Used Mazak Cnc 5-Axis Machining Centre for sale (99,089)

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Rodpfxey Shk Uo Amgecb Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm Rjdoyyybhepfx Amgocb ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Rodoygw E Njpfx Amgjcb

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Redpfjyu Twkjx Amgscb Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg Rodpfx Amjvt D D Uogjcb good condition

Year of construction: 2006, condition: ready for operation (used), Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places. Rcedpota H S Sefx Amgjb

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Rodpfx Ajx Aunxomgocb

Condition: used, Year of construction: 2014, - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 Rcodpfx Ajx Hwhxjmgeb - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible. Rcedpfx Amjzadkregjb

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: MAZATROL Smooth, workpiece weight (max.): 2,500 kg, total height: 3,419 mm, total length: 5,250 mm, total width: 4,300 mm, table width: 820 mm, table length: 3,500 mm, overall weight: 16,800 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 48, tool length: 350 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC Machining centre MAZAK VTC 800 30SR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 CNC control: MAZATROL Smooth Number of simultaneous axes: 5 Stroke X axis: 3000 [mm] Stroke Y axis: 800 [mm] Stroke Z axis: 720 [mm] Feed rate on X, Y and Z axes: 50000 [mm/min] Traversing feeds X, Y and Z axes: 50000 [mm/min] Min. distance spindle nose / table: 140 [mm] Max. distance spindle nose / table: 860 [mm] Redpfxoy U Udys Amgscb Table length: 3500 [mm] Table width: 820 [mm] Max. load on table: 2500 [Kg] B axis swivelling stroke: +110 [°] / -110 [°] [°] Table surface: Ø 500 [mm] Stroke C axis: table revolution 360 [°] Spindle type: CAT No.40 Max. spindle speed: 18000 [rpm] Spindle power: 35 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 350 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Machine dimensions: 5250 x 4300 x 3419 [mm] Weight: 16800 [Kg] INCLUDED EQUIPMENT: x1 MAZAK type DS50C-R1-Z5th-axis NC rotary table Ø500 [mm] – 360,000 positions x1 electronic handwheel x1 spindle chiller x1 high-pressure coolant pump 15 [bar] x1 chip conveyor More information upon request.

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Rodpfxeyz R Hdo Amgscb Modifications and errors in the technical data and information excepted.

Condition: good (used), Year of construction: 1999, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 800 mm, spindle speed (max.): 14,000 rpm, total height: 3,720 mm, total width: 4,520 mm, total length: 7,200 mm, For sale is a high-performance CNC machining center (milling center) with a moving column. It is in fully functional condition. Please note the integrated high-speed vertical spindle with up to 14,000 rpm as well as the powerful SIEMENS 840D CNC control with an integrated rotary table for complex multi-axis interpolation. Technical data: Year of manufacture: 1999 Control: Heidenhain TNC 430 X-axis: 1,200 mm Y-axis: 700 mm Z-axis: 800 mm Rapid traverse: 30,000 mm/min Working feed rate: continuously variable, max. 30,000 mm/min Spindle speed: continuously adjustable 100 – 14,000 min⁻¹ Max. drive power: 25 kW Max. torque: 250 Nm Speed: 14,000 rpm Tool holder: HSK A 63 Tool magazine: 92 positions Integrated rotary table dimensions: 800 x 700 mm Max. workpiece size: Ø 900 mm Machine dimensions: 7,200 x 4,520 x 3,720 mm Weight: 17,500 kg Rcjdpszadi Iofx Amgjb Equipment & accessories included in the offer: Automatic central lubrication Chip conveyor Coolant tank / coolant supply Accessories not included: Clamping devices, zero-point clamping systems, chip containers, tool holders On request, transport and loading can be arranged throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Redewz I Acjpfx Amgocb Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: not inspected (used), Year of construction: 2008, operating hours: 12,799 h, functionality: unexamined, machine/vehicle number: 14508674, This Fehlmann Picomax 60-M – 5-axis CNC machining center, including accessories, is being auctioned off in our online auction “Zink Feinmechanik-Sondermaschinen GmbH – CNC Machining Centers – Tool Holders – Tools – Workshop Equipment.” Machine Data: Manufacturer: FEHLMANN AG Maschinenfabrik Machine Type: PICOMAX 60-M Machine No.: 14508674 Year of Manufacture: 2008 Control: Heidenhain iTNC 530 Operating Hours: 12,799 Spindle Hours: 5,303 Weight: 3,350 kg Technical Details: Rcodpfx Ajy Uxa Eomgjb Travel in X-axis: 505 mm Travel in Y-axis: 355 mm Travel in Z-axis: 610 mm Feed Rate (max.): 18,000 rpm Number of slots in the tool magazine: 24 Simultaneous machining in 4th/5th axis Scope of Supply: - Renishaw probing system - Tool measurement - Floor mat - Coolant system - Tools in the lower cabinet - Transport securing devices as shown in the picture without any other items shown Functionality not tested You can find this and many other items from the fields of precision engineering, workshop equipment, CNC technology, CNC accessories, tool holders, and more on our RESTLOS auction platform!

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1800/2000/1100 mm Tool holder : HSK 100 In General: Year of manufacture:2007 Control system:Heidenhain iTNC 530 Travel distances X/Y/Z:1,800/2,000/1,100 mm Rotational speed:12,000 rpm Media feed-through:Blast air + cooling lubricant Rcodpfx Asy Uqplsmgob Spindle: Technology:Motor spindle Speed:12,000 rpm Power:44 kW Torque:288 Nm Tool holder:HSK 100 NC swivel head: Technology:Universal milling head B-axis:0°-180° NC rotary table: Technology:Rotary table with pallet carrier C-axis:360° Clamping surface:1,600 x 1,400 mm Max. table load:4,000 kg Holding torque:approx. 17,000 Nm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct scales in all axes Chip disposal:Chip conveyor Coolant supply:Internal c oolant system, 40 bar Automation:2-fold pallet changer Workpiece measurement:Heidenhain touch probe Tool measurement:Blum Laser NT Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Emulsion mist separator:Mechanical

Condition: good (used), Year of construction: 2012, 5-axis CNC machining center Manufacturer: AXA Machine model: VPC-2800U Control system: Siemens Year of manufacture: 2012 Technical data Working area - X-axis travel (mm) 3,900 - Y-axis travel (mm) 2,940 - Z-axis travel (mm) 1,100 CNC rotary table - Clamping surface (mm) ø 2,800 Feed drive - Max. rapid traverse rate in X/Y/Z (m/min) 30/30/25 Main spindle - Standard drive No. 140 Spindle speed range (rpm) 30-7500 Spindle power max. continuous duty 100% (kW) 63 Spindle torque max. continuous duty 100% (Nm) 191 Tool holder: SK50 Swiveling head Rsdpfsy Txt Nsx Amgecb - Swiveling range B-axis (degrees) 90 - Indexing: freely interpolating Tool changer - Number of tool positions: 60 Please note: The machine is NOT equipped with a rotary function. Subject to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position Rcsdpsy Txrxjfx Amgsb - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WPC, YEAR OF MANUFACTURE 2012 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVELS X 600 Y 450 Z 450 B +45º/-120º C n x 360º SPINDLE 20,000 RPM, 36 KW, HSK-A63 (NEW) Rcodpfx Asy Twccsmgjb SCALES ON X, Y, Z 220-TOOL CHANGER 7-PALLET CHANGER DYNAFIX 280 x 280 MM TOOL MEASUREMENT PROBE PART MEASUREMENT PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, YEAR OF MANUFACTURE 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C +360º SPINDLE 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES IN X, Y, Z 220-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER Rjdoy Twa Ujpfx Amgecb SPINDLE COOLING SYSTEM

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, YEAR OF MANUFACTURE 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C x 360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM Redsy Tv Nbepfx Amgecb RENISHAW OMP60 PART PROBER LASER TOOL MEASUREMENT CHIP CONVEYOR WITH TSC MACHINE WEIGHT 19,000 KG

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 Rcodpfx Aewl R Ddjmgeb WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: used, Year of construction: 2005, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table height: 500 mm, spindle speed (min.): 10,000 rpm, 5-axis Vertical Machining Centre CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10.000 1/Min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Rjdpfx Amsy Ryylegjcb Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Redpfex Hllxox Amgocb Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality. Rjdpsyuw Srsfx Amgjcb

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Rsdpfow Rm Diex Amgjcb Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg