Used Mas/ Mair Pipe + Section Plant / Tube Welding Line for sale (23,913)

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting Iiodpfeuc Shuox Apcoa ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list Ijdpjuc Sw Ajfx Apcjia speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling Ijdoyl Upvopfx Apcsia · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Iisdpeymaypefx Apcja Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Iiodpsymax Ejfx Apcsa Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: Iisdpfxeymaw Us Apcsa 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 2025, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2025 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Iijdpeymav Rjfx Apcja Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. Iisdpfx Aoq N U Duopcea - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Ijdpfjq H Shcox Apceia Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Description WE OFFER ORBITAL WELDING GUN TO WELD SHEET TO TUBE CAN BE USED FOR DIFFERENT APLICATIONS, TUBE TO SHEET. TUBE TO TUBE Iiodpfovlarrjx Apcea Specifications Manufacturer POLYSOUDE Model TS - 2000 Condition Used

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60-SNG L GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Iisdpfsflz Hfsx Apcja Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 110kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Transport : TWO containers. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * LOW SHIPMENT COST(TWO 40F-OT containers or TWO standart trailers) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 60 m³ / 80 m³ Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x14.500 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. Isdjxp D D Nopfx Apcsia The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1619201, Nuova CMM Twin Head Weld Overlay Cladding Line (2016) 2x heads for electro slag strip cladding< 90mm parallel strip width operation Automatic 'slalom' pattern axial head movement after each circumferential welding pass for continual operation 3,600mm diameter capacity 2,500 - 11,000mm length capacity 900mm minimum working height 500kg coil strip capacity 6x Miller SubArc DC 1250 Digital welding power sources Iiedpfx Apoy Azcrjcoa 2x Miller Coolmate 4 fans Miller SubArc Interface Digital control box

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 400 V, total height: 2,890 mm, total width: 2,440 mm, total length: 2,890 mm, Mobile Welding Station 10ft for PE/PP Pipes incl. HÜRNER CNC 500 (SST Series) Weather-Independent Butt Fusion Welding at Industrial Standards Ijdpfeyzn Ifsx Apcjia Stop building makeshift welding tents on site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell for demanding PE/PP pipeline construction. Plastic weld seams do not tolerate drafts or moisture—this container guarantees consistent, standard-compliant environmental conditions and complete documentation. Your advantages in pipe handling: The bottleneck on site is the handling. This station is uncompromisingly designed for ergonomic efficiency. Pipe sections are passed directly through the container using the 800x800 mm end-side pipe doors (with integrated brush seals). The built-in 1,000 kg lifting table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-person job. Plug & Play: Connect power and start welding. Technical Data (SST 10 / 500): Container: 10" High Cube, Double Door, One Way (incl. chequer plate steel floor) Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management Working range: OD 200 to OD 450 mm (including reduction inserts) Lifting technology: Electric lifting table (1,000 kg), electric chain hoist with trolley/manual trolley (3m lift) Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe doors (800x800 mm) Power supply: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), RCD 63A Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fittings Condition: Fully prepared for welding (CE), incl. DGUV inspection & 2x thick coat paint (color of your choice) (Note: Supplied without power generator) Available configurations in this series: This listing refers to version SST 10 / 500. We manufacture these stations in four standardized performance classes to suit your project: SST 10 / 355: 10-foot container, suitable up to OD 355 mm SST 10 / 500: 10-foot container, suitable up to OD 450 mm (offered model) SST 20 / 355: 20-foot container (extended work area), suitable up to OD 355 mm SST 20 / 500: 20-foot container (extended work area), suitable up to OD 450 mm Custom modifications are available on request. Contact us for a detailed quotation.

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display Iiodpfjg Dvdcjx Apcja - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Ijdpjx Ebzqofx Apceia - weight: 800KG Made in Germany The pictures show you an older bigger machine

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. For further information, please feel free to contact me. Iedpjyzimcofx Apcsia

Year of construction: 2002, condition: ready for operation (used), A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026. Iiodpfx Apjyh Nvaecja

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Isdsyyxvwjpfx Apceia

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided Iiodpex E Rd Dsfx Apcsa The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. Iedpfsxmiirsx Apcjia CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Year of construction: 2010, condition: ready for operation (used), A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible. Iedjyt N Ayspfx Apcjia

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines - Double point welding is perfect technology for thicker wire diameters Ijdpoymb Unjfx Apcjia Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Technical data: Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m Iijdpfxjymaute Apcoa - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Ijdpsyman Hjfx Apcsia Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444