Used Marel Salmon Ppi Top for sale (8,655)

Condition: used, Year of construction: 2010, functionality: unexamined, For sale: Conveyor belt Marel Salmon A/S, type PPI top Conveyor, year of manufacture: 2010. Upper belt width: 290 mm, lower belt width: 560 mm, length: 9.4 m. Distance between lower and upper belt: 20 cm. Price negotiable. Net price: 2,200 euros. Hsdpfx Aeyuvgzsb Tot

Condition: ready for operation (used), Year of construction: 2011, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It’s designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water usage make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Unique cutting principle Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Manufacturer: Marel Model: CT 2630 Year: 2011 Fish size: 2-7 kg Hedpfx Abjzu Rfkj Tet Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! Hjdoy H Ncbspfx Ab Tjt German service, spare parts warehouse, etc.

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt Hsdpfx Abozv Rnue Tot frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Rod loader, Topload 4-25 Year of manufacture: 2014 Hedjzwb Uzopfx Ab Tjt Previously mounted on an Emco E25.

Condition: reconditioned (used), MAREL + SCANVAEGT VÅGAR ID.NO. 1654 Hsdegfvbqjpfx Ab Tot 2x complete Multihead scales from Marel / Scanvaegt's associated platform, 14 bowls, conveyor belts, vibrator gutters, platform, distribution tools for packing in deep drawers, previously packed salami but suitable for many other things such as Vegetables, Cheese, Fish and more.

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. Hsdpfxozl Sydj Ab Tot This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, MAREL Automatic Killer K-15 Automatic poultry slaughter system from the renowned Marel brand – an Automatic Killer device designed for efficient and humane slaughter in poultry processing plants. The offered device is a component of a slaughter line, ensuring precise and repeatable operation while maintaining the highest standards of animal welfare and production hygiene. The system is designed for continuous operation in high-capacity plants. Key features and benefits: - High efficiency and operational reliability - Process automation – reduces manual labor - Precise operation for consistent process results - Stainless steel construction – easy to clean - Compliant with sanitary and industrial standards - Can be integrated with an existing MAREL processing line Technical condition: Used – very good – immediately ready for operation Technical data: - Manufacturer: Marel - Model: Automatic Killer K-15 Hodpfx Aboyzglcj Tst - Type: 3768196 - Capacity: up to 15,000 bph - Year of production: 2011 Installation and commissioning support available. Please contact us for detailed information and to receive a customised quotation tailored to your facility’s requirements. We offer a wide range of related equipment. MAREL / STORK / STUNNER / AUTOMATIC KILLER / K-15

Condition: excellent (used), Year of construction: 2008, Hello, Machine in very good condition. TM-SERVICE is a company specializing in the service and sale of poultry machinery. We install equipment anywhere, ensuring that the machines we sell are thoroughly inspected and ready for efficient operation. Hodpfxsn Nykws Ab Tot

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Hedpfx Aboztkqdj Tet Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Hedpfezp E T Ssx Ab Tjt Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Marel Portio 4003 Hodpfx Abjw Drpxj Tjt

Condition: used, TECHNICAL DETAILS - Bar diameter : 8-100 [mm] - Bar length : 1550 [mm] Hodpoyzi U Hsfx Ab Tet - Adjustable bar feed speed : 80 [m/min]

Condition: refurbished (used), functionality: fully functional, Manufacturer: Marel Model: RevoPortioner TRP600 Year: 2013 Condition: Refurbished Serial number: 10115385 Stock number: 3421 Risco vacuum filler Type: RS505CP 1.5 Serial number: C812038 Year of construction: 2013 Hopper: 350 liters Power: 3 x 400V, 50Hz, 8kW Dimensions: 2450 x 1350 x 2100 mm Weight: 1010 kg Includes accessories cart Marel Revoportioner Type: TRP600 Serial number: 10115385 Year of construction: 2013 Belt width: 600 mm Compressed air: 8 - 10 Bar, 150 Nm³/h Hodpfezqfwasx Ab Tet Power: 3 x 400V, 50Hz, 9kW Dimensions: 2150 x 1850 x 2050 mm Weight: 1400 kg Elpress drum washing machine Type: TRP700-4742453 Serial number: 10115725 Year of construction: 2013 Hot water: 3 Bar, 60°C, 35-100 L/min Cold water: 3 Bar, 10°C, 35-100 L/min Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16kW Dimensions: 1825 x 1150 x 1650 mm Weight: 550 kg Includes mold roller rack and drum lift

Condition: good (used), functionality: fully functional, mileage: 17,300 km, power: 88.26 kW (120.00 HP), fuel type: diesel, empty load weight: 5,430 kg, overall weight: 10,500 kg, axle configuration: 4x4, fuel: diesel, Year of construction: 1986, Equipment: all wheel drive, TOP CONDITION Hodpjxm S Absfx Ab Tst

