Used Martin D70 for sale (568)

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Dedpfx Asx Th Ngjkmjwc

Condition: good (used), Table milling machine Martin T 25. Dwedey Srtmjpfx Akmsc

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, Thicknesser T45 by Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, reading via digital display with 1/10 mm accuracy and positioning control The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then, by repeatedly pressing the start button, change the planing height by 1 mm each time without having to set a new absolute height each time. Furthermore, 99 fixed values can also be stored as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed speed 6 + 12 m/min Rubberized infeed roller Rubberized outfeed roller Planed machine table guided on four lead screws and guides for optimal stability Low-noise design with soundproof hood Dust extraction connection 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Dwsdpfx Akoz Icvlsmoc Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: excellent (used), MARTIN T27 Flex underspindle milling machine Spindle adjustable up and down, and at an angle of -46 to +46 degrees, electrically Interchangeable spindle shank, 30 mm diameter Dwedpfx Aksz N Eywomjc Long worktables, 240 cm, with extension Adjustable fence with AIGNER guides 4-roller feed system, WEGOMA 6 spindle speeds: 3000, 4000, 5000, 6000, 8000, 10,000 rpm 6 kW, 2-speed motor Brake Very good condition, 400 operating hours

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Dwedpjzwpvaefx Akmjc Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: used, Year of construction: 1992, completely shut down used good condition cleaned Dsdsz Np I Ejpfx Akmswc functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Dwodezwp Uiepfx Akmec Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: used, Year of construction: 1985, functionality: fully functional, Slide carriage length: 3320 mm Motor power: 5.5 kW Dwodpfx Aez Iv Hqekmoc Cutting height: approx. 145 mm Height and swivel adjustment via foot-operated hydraulic system

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz Djdpfjz Alfuex Akmjwc • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Planing shaft: Strip cutter Number of cutters: 4 Height adjustment: Handwheel Planing thickness indicator: Scale Feed rate: infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: yes Motor power: 5.5 kW Dust extraction connection: 160 mm Dwodsz I Iutepfx Akmsc Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Fixed table 850 x 1100mm in grey cast iron - Table height 900mm - 3.3m sliding table, anodised aluminium construction, wear resistant tempered guides with self cleaning design. Replaceable table edge. Infinitely locking design - Min / max blade dia 250mm - 400mm giving 130mm max cutting height at 90 degrees 30mm bore with 2 x 8mm drive pins / 60mm ctres. - 5.5kw motor 4000 / 4800 / 6000 rpm rotation speed - Blade tilting up to 46 degrees - Power rise / fall / tilt, with rapid and slow creep movement Dodpfx Akoz N Hcmsmjwc - Riving knife mounted saw guar - Pro lock quick change system of the saw blade - Rip fence with easy sliding movement thanks to four grooved ball bearings. Micro metric adjustment and scale. Movement via handwheel - Cutting width - blade to rip fence 1350mm - Cross cut fence in anodised aluminium with continuous support, micro adjustment for both flip stop. Cutting length 95 to 2000mm, can be extended to 3220mm - Cross cut table in galvanised steel construction - Operating controls easily accessible on main frame - Dust extraction connection 100mm on overhead guard and 120mm dia in machine frame - 2 x riving knives 3.5" TFT overhead control unit at eye level with keyboard. - Electronic control of cutting height / cutting angle in program memory - Tool calculation including storage of 50 blades - Memory of 10 cut lists each with 50 cutting lines - FK for shortcut to frequently used functions - USB interface -2 axis scoring saw electrically adjustable. Scoring saw height and left / right position can be electrically adjusted while blade is running. Pneumatic lifting / lowering - Handndwheel adjustment of the rip fence and digital indication in control panel - 1 x 350mm dia main blade and solid scoring blade - 3.3m sliding table - Parallelogram crosscut table with analogue stop - LCD readout of angle setting

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology Dodpfozvdwpox Akmjwc • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Dwedpszdzbzjfx Akmoc Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Dedpfsz A Hh Uex Akmewc

Condition: used, Year of construction: 2006, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,900 mm, total width: 2,000 mm, total height: 1,700 mm, overall weight: 1,800 kg, Equipment: documentation/manual, saw blade guard, No. 04543 Dsdpfxez E Ntls Akmowc Sliding table saw Martin T 73 CLASSIC Used, year of construction 2006 Sliding table length 3700 mm Cutting width at rip fence 1100 mm Lowerable rip fence Rip fence adjustable by handwheel, with pneumatic assistance and digital display Saw blade diameter 250 - 500 mm Saw blade bore 30 mm Motor power 5.5 kW Electric saw blade tilt 0° - 46°, with digital display Electric cutting height adjustment, with digital display Speeds 2800 / 4000 / 5500 rpm, with digital display Electropneumatic locking of the saw spindle Central oil lubrication with pump Crosscut fence with 2 flip stops and digital dimension display Crosscut table with infinitely variable locking Table extension with tool tray Electric motor brake Parallelogram safety guard for the saw blade Pneumatic connection 6 bar Connection 400 V / 50 Hz Complete technical documentation available TÜV/GS tested and CE marked Transport dimensions approx. 3900 x 2000 x 1700 mm LWH Weight approx. 1800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 1999, condition: used, Adjustment of the milling stop: via handwheel Milling stop scale display: digital display Adjustment of the milling vice: handwheel Milling vice scale display: digital display Swiveling mechanism: yes Djdpfxjz I Iu To Akmswc

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. Dwjdpozbm Tfjfx Akmsc The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. If you are interested, please include your contact information in your inquiry. Djdpfjzzdulsx Akmewc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. Dwodpozvfm Eefx Akmjc • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Martin t60 panel saw carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, Dwsdpezzdi Nefx Akmjc main motor: 5.5 kW, 3 cutting speeds, max. blade diameter: 400 mm.

Condition: used, Year of construction: 1983, Working width: 510 mm Planing cutterhead: Spiral cutter Djdpfezq Dcbex Akmowc Number of cutters: 2 Feed table length: 2800 mm Feed table adjustment: hydraulic / foot pedal Adjustment for rabbet and chamfer joints: yes Chip removal display: scale Rabbet and chamfer joint display: scale Adjustable angle of the fence: yes Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Condition: used, functionality: fully functional, Martin Surfacing Jointer 250 x 51 cm, 4.8 kW Motor 2 cutterhead shafts, wedge-shaped guide rails Re-sharpenable jointer knives Adjustable surfacing fence, swivels 90 - 45 degrees With Aigner miter gauge Chip removal 0 - 15 mm Dust extraction port 160 mm Motor brake with switch optional Weight 900 kg Dwedpfx Ajztz Hpskmec

Condition: used, Martin t60 panel saw carriage length: 510 cm, tilting angle: 0-45 degrees, with motorized blade height adjustment, rip fence on the right side, manually adjustable up to 1200 mm with an electronic display, 2-axis scoring saw, electrically adjustable, scoring saw extending and retracting pneumatically, Dwedozlnmgepfx Akmec main motor: 5.5 kW, 3 cutting speeds, maximum blade diameter: 400 mm.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Clamping surface of rotary table: 1,200 × 610 mm Diameter of rotary table: 500 mm MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h Dwodpfoz Hwutsx Akmec EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: Alpha 2-4 LD-2, battery voltage: 230 V, Used Martin Christ Alpha 2-4 LD-2 plus freeze dryer with Vacuubrand chemistry pump Type: Alpha 2-4 LD-2 plus (101542) | Vacuubrand RC 6 Dodpfx Akjwm Eaiomswc Manufacturers: Thermo Fisher Scientific (Martin Christ) | Vacuubrand GMBH Voltage: 230 (50hz) Including documentation and manual