Used Measuring Stick for sale (7,123)

Condition: used, Vernier caliper, caliper, vernier caliper Isdpfx Acsr A H Sqjpebc -Manufacturer: Holex, digital caliper .: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Condition: good (used), Calipers, calipers, calipers -Measuring range: 0-350 mm -Price: per piece -Number: 1x calipers available -Dimensions: 385/127/H10 mm Ibjdpfsd N N Dnox Acpjc -Weight: 0.4 kg

Condition: used, Vernier caliper, caliper, caliper Iodpfxsg Si Nzs Acpobc -Caliper: Vernier caliper measuring range 0-630 mm -Nonius: 0.05 mm -Dimension: 745/190 / H10 mm -Weight: 1.3 kg

Condition: used, Vernier caliper, caliper, caliper -Measuring range: 0-250 mm -for: internal measurements -Number: 1x caliper available -Price: per piece -Weight: 0.75 kg Ibedpfx Ajcb T R Tscpoc

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! ONLY 6,500,- Original price over 38,000,- Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate, it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g. of cams on a camshaft, or journals of a crankshaft; it is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer; a newer, more modern HP model with a small form factor is included. Max. diameter 350mm Max. test piece height 500mm (higher measurements up to max. 1000mm can be taken by measuring in two halves....) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. Ibedozcqy Espfx Acpsc The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password....). It is also on the USB stick, perhaps to install it on another machine at your location. Accessories are included, the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets via a shipping company. It is already securely fastened to them. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and wrapped with stretch film for transport on the pallets. The system itself is fixed with "transport safety screws".... Shipping is at the buyer's expense and will be carried out on two Euro pallets.... The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on site; this is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, there are several locking screws for transport; if you forget them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide many years of excellent service!!

Condition: used, Year of construction: 2021, functionality: fully functional, Equipment: type plate available, We are offering this used Keyence VHX-S750E measuring system, manufactured in 2021. Model: VHX-S750E Serial number: 8B120052 Country of origin: Japan Features: • VHX-7000 camera head • Motorized stand Isdjz Hipvepfx Acpobc • Control panel (Remote Console) • Integrated VHX monitor • Specimen stage • Standard lighting unit • Housing in good condition • No obvious damage 1. Software license available, but not accessible; no USB stick included. 2. No written proof of functionality; the microscope can be tested before purchase. 3. No additional lenses available. 4. No calibration certificates. 5. Manufactured around 2021; originally purchased as new. 6. Includes the original PC/controller in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: P/N 6159351410, For sale is a professional, mobile torque measuring device, Desoutter ALPHA D5 (model number: 6159351410), in the complete original set. Ibsdpfjz I Ucwsx Acpsc The device is in excellent, well-maintained condition and comes from a professional industrial quality assurance department. It has been regularly serviced. The internal test program has recently been successfully completed – the display and all functions are working perfectly. The device has a verifiable calibration history, documented by official test stickers directly on the device: • First documented test: 03/2019 • Subsequent measurement: 04/2021 • Last official calibration: 06/2023 (Therefore, it has been used and fully documented within the industrial standard cycle). Technical data at a glance: • Measuring range: 0.5 to 5 Nm (Low Torque Analyzer – ideal for highly precise power tools) • Accuracy: ±1% of the reading (in the range of 20% - 100%) • Operation: Integrated battery (fully functional, holds the charge) or via the included power adapter. • Modes: Track & Peak display Scope of delivery (as shown in the photos): • Desoutter ALPHA D5 measuring device • Original, robust Desoutter transport case with a custom-fit foam insert • Original power adapter / charger (black) • Original Desoutter USB stick (contains documentation and the software for data transfer / report creation on a PC) The device is sold as shown in the complete set. It is perfectly suited for workshops, laboratories, or production facilities looking for a reliable and precise testing tool.

Condition: used, FARO Gage Plus F4 Measuring Arm / 3D Coordinate Measuring Arm FARO Gage Plus F4 Mobile measuring arm with CAM2 SmartInspect Pro and extensive accessories. For sale is a used FARO Gage Plus F4 measuring arm with CAM2 SmartInspect Pro software and extensive accessories. The mobile measuring arm is suitable for industrial measuring and testing tasks as well as for the acquisition and control of component geometries. Technical data: Manufacturer: FARO Model: Gage Plus F4 Device type: Mobile 3D coordinate measuring arm / measuring arm Revision: 23.5 Accuracy specification: 5 + 8L/1000 µm Country of manufacture: Switzerland Certification date: 12.06.2019 Software: FARO CAM2 SmartInspect Pro Software key as shown in the pictures USB stick as shown in the pictures Equipment: FARO Gage Plus F4 measuring arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the pictures Measuring and probing accessories as shown in the pictures Tool and accessory case FARO protective cover Documentation / documents as shown in the pictures Additional accessories as shown in the pictures Areas of application: Industrial metrology Quality assurance Component testing Geometry testing Production control Workshop and measuring room Scope of delivery: 1 × FARO Gage Plus F4 measuring arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the pictures Tool and accessory case Measuring and probing accessories as shown in the pictures FARO protective cover Ijdpfx Acszxy Sbepsbc Documentation / documents as shown in the pictures Accessories as shown in the pictures Overall dimensions of measuring arm: not clearly defined as L × W × H Arm segment dimensions: 398 / 213 mm Measuring range: 1.5 m Weight of measuring arm: approx. 8.1 kg Transport case: Dimensions: approx. 1,145 × 409 × 330 mm Shipping weight: approx. 26 kg Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2005, functionality: limited functionality, Description MEASURING ARM IN SUITCASE. EQUIPMENT WE CAN SEND FOR CUSTOMER WOLDWIDE Iedpfx Acevlaq Iopjbc Specifications Manufacturer FARO - SWITZERLAND Model PLATINUM P04 Year 2005 Condition Used

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 075440, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, The machine was overhauled in 2022! TECHNICAL DETAILS Iodpjz Izdzjfx Acpjbc Measuring range, X-axis: 1,200 mm Measuring range, Y-axis: 2,500 mm Measuring range, Z-axis: 1,000 mm Accuracy MPE E: 2.6 + L/300 µm MACHINE DETAILS Machine height with extended damper: 3,485 mm Machine height without extended damper: 3,470 mm EQUIPMENT CNC control WPC, 3 axes Probing system Renishaw PH10M Scanning probe Renishaw SP25 Scanning kit 2 Probe stylus lengths: 50–100 mm Probe changing rack Renishaw FCR25 Number of probe changing slots: 3 Probe changing rack: not populated Ergonomic handheld control panel HT400 PC system with Windows 10 Professional TFT monitors: 2 × 24 inches WM QUARTIS CNC control geometry software, Version 2025 WM QUARTIS CNC free-form surface applications, Version 2025 WM QUARTIS CNC CAD import interface STEP, Version 2025 USB user dongle with software license Small probe stylus kit M3 Reference sphere PC and controller trolley with desk combination

Condition: used, Year of construction: 2011, functionality: fully functional, Auriga 60 Computer-Controlled FE-SEM with patented GEMINI® electron optics and field emission cathode, designed for analytical applications and high-resolution imaging under high-vacuum conditions. Year of manufacture: 2011 FIB column type: Cobra FIB column SEM column type: Schottky field emitter Installed detectors: • SESI (commercial) • InLens • ESB • 4QBS (pneumatic) • STEM (pneumatic) • EDX X-MAX 80 mm (Oxford) • EBSD (HKL Channel 5) • Charge compensation Gas injection system: Platinum Maintenance report: The system has been serviced annually, with a service report provided each time. Operating hours: 13,290.33 hours (with current filament) PC and software included: Yes Included components: All pumps, cooling systems, and control units are included, except for the dampers. Software Version: • SEM: SmartSEM Version 6.00 (June 9, 2016) • EDX: INCA software package – Version 5.03 Price: Negotiable price excluding VAT and delivery Ibjdpfx Acozz H I Iopec

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears Ijdpjymfz Sefx Acpebc - Machine concept designed for the shortest set-up and changeover lines and maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer - Operating elements and PC protected against unauthorized access with lockable cabinet element

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, Ibedpfxey Taixe Acpjc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, type plate available, Shimadzu AGS-X 10 kN universal testing machine with TRViewX 800D video extensometer Price: €18,500 excluding VAT, negotiable Used Shimadzu AGS-X tabletop universal testing machine, originally ordered from Shimadzu in 2022 by Roffelsen Plastics Slovakia. Extensively equipped for tensile and three-point bending testing, with two load cells, pneumatic specimen grips, Trapezium-X software, and a TRViewX 800D non-contact video extensometer for measuring specimen elongation. Suitable for materials testing and quality control involving plastics, elastomers, tapes, cords, and other compatible specimens. Included equipment: • Shimadzu AGS-X testing frame, maximum capacity 10 kN. • 10 kN and 2 kN load cells, specified as accuracy class 1. • TRViewX 800D video extensometer. • Control PC with 24-inch monitor and Trapezium-X Single software. • Pneumatic quick-change grips, rated to 10 kN, with pyramid-pattern and diamond-coated inserts. • Pneumatic wrap grips, rated to 10 kN, for specimens measuring 0–9 mm. • Three-point bending fixture specified for EN ISO 178, R5, with digital displacement measurement and accessories. • Grip-control foot pedals, pneumatic tubing, mounting adapters, and alignment fixture. • Dedicated machine table. Isdpfxsz Rt Irj Acpebc • Mitutoyo micrometer and caliper with data-transfer cables; micrometer stand. Technical specifications: • Crosshead speed: 0.001–1,000 mm/min. • Maximum return speed: 1,500 mm/min. • Test-space width: 425 mm. • Maximum crosshead-to-table clearance: 1,200 mm without grips. • Machine dimensions: approximately 653 × 520 × 1,603 mm, excluding table. • Machine weight: approximately 85 kg, excluding table and accessories. • Electrical supply: single-phase 200–230 V, 50/60 Hz. • Compressed air required for pneumatic grips. Latest calibration: The machine is regularly calibrated. Location: Ivanka pri Nitre, Slovakia. Price excludes transport and installation. Collection and shipping arrangements to be agreed with the buyer.

Year of construction: 2015, condition: excellent (used), Various sticks, year of manufacture approx. 2015 Iodjxz Sdhjpfx Acpsbc

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) * Ijdpfx Aju S Izcecpsbc

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Ibodpezrvg Uefx Acpsc Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended. Ibedpfx Ajzz Hq Aecpoc

Condition: used, Year of construction: 2010, functionality: fully functional, repeat accuracy: 0.032 mm, arm reach: 3,000 mm, Equipment: type plate available, Portable articulating arm coordinate measuring machine (CMM) from the Swiss manufacturer FARO, part of the Quantum series, for mobile coordinate measurement directly on the machine or in the production area. Can be used for quality assurance and incoming goods inspection, reverse engineering, CAD nominal-actual comparison, as well as for the alignment and testing of tools and machines on-site. Technical data (according to the nameplate): Manufacturer: FARO, Made in Switzerland Model: Quantum, Rev. 3.0 Serial number: Q10-02-10-25834 Year of manufacture: 2010 Repeatability (Single Point): 0.032 mm Volumetric accuracy: 0.046 mm Last certification: 05/03/2023 Condition: used Scope of delivery: FARO Quantum measuring arm with handheld probe Mounting base USB dongle with FARO CAM2 and PowerInspect software (version and license transferability not confirmed) Two accessory cases and a fabric bag Original hard-shell transport box Note: Temperature compensation as specified, no guarantee. Sold used, as is, without warranty and without the possibility of return. Delivery EXW. Ibsdpfjz Rl Azsx Acpec The measuring arm is located in the Leipzig area and is ready for pickup.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 3,200 mm, measuring range Z-axis: 2,100 mm, workpiece weight (max.): 4,500 kg, total height: 3,660 mm, type of input current: AC, total length: 4,800 mm, overall weight: 11,000 kg, input voltage: 230 V, table width: 3,200 mm, table height: 725 mm, table length: 4,800 mm, year of last overhaul: 2024, Equipment: documentation/manual, type plate available, Dual-column CMM * Floor-mounted design (measuring plate in one piece, 5000 x 3100 mm) * Measuring plate is decoupled with active vibration isolation Measuring range * X 4,000, Y 2 x 1,600 (3,200), Z 2,100 [mm] * Overlap of columns in Y = 150 [mm] Measuring uncertainty Single column: 20 + L/60, max. 60 [µm] at L = 4,000 mm Dual column: 40 + L/35, max. 80 [µm] at L = 4,000 mm Dynamics 3D traversing speed 433 mm/sec 3D acceleration 768 mm/sec² Probing system