Used Manzini F60 for sale (125)

Condition: used, functionality: fully functional, COMPRESSED AIR PRESSURE: 8 BAR COMPRESSED AIR CONSUMPTION: 100 NL/MIN STEAM SATURATED DRY PRESSURE: 4 BAR STEAM CONSUMPTION: 40 KG/H WATER CONSUMPTION: 0.9 L/H. PRODUCTION 1000 KG BAGS: 15 BAGS/HOUR. PRODUCTION 200 KG BAGS: 60 BAGS/HOUR. PRODUCTION 5-20 KG BAGS: 160 BAGS/HOUR PROTECTION DEGREE CONTROL PANEL: IP55 VOLTAGE: 220/380V READY TO FILL 250L AND 1,000L DRUMS. - Production will depend on the format and product to be filled. Packaging: Pre-sterilized flexible bags in pre-palletized drums - Up to 160 bags / hour 5 lt - 20 lt; - Up to 60 bags per hour 200 lt; - Up to 15 bags per hour 1000 lt Iedswnnzropfx Abhsif Machine complete with roller conveyor for pallet infeed. Excellent condition. Dimensions of TRANSFER OF FILLED FULL PALLETS OUTPUT LENGTH: 5M WIDTH: 1.75M USEFUL WIDTH: 1.20M HEIGHT: 1.95

Condition: like new (used), The product conveyed by the notch thermophysics is introduced into the thermophysics body through the inlet star valve. Inside the thermophysics body, the product undergoes surface heating and is mixed and conveyed to the outlet via the screw conveyor. At the end of the thermophysics body, another star valve transfers the product into a vacuum body. During transport inside the vacuum body, the vacuum causes the separation of the tomato skins. The product exits the body under vacuum through a star valve, which helps maintain the vacuum condition inside the body. The treated product falls onto the conveyor, which removes the peeled skins, as well as the water (formed by steam condensation) and the juice (lost during the treatment); the skins are also separated in the area before the sorting belt. Once the tomatoes have been drained and peeled, they are introduced onto the sorting conveyor belt from which they are evenly distributed to the skin separators. Finally, the product is completely peeled on the skin separators. Iodpfx Asznaf Hjbheif Dimensions of the stainless steel chain hoist with blades: Useful width: 47 cm Separation between blades: 23 cm Blade height: 16.5 cm

Condition: like new (used), COMPRESSED AIR PRESSURE: 8 BAR COMPRESSED AIR CONSUMPTION: 100 NL/MIN STEAM SATURATED DRY PRESSURE: 4 BAR STEAM CONSUMPTION: 40 KG/H WATER CONSUMPTION: 0.9 L/H. PRODUCTION OF 200 KG BAGS: 60 BAGS/HOUR. PRODUCTION OF 5-20 KG BAGS: 160 BAGS/HOUR CONTROL PANEL PROTECTION DEGREE: IP55 Iiedpfeyni Hzex Abhof VOLTAGE: 220/380 V READY FOR FILLING 250L AND 1,000L DRUMS. - Production capacity depends on the format and product to be filled. Packaging: Pre-sterilized flexible bags in pre-palletized drums - Up to 160 bags/hour (5 lt – 20 lt) - Up to 60 bags/hour (200 lt) - Up to 15 bags/hour (1,000 lt) Machine complete with roller conveyor for pallet infeed. Excellent condition.

Condition: excellent (used), AUTOMATED BALL The vacuum concentration ball is used for the production of jellies, fruit and tomato concentrates, sauces and juices in general, and also for other liquid and semi-liquid food products. The concentration ball is vertically cylindrical in shape, with a double bottom for indirect steam heating and with an agitator to prevent burning of the product. In order to concentrate the product, the machine has been connected to a group suitable for vacuum with condenser and pumps. The vacuum technique allows the evaporation of the water that is present in the treated product, at low temperatures, and guarantees economic convenience in terms of time allocated to the process and a more delicate treatment of the product. The production may vary depending on the product and the brix degrees. Ijdpfjwny Nbex Abhoif

Condition: like new (used), functionality: fully functional, The Manzini TE30 Single Turbo Passer is an industrial machine designed for processing fruits and vegetables, especially in the food industry. Its main function is the separation of pulp and seeds through a centrifugal refining system, enabling the production of purees, sauces, and concentrates with a homogeneous texture and free from impurities. Features: Ijdpfx Abswxw A Tohoif - Refining System: Utilizes a high-speed rotor that propels the product through interchangeable sieves, allowing the final texture to be adjusted according to specific requirements. - Versatility: Suitable for a wide variety of products, including tomatoes, stone fruits, berries, and other vegetables, adapting to various production processes. - Efficiency: Engineered for continuous operation, ensuring high output with minimal maintenance. - Hygiene: Made entirely of stainless steel with an accessible design for easy cleaning and to meet food hygiene regulations. - Output may vary depending on the processed product.

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): Iisdpfx Aozqu Dcobhef 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: used, Halvor Forberg paddle mixer stainless steel Type: F60 Iodpfx Abexc I Ewohsif Capacity: 60 liters Equipped with 2 lump breakers Equipped with discharge hopper See our other advertisements VMA Wekerom

Condition: used, Water or liquid filling line for PET containers – capacity approx. 6000 bph (2.0 L) Currently, the machines are configured for 2.0 L PET bottle formats (other formats not included). It is possible to adjust to smaller or larger PET bottles by preparing the appropriate equipment. The line includes: - Nagema BF-60 filler with 12-head bottle capping unit - Plate conveyors for PET bottles - Nagema saturator, type KOMI 160 - Spomasz wrap-around paper labeller - Bottle packer with control cabinet for creating multipacks, e.g. 2x3 - Electric shrink oven + cooling fan for multipacks - Pallet wrapper Iiodowny Hgepfx Abhsf The last photo shows the layout and dimensions of the machines. Technical condition: the machines were operational up to the end of production in 2018. Inspection and maintenance are recommended before resuming production. Optionally, a SIDEL SBO4 blower, which was last in operation on this line, can also be purchased.

Year of construction: 2002, condition: excellent (used), Used Steam Boiler Manufacturer: LOOS Type: UF Year of Manufacture: 2002 Steam Output: 600 kg/h Operating Pressure: 6 bar Burner: Weishaupt WG40N/1-A Design: ZM-LN Output: 55-550 kW Year: 2002 Connection Pressure: 15-500 mbar Ijdeizxbuspfx Abheif We speak Russian! Please arrange viewings by phone only! Preferably sold to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Condition: used, Year of construction: 2020, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm Iijdpjzux T Nofx Abhef - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2019, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, For sale: a Felder Format4 Tempora F600 edge banding machine in very good condition. The machine comes from a professional interior design workshop and has always been carefully maintained and used. The Tempora F600 is known as a very reliable industrial edge banding machine with a high processing speed (10/18 m) and excellent finishing quality. The machine is in full working order and can be put into use immediately. Specifications: Brand: Felder Model: Format4 Tempora F600 Year of construction: 2019 Features include: Smartouch touchscreen control Program settings with memory Anti-glue adhesion fluid Pre-milling unit For panels with a thickness up to 60mm Radius milling cutter, top and bottom Corner rounding unit Radius scraper unit Flat scraper unit Glue remover fluid Polishing unit Automatic feed Iijdpfx Aoy R I Rfjbhsf Suitable for processing: ABS edge banding PVC edge banding Veneer edge banding Solid edge strips Condition: The machine is in good technical and optical condition and has always been periodically maintained and cleaned in a professional workshop. Delivery: The machine can be picked up in the condition as shown in the photos. Inspection: Inspection is possible by appointment in Rijnsburg. Transport: To be arranged by the buyer. Available from mid-July. Asking price: €26,490,- excluding VAT.

Condition: good (used), Year of construction: 2020, BRONNEBERG FF600 Alligator Shear Compact, easily transportable alligator shear for effectively cutting and cleaning light metals. The Forfex-500 features a mechanically adjustable counter blade and a protected shear head. The protected shear head is operated with a mechanical foot pedal for single cuts or continuous cutting. This alligator shear is designed to provide the operator with an optimal view of the material being cut. The blades of the Forfex-500 shear can be rotated up to four times. Features: Easy to transport within your scrap yard Mouth opening and cutting speed adjustable. Simple adjustment of the desired mouth opening Equipped with an oil filter as standard Iiedezux S Sjpfx Abhef Specifications Drive: Electric 400 Volt - 7.5 kW Cutting capacity: Ø 40 mm (St 37) Blade length: 500 mm Blade opening: max. 275 mm Dimensions: 1,850 x 700 x 1,500 mm Weight: 1,135 kg

Condition: excellent (used), mileage: 349,000 km, power: 382 kW (519.37 HP), first registration: 09/2015, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,450 mm, loading space width: 2,550 mm, Year of construction: 2015, Equipment: central locking, retarder, trailer coupling, = Additional Options and Equipment = - Low noise - Intarder Isdpfxoytr Ixj Abhoif - Alloy wheels - Air suspension - Reversing camera - Sun visor - Xenon lighting - Power Take-Off (PTO) - Central lubrication - Towing hitch = Further Information = Unladen weight: 23,345 kg Payload: 13,655 kg Gross vehicle weight: 37,000 kg Body manufacturer: HMF 6020 K7 CE marking: yes Technical condition: very good Visual condition: very good Price: On request

Condition: excellent (used), mileage: 225,000 km, power: 397 kW (539.77 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Refrigerator - Air suspension - Air horn - Reversing camera - Sun visor - Auxiliary heater/parking heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication system - Towing hitch = Additional Information = Axle Configuration Suspension: Air suspension Front axle 1: Steered Iisdpfxova Dwhs Abhsf Rear axle 1: Lift axle; steered Weights Unladen weight: 22,755 kg Functional Crane: HMF 6020-O K6 + JIB FJ 1200-6, year of manufacture 2018, fitted behind the cab Superstructure brand: HMF 6020-O K6 + JIB FJ 1200-6 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: like new (used), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, total length: 4,412 mm, Equipment: documentation/manual, We are offering this like-new Format4 tempora F600 60.06L edge banding machine, manufactured in 2021. It features sharp pre-milling cutters, AdvantEdge zero-joint technology, X Motion PLUS control system, interchangeable glue tank, a 2-motor corner rounding unit, spraying system, polishing unit, etc. The 'Nesting' package also ensures that banding can be applied along pre-drilled holes and other cutouts. This is a very complete and well-maintained machine in excellent condition. Iiedszt Dkkopfx Abhof It is being sold due to a change in business activities. The machine can be inspected while in operation. Manufacturer: Format4 Model: tempora F600 60.06L Year of manufacture: 2021 Condition: like new Category ID: 877 Type ID: 664 Machine type: edge banding machine If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, mileage: 196,603 km, power: 324 kW (440.52 HP), first registration: 03/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 5,900 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel, total length: 10,400 mm, total width: 2,550 mm, loading space length: 6,530 mm, loading space width: 2,540 mm, loading space height: 1,220 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Additional options and accessories = - Remote-controlled central locking - Tow hitch - PTO - Radio - Rearview camera - Disc brakes - Sun visor - Spotlights - Toolbox = Notes = Man TGS 35.440 BB. Spring suspension front and rear. HMF6020 OK6 FJ 1200K6 Scanreco radio remote control. Ijdpfx Abjztxf Ajheif Stainless steel toolboxes around the truck. Rockinger trailer coupling 40 mm. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65R22.5; Steerable; Tire tread left: 60%; Tire tread right: 60% Front axle 2: Tire size: 385/65R22.5; Steerable; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60% Weights Unladen weight: 24,285 kg Payload: 10,715 kg GVW: 35,000 kg Functional Crane: HMF Maintenance APK (Technical Inspection): Valid until 02/2027 Financial information Price: On request Identification Model number: TGS 35.440 8x4 BB / HMF 60 tm + = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, CEDS DURADRIVE DAPE-F603-0450.04400.00 three-phase motor, serial number: 17-033307 + Stöber F603AG4340MR20 gearbox, serial number: 2271487, unused, with signs of storage, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Iodpfx Aboi D Hnfeheif

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving Iiodsw Ugpyopfx Abhsf - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: ready for operation (used), Coolant – Filter System KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper band filter -Control system – OP 3 -Coolant pumps -Electrical diagrams Iodpfxeztyfds Abhoif Dimensions: L x W x H 2.4 x 1.2 x 1.5 meters / Weight 1200 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Iisdpfxsztxnde Abhef Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: good (used), Year of construction: 2010, operating hours: 2,185 h, functionality: fully functional, For sale: a Handtmann VF-608 Plus vacuum filler. Year of manufacture: 2010. 400V, 3.0 kW. The machine is entirely made of V2A stainless steel, in good condition, fully functional, and ready for immediate use. Operating hours: 2,185 h. Dimensions: 70x80x180 cm. Upon request, it can also be supplied with a holding device, casing filler, or a LEMS portioning device; additional costs apply, please inquire. Iedozcwy Ejpfx Abheif Further information available upon request. Payment in cash or by advance payment! Sale only to commercial businesses. No guarantee, no warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Sale – 5% Off New and fully operational CNC fiber laser cutting machine designed for fast and precise sheet-metal processing. The MTP F-6000 is equipped with a 6000 W Raycus laser source, an automatic-focus cutting head and a 3000 × 1500 mm worktable. The solid, heat-treated machine frame provides high rigidity, resistance to deformation and consistent cutting accuracy over many years of operation. The machine is suitable for production plants, metalworking companies and manufacturers of steel structures. KEY SPECIFICATIONS: • laser power: 6000 W • laser source manufacturer: Raycus • technology: fiber laser • wavelength: 1064 nm • working area: 3000 × 1500 mm • control: CNC • cutting head: Auto Focus • cooling system: water-cooled • power supply: 400 V, three-phase • operation: automatic MAXIMUM CUTTING THICKNESS: • mild steel: up to approximately 25 mm • stainless steel: up to approximately 16 mm • aluminium: up to approximately 14 mm • brass: up to approximately 8 mm • copper: up to approximately 6 mm The maximum cutting thickness depends on the type and quality of the material, the assist gas used and the selected cutting parameters. KEY FEATURES: • automatic-focus cutting head • CNC control system • precision linear guides • helical rack-and-pinion drive • rigid and stable construction • automatic central lubrication system • water-cooling system • fully enclosed protective housing • fume extraction system • emergency stop • CE marking STANDARD EQUIPMENT: Ijdeyv Dx Aspfx Abhoif • Raycus 6000 W laser source • Auto Focus cutting head • CNC control system • water chiller • extraction system • 3000 × 1500 mm worktable • protective enclosure • central lubrication system • documentation and operating manual • safety light curtain OPTIONAL EQUIPMENT: • air compressor • dust extraction system • automatic exchange table ADVANTAGES: • high cutting speed and productivity • excellent edge quality and repeatability • high positioning accuracy • low operating costs • simple and convenient operation • construction designed for industrial production APPLICATIONS: • sheet-metal processing and cutting • manufacturing of steel structures • automotive industry • HVAC and ventilation industry • production of enclosures, cabinets and metal components • serial and custom production MACHINE DIMENSIONS: • length: 8450 mm • width: 2950 mm • height: 2320 mm TRANSPORT: • free transport within Poland • transport to other European countries quoted individually Year of manufacture: 2026 Condition: new, fully operational Location: Fabryczna 1, 08-300 Sokołów Podlaski, Poland

Condition: new, Year of construction: 2026, 60 Ton Transport Roller Set – Heavy-Duty Industrial Solution for Moving Massive Loads The 60-ton transport roller set is an industrial-grade tool designed for efficient and safe movement of massive objects such as production machinery, structural components, and industrial equipment. The set consists of transport platforms and steering bars, creating a system that enables precise maneuvering even under demanding operating conditions. Its construction meets the highest standards of strength and stability, making it an essential solution for industrial, logistics, and construction applications. Main advantages of the 60-ton transport set Working load capacity up to 60,000 kg – enables safe and controlled movement of extremely heavy equipment. Heavy-duty steel construction – provides resistance to high loads, impacts, and intensive industrial operation. Iedpfx Aezh E D Ujbheif 30×65 mm transport rollers – made of wear-resistant material, leaving no marks on the surface and operating in a tracked roller system. Anti-slip pads – increase friction between the load and the platform, preventing unwanted movement during transport. Compact dimensions and low loading height (140 mm) – allow easy maneuvering in confined spaces and technical corridors. Steering bar with ±90° turning angle – ensures precise guidance of the set even in areas with limited maneuvering space. Construction and technology – optimized for extreme loads The set has been designed with durability, safety, and ease of operation in mind. The main components are manufactured from thick steel profiles, providing long service life and resistance to bending and twisting under heavy loads. The transport rollers ensure low rolling resistance, while their precise mounting in the support system minimizes vibrations and guarantees smooth movement of the load. Key components: Transport platform – equipped with a Ø150 mm load-bearing surface and 30×65 mm rollers, ensuring optimal load distribution. Steering bar (880 mm) – enables directional control and precise maneuvering of the load even in areas with limited operating space. Connecting bar – 1000 mm long, allowing adjustment of the trolley spacing to match the width of the transported load. Precise maneuvering and maximum transport safety Thanks to precise manufacturing, the 60-ton transport set enables stable, smooth, and safe movement of even the most demanding loads. The anti-slip surface reduces the risk of load shifting, while the compact geometry of the set makes operation easier in confined spaces. The integrated steering system provides the operator with full control over every movement, even in conditions with limited visibility or difficult surfaces. Standard equipment 2 × transport platforms with 16 rollers (30×65 mm) 2 × steering bars, length 880 mm 2 × connecting bars, length 1000 mm Technical specifications – 60 Ton Transport Set Parameter Value Roller size 30×65 mm Load capacity 60,000 kg Loading height 140 mm Load-bearing surface per element Ø150 mm Support points 1 Steering bar length 880 mm Steering angle ±90° Dimensions (L × W) 320×155 mm Platform dimensions (L × W) 130×130 mm Connecting bar length 1000 mm Trolley spacing width 120–665 mm

Condition: excellent (used), Year of construction: 1974, center height: 250 mm, grinding length: 2,500 mm, grinding wheel diameter: 750 mm, grinding diameter: 500 mm, Max. grinding diameter: 500mm Iiedszm N D Nepfx Abhef Max. grinding length: 2500mm Grinding wheel diameter: 750mm

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Iijdpfx Ajxrg S Iebhjf Travel: X-axis: 398mm Z-axis: 1250mm Tailstock : Tailstock travel: 1150mm