Used Martz Hochlader 250/2 C 2T for sale (102,495)

Condition: new, functionality: fully functional, empty load weight: 364 kg, maximum load weight: 1,636 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Flatbed Trailer 250/2 C 2T NEW VEHICLE Internal dimensions: 254cm x 151cm Side board height: 40cm Loading platform height: 71cm Total weight: 2000Kg Payload: 1636Kg Braked tandem-axle flatbed trailer Overrun brake and parking brake by KNOTT 2x 1000Kg axle and brake with reverse automatic Bolted and hot-dip galvanized steel frame Galvanized steel sheet side boards with safety latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Support wheel 6x lashing eye 13" tire M+S tire Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x U-shaped chock OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE, FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Integrated ramp, aluminum or steel -Folding crank rear supports -Anti-theft device -Net with fine or coarse mesh -H-frame -Replace steel side boards with aluminum side boards -Leaf screen in various heights, also closed -Extension side boards, aluminum or steel -Flat cover with or without rail -High cover 140cm -Automatic support wheel Further accessories available on request! Plus freight to Gera and vehicle registration document 150 € net Pictures are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. Dedpfsww A Dtex Akmowc Wide range of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers.

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, loading space length: 2,530 mm, loading space width: 1,640 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253cm x 152cm Sidewall height: 30cm Dwedpfx Akow A I Etjmsc Platform height: 80cm Gross weight: 2000kg Payload: 1532kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350kg brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminium profile side panels with tension latches Fold-down and removable on all sides Galvanized steel floor Support wheel 6 lashing eyes Reinforced 13" C-rated tyres with steel valve M+S tyres Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lamps with reversing, fog lights and triangular reflectors Top frame mounted on rubber bushings Hand pump with stowable handle Safety lock for top frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank rear supports - Full LED lighting - Anti-theft device - Mesh netting (fine or coarse) - H-frame - Leaf mesh sides in various heights, also closed - Extension side panels in steel or aluminium 30cm with tension latch - Flat cover, with or without hoops - High cover, 140cm Additional accessories available on request! Plus shipping to Gera and vehicle registration certificate: €200 net Pictures are for illustrative purposes and may show accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles in stock and available for immediate pickup at all times. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from different manufacturers. Visit us online or come by in person!

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Dwsdpsu R D Sdofx Akmsc

Condition: new, empty load weight: 360 kg, maximum load weight: 1,640 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, suspension: steel, tire size: 165R13C 96/94N, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Dwsdpfou R D Skex Akmoc

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Dwjdpfxeu Dxb To Akmjc Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. Dodjzmamujpfx Akmowc The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: new, functionality: fully functional, empty load weight: 226 kg, maximum load weight: 524 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, Year of construction: 2026, MARTZ High-Sided Trailer 250, 0.75T NEW VEHICLE Internal dimensions: 254cm x 151cm Total weight: 750 kg Payload: 524 kg Unbraked, single-axle high-sided trailer Bolted and galvanized steel frame Galvanized steel side panels, 40cm 15mm thick, robust and non-slip screen-printed plywood floor Dodpfx Aozlyxbskmewc 13-pin electrical system Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Replacement of steel side panel with aluminum side panel - Extension side panels, steel or aluminum - Integrated loading ramps, steel or aluminum - Mesh structure - H-frame - Motorcycle support rail - Flat tarpaulin with or without bows - High tarpaulin - Mesh, coarse or fine - Spare wheel with holder Further accessories available upon request! Images are for illustrative purposes and may show optional accessories that incur an additional charge. Plus vehicle registration document and freight to Gera, €125 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Wide selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: used, Year of construction: 2009, operating hours: 5,207 h, functionality: fully functional, machine/vehicle number: MPC 250, saw blade diameter: 500 mm, cutting depth: 50 mm, cutting width (max.): 250 mm, power: 9 kW (12.24 HP), total height: 1,500 mm, total length: 21,000 mm, total width: 2,000 mm, type of input current: three-phase, overall weight: 3,150 kg, MODEL MPCNC 250 FAST Instal power [kW] 11,6kW (25A) Dwsdpfxsz Iltto Akmoc Saw blade motor [kW] 5,5 Rools motor [kW] 3,5 Saw blade Dia [mm] 500 x 3,5 x 40, Z 92 Infeed rolls[piece] 6 Pressing rolls [piece] 6 Saw blade speed [m/s] 89,9 Saw blade revolution [min-1] 89,9 Cutting area s = 50 - 250 mm s = 100 - 180 mm Outlet dia 2 x fi 120 mm Air (at 30m/s) 2400 m3/h Air consumpt (6.10bar or. 5 Pa) 270 NL/min Min cut (sec) 0,3 (0,12) Max feeding speed 240 m/min Max acceleration 32 m/s2 INPUT MATERIAL edged pieces Input length od 900 do 5000 mm Thickness - adjustableo od 15 do 90 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Dedpfx Aez Nv H Uokmewc Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, Dwodpezghngefx Akmsc spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: new, functionality: fully functional, empty load weight: 374 kg, maximum load weight: 926 kg, overall weight: 1,300 kg, loading space length: 2,530 mm, loading space width: 1,520 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250 C S 1.3T NEW VEHICLE Internal dimensions: 253cm x 152cm Side board height: 30cm Loading area height: 80cm Total weight: 1300kg Payload: 926kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT Axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides Galvanized steel floor Support wheel 6 tie-down points Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector Outline lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber Hand pump with stowable handle Lock for upper frame OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank for rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf guard in various heights, also closed - Extension side boards, steel or aluminum, 30cm with tensioning latch - Flat cover with or without bows - High cover 140cm Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories at an extra cost. Dodpfx Aszlyptjkmswc Have you not yet found the right trailer? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers. In addition, we have a large assortment of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: new, functionality: fully functional, empty load weight: 289 kg, maximum load weight: 1,011 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, Year of construction: 2026, MARTZ High-Sider 250, 1.3T NEW VEHICLE Internal dimensions: 254cm x 151cm Total weight: 1300 kg Payload: 1011 kg Braked single-axle high-sider 1300 kg KNOTT axle with inertia brake, reverse assist, and parking brake Bolted and galvanized steel frame Galvanized steel side panels, 40cm high 15mm thick, robust, and non-slip screen-printed plywood floor 13-pole electrical system Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors 2x wedge-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Replacement of steel side panels with aluminum side panels - Extension side panels, steel or aluminum - Integrated loading ramps, steel or aluminum - Grid structure - H-frame - Motorcycle support rail - Flat cover with or without bow - High cover - Coarse or fine mesh net - Spare wheel with holder Further accessories available upon request! Images are for illustrative purposes and may show accessories that incur an additional charge. Plus vehicle registration document and delivery to Gera, €150 net. Haven't found the right trailer yet? We have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. Djdjww A Hbspfx Akmewc In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: as good as new (ex-display), Year of construction: 2018,

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Dwedpfx Aexqcrzekmoc Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g Hydraulic cores : 0 \+ robot TECHNOMATIC

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Dwodpfx Ajz Ipnbokmoc Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2005, operating hours: 72,887 h, functionality: fully functional, machine/vehicle number: 32-47220, Equipment: chip conveyor, The Heller MCH 250 is a robust, horizontal 4-axis machining center manufactured by the German machine tool manufacturer Gebr. Heller Maschinenfabrik GmbH. This CNC machine is specifically designed for highly productive single-piece and series production and is frequently used for machining aluminum and steel castings. Equipment: -Horizontal spindle, 2-position pallet changer with rotary table no. 1116, chip conveyor, coolant/lubricant treatment system (manufacturer Knoll, year 2007), cooling unit, tool change system, 2nd control panel -without SL. Control system: -Siemens 840D Accessories: Dwodpfx Akez N Eyksmjc -Telescopic drawer cabinet, storage shelf, clamping device, step stool (3 steps)

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Dwodpfoz Iq Iijx Akmoc Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Dwedpfx Ajz Iqyfokmoc Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Dwjdoy St Skjpfx Akmec Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Dedoz Nplkepfx Akmowc Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Condition: used, Year of construction: 2013, HELLER 7 Machines: H 6000 MCH 280 MCH 250 We offer, directly on behalf of the owner, the following machines due to a site relocation: 7 x HELLER 4-axis horizontal machining centers Manufacturer: Heller 1. Type: H 6000 Year of manufacture: 2011 Operating hours: 28,338 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 150 2. Type: H 6000 Year of manufacture: 2009 Operating hours: 33,963 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 165 3. Type: H 6000 Year of manufacture: 2013 Operating hours: 26,025 Control: Simumerik 840 D solution line Dwodpfx Ajz Ihpwjkmec Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Defect in spindle / B-axis 4. Type: MCH 280 Year of manufacture: 2011 Operating hours: 44,454 Control: Simumerik 840 D Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Tool positions: 100 5. Type: MCH250 Year of manufacture: 2008 Operating hours: 49,905 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 6. Type: MCH250 Year of manufacture: 2008 Operating hours: 43,820 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 5-position Tool positions: 100 7. Type: MCH250 Year of manufacture: 2007 Operating hours: 58,084 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 The sale is without clamping devices and tool holders. Further details and technical information are available upon request.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-20, empty load weight: 562 kg, maximum load weight: 2,138 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,885 mm, loading space width: 1,380 mm, loading space height: 1,800 mm, trailer brake: trailer braked, Year of construction: 2026, Martz Cooler 3015/2 C 2.7T refrigerated trailer, beverage trailer NEW VEHICLE Internal dimensions: 288cm x 138cm Internal height: 180cm Total weight: 2700kg Payload: 2138kg Braked tandem low-loader Overrun brake and parking brake by KNOTT 2 axles with 1350kg brake and reverse automatic Low chassis Fully welded, hot-dip galvanized steel frame 60mm side walls and roof with XPS core Insulated floor with 60mm XPS core Refrigeration unit with control display Dsdpfszu Suyox Akmewc Temperature adjustable from +2 degrees to +10 degrees 230V connection Exterior color: White Optimal base for wrapping or lettering Rear double doors with locking mechanism Bow jockey wheel Recessed lashing points in the floor Interior light 13" tires M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x U-shaped chocks 2x maneuvering handles 2x support legs at the rear OPTIONAL ACCESSORIES -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Extension cable -Complete LED lighting -Theft protection Further accessories available upon request! Plus freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock, ready for immediate delivery. The workshop is open from 8:00 AM to 5:00 PM on weekdays for all kinds of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dsdpfx Asxqhuuekmswc Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm Dwedpjz Iq Agjfx Akmoc injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Dedpfx Aksy U Nqnemowc