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 2,200 mm, total width: 650 mm, total height: 2,770 mm, The Marel V-Cut 200 is a modern machine designed for the precise volumetric portioning of boneless meat. The device is engineered to cut lightly frozen products into portions with a consistent weight and uniform shape, ensuring high efficiency and an aesthetically pleasing product presentation. Hedpfozpwkpex Ab Tst Key advantages: - Precise portioning into portions with consistent weight and uniform shape. - Maximum utilization of raw materials thanks to volumetric portioning technology. - Option to prepare individual portions or shingled portions, ready for packaging. - Side Press function, which gives the products a uniform appearance and facilitates further automation of the process. - Intuitive operation and easy cleaning and hygiene maintenance. Application: The machine is used in meat processing plants for portioning: - pork loin, - leg, cutlet, and neck, - beef sirloin, - chicken breast, - turkey breast, - and other boneless meat cuts. Technical data: Width: 650 mm Length: 2200 mm Height: 2770 mm

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - 2nd knife row, log spacer, 4-sided segment base, discharge auger with geared motor, Fast hydraulic reverse with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a tried-and-tested and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components for this – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the gate timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Hodpspdqzxjfx Ab Tet No material bridging thanks to self-cutting hopper design The hopper performs several tasks at once. The material to be shredded is initially fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for shredding. Even with bulky parts, the shredder cuts itself free. If required, hopper extensions and lids with gas springs are also available. Long-lasting rotor bearings thanks to offset design Due to the extreme stress during shredding, a rotor bearing must be particularly robust. To prevent dust or foreign objects from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with geared motor - Fast hydraulic reverse with shock valve - Mesh size 15/20 mm List price: EUR 52,320, sold at a special price Location: Ex warehouse 54634 Bitburg - immediately available - The pictures show a machine without a discharge auger; it will be in stock soon.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Hjdpomrrwfjfx Ab Tot Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 080S0212, total length: 3,500 mm, total width: 800 mm, total height: 2,500 mm, overall weight: 500 kg, input voltage: 1,200 V, track width: 300 mm, type of input current: DC, power: 0.5 kW (0.68 HP), year of last overhaul: 2024, conveyor belt length: 7,000 mm, product height (min.): 1,500 mm, product height (max.): 2,500 mm, conveyor belt width: 300 mm, We are selling a used Marel 4003 S machine. The machine is in a condition appropriate for its age, but it is well-maintained and fully functional. It includes tooling for butterfly-cutting pork loins (for Cordon Bleu) and pork loin steaks. Regular maintenance has been performed by Marel. Hsdpfxjzkvcgj Ab Tjt

Condition: used, Manufacturer: Marel / Townsend Model: TVF630/4000TH Year: 2011 Condition: Used Serial Number: 10092893 Stock Number: 3311 Belt width: 630 mm Frying length: 4000 mm Heating: thermal oil, 232kW Oil capacity: +/- 1100 litres, 20 mm above belt Compressed air: 6 - 8 Bar, 0.5 Nm³/h Power: 3 x 400V, 50Hz, 10.5kW Dimensions: 6850 x 2100 x 2800 mm Weight: 4200 kg Additional Features Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level indicator, CI Hedpfx Aeyynkksb Tst

Condition: used, Year of construction: 2015, Manufacturer: Marel / Townsend Model: Peeler BL 2800 Year: 2015 Condition: Used Serial Number: 10145585 Stock Number: 3261 Consisting of: Marel Townsend sausage peeler Type: Peeler BL 2800 Serial number: 10145585 Year of construction: 2015 Capacity: 225 m/min Diameter: 13 - 41 mm Steam: 1.7 - 3.4 Bar, 78 kg/h Compressed air: 7 Bar Power: 3 x 380V, 50Hz, 3.8kW Dimensions: 900 x 600 x 1600 mm Hjdjyyncajpfx Ab Tjt Weight: 340 kg Marel Townsend blower unit Type: Blower 2800 Serial number: 10394495 Year of construction: 2017 Blower: Russo SKV-NS-420-3-826 Power: 3 x 400V, 50Hz, 3kW Dimensions: 1400 x 700 x 1200 mm Weight: 180 kg

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps Hodozltigjpfx Ab Tet - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011

Condition: excellent (used), Marel stainless steel 350 bandsaw in lovely condition. Perfect for factories cutting meat, fish blocks etc. Direct from closed UK fish company. Hjdpfxex Av R Ie Ab Tjt

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Hjdpfx Abox Dcpge Tet

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Hsdpfxelkc I Rs Ab Tst