Used Maweg Se Ii for sale (11,638)

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW Nlodpfx Aozp N Ersa Rsf - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), Year of construction: 2001, Quaser MV 204 II + 4th axis indexing head Year of manufacture: 2001 Control system: - Siemens 810D - Electronic handwheel Spindle: - Max. 10,000 RPM Nsdpfozwmv Rox Aa Rslf Travel distances: - X – 1020 mm - Y – 600 mm - Z – 560 mm Table: - Table size 1200 × 635 mm - Max. table load 1000 kg Tool changer: - 24 magazine positions Availability: - Immediately available

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Nedpfx Aaszk Nwke Relf Location: Röllbach

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 1729, functionality: fully functional, empty load weight: 10,000 kg, workpiece width (max.): 5,500 mm, workpiece height (max.): 980 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item on time, no later than June 22, 2026! TECHNICAL DETAILS Workpiece width max.: 5,500 mm Workpiece height max.: 980 mm Number of working stations: 8 Number of cylinders per press level: 10 Number of clamping devices per press level: 10 MACHINE DETAILS Power of main motor: 1.5 kW Press drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,200 x 2,450 mm Unladen weight: 10,000 kg Transport packages: 1 EQUIPMENT Nsdpfey Tviujx Aa Rslf CE marking Separate press stages Motorized rotation 2 working stations per side

Condition: ready for operation (used), Description: Geiger MiniServo II 1.5, a servo-motorized removal device or sprue picker, specifically designed for use with injection molding machines. The device is used to precisely and quickly remove sprues or small finished parts from the mold and place them in a designated area. Swivel axis (A): 0-105° Removal stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motorized drive for the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for the gripper 1 compressed air circuit for the rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard removal sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable, 5 m Placement area behind and in front of the machine RAL 9016 white Additional control unit HT7, vacuum circuit, and consoles Input voltage: 230 V Nedpfx Aaezpzhre Rslf Since I was unable to observe the device in operation, I cannot provide any guarantee. According to maintenance records, it is in good condition, but it has experienced occasional malfunctions (1 to 2 times per week). Turning the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit for this reason.

Condition: ready for operation (used), Endress + Hauser FDL 30-FGB2A7R Liquiphant II level sensor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdei D Ur Aspfx Aa Relf

Condition: ready for operation (used), Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpfx Aei D I I Noa Rjlf

Condition: used, For enquiries regarding the vibratory plate, please contact Mr. Herden (by phone). WEBER CR 5-II Hatz Diesel Vibratory Plate / New machine / In stock & immediately available Sale price: €6,290.00 net / €7,485.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out with their powerful compaction performance and highest efficiency. They are therefore the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure excellent operator comfort. Nodpfx Aeymv R Rea Relf CR 5 – The all-rounder: - Infinitely variable forward and reverse travel. Hydraulic direction change - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide handle - Protection for machine and engine with engine protection frame and hood - Reduced maintenance through the self-tensioning centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and fast loading thanks to the large, foldable crane eye - Areas of application: earthworks, landscaping, bedding of concrete pavers, and compaction of sand, gravel or crushed stone Technical data: Engine: Hatz Diesel Engine power (max.): 5.4 kW (7.4 HP) Weight: 296 kg Centrifugal force: 42 kN Frequency: 77 Hz Working width: 55 cm Upon request, we are happy to provide a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. With over 800 used vehicles, we are also among the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Further information = New: Yes Engine make: Hatz For more information, please contact Marius Herden.

Year of construction: 2012, condition: refurbished (used), machine/vehicle number: 25797, Automatic labeller Brand: Wilux, Type: PAS2202 / Label set II-A6310-RH-P Year of manufacture: 2012 Serial number: 25797 Maximum width of the roller: 80 mm Electrical connection: 230 V Own weight 80 kg Total size: L = 1000 mm x l = 800 mm x H = 1900 mm The machine has been tested and runs perfectly. Requires synchronization on the workflow with a transfer table/band and a bandwidth sensor. The labeller has a technical book and electrical drawings. For Romanian companies, there is the possibility of selling in instalments with a 50% advance. Price: 2900 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania Nlodpog H Tl Tsfx Aa Ref A separate guarantee is provided upon request, for a fee. You can make us a firm offer if you are interested in this automatic labeller. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL Nedpozv Salofx Aa Rslf • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application The system is intended for, among others: • Pharmaceutical laboratories • Quality control • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Additional photos, serial numbers, and information about the device can be provided upon request.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Njdpoxmr Rxofx Aa Rjlf Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Nlodpezd Hm Nefx Aa Rsf Storage location: Nattheim.

Condition: used, Type EURO SPEZIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1,5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Nljdpfxjzvlncj Aa Rof Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Njdpfxjzkvl Is Aa Relf

Condition: used, double-acting hand lever cylinder Nodpfx Aozkl T Iea Rolf Storage location: Nattheim

Condition: like new (used), Year of construction: 2014, load capacity: 7 kg, arm reach: 800 mm, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: LBR iiwa 7 R800 MODEL YEAR: 2014 TECHNICAL SPECIFICATIONS PAYLOAD CAPACITY: 7 KG MAXIMUM LENGTH: 800 MM Nedpfxozvyrio Aa Relf CONTROL UNIT: KRC4 SUNRISE

Condition: new, Year of construction: 2025, Screen drums suitable for all common screening machines such as Doppstadt SM 314/ SM414/ SM518/ SM618/ SM620/ SM720/ SM 725, Terra Select T4-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55, 20.72, Terex, Neuenhauser, and others. - Manufactured according to your specifications: - Perforations (including variable hole patterns within the drum) - Square or round perforations - Offset or straight layout - Minimal web widths - Welded-in spiral flights - Available in various material thicknesses - Perforated sheets with sharp edges, highest quality - Perforated sheets made from special steel Nledpfx Aexn A D Sja Ref We deliver our drums free to your door. Many models available from stock without waiting time.

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Nlsdpfxjvvkl Ds Aa Rsf

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length Nlsdpjzqgg Asfx Aa Ref 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood MAWEG ROTOR 6000. Material size 6000 X 900 x 200mm 4 working areas, automatic rotation. Nedpfx Ajzraalea Rolf 12 pcs hydraulic cross pressures per 1 area 12 pcs hydraulic surface pressures per 1 area Self weight 7000kg. Very good condition. Available immediately.

Condition: excellent (used), MAWEG SATURN DUO grinding machine - after the technical review - very good condition - belt length 1800 mm TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min Njdjf N Nflepfx Aa Relf feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg

Condition: new, Year of construction: 2014, functionality: fully functional, Lightweight robot, Cobot KUKA iiwa 14 R820 Sunrise, cabinet, new/original packaging Serial number: 981258 Year of manufacture: 12/2014 Number of axes: 7 Max. payload: 14 kg Max. working range: approx. 820 mm Scope of delivery: Robot, controller, cables, teach panel Nlodpfx Ajzmtrqea Rof Used item – normal signs of wear. Further details, article numbers and pictures available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Due to the weight and size of the robot, it could be shipped within Germany for €95 gross. Shipping costs to foreign countries on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Nljdpfx Aaozpyq Ee Rsf

Condition: like new (used), Various inserts for the Maweg gluing press. Nljdpfofl Ikkjx Aa Ref Various dimensions, mostly unused. Made of laminated oak.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock Nedpfxoh S Uhfj Aa Rjlf - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.