, industrial automation, conveyors, and production machines. Technical specifications: * Manufacturer: STOBER * Type: B21R 71 G 4 * Power: 0.37 kW * Voltage: 220–240 / 380–420 V (50 Hz) * Voltage: 220–277 / 380–480 V (60 Hz) * Rotational speed: 1370 / 1700 rpm Ndedsza Hzaspfx Aa Roa * Electromagnetic brake: 4 Nm, 24 V DC * Encoder: Multiturn ROQ 425 SSI, 10–30 V * Protection class: IP56 * Insulation class: F * Mounting design: IMB5 * Operating mode: S3 ED 25% Condition: * Factory new. * Never used. * Very good visual condition. * Stored in a warehouse. * Sold exactly as shown in the pictures. The STOBER drive is a high-quality industrial solution that provides reliability, precise positioning, and long service life. Thanks to the use of an SSI encoder and an electromagnetic brake, it is ideal for advanced automation applications.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Ndjdpfx Ajy S Hahja Roa Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: excellent (used), B&R 4PP220.0571-65 HMI/PLC for sale. It was used for tests only. Never made it's way to the machine. Sitting in a storage sor couple of years. Nedpfxoy N Nmxs Aa Rjda

Condition: reconditioned (used), Year of construction: 1998, machine/vehicle number: M000039046, drilling depth: 180 mm, height adjustment type: mechanical, table width: 315 mm, table length: 565 mm, drill chuck size: 20 mm, overall weight: 260 kg, rotational speed (max.): 2,840 rpm, power: 1.5 kW (2.04 HP), working height: 850 mm, MAKA Slot Mortising Machine LB-1 Nodpfx Aajyc Rz Ao Reda Sturdy, heavy cast iron work tables and supports, combined with a large machine base, ensure flawless and smooth operation. Height and depth adjustments are monitored via graduated scales, while the ultra-smooth single-lever adjustment on ball guides allows for fatigue-free working. Technical data: Table size: 565 x 315 mm Work table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Vertical adjustment of drill head: 140/160 mm Two-jaw drill chuck: 0-20 mm Spindle speed: 2,850 rpm Motor power: 1.5 kW Extraction nozzle diameter: 90 mm Net weight: 60 kg Sound level according to DIN 45635/1600: 66.9 dB The machine is in excellent technical and visual condition and has been inspected in our workshop. It features a dowel hole drilling device for 16-22-25-32 mm and a precision mitre stop 45°- 0 -45°. Shipping available at additional cost. We only ship within the EU. No shipping outside the EU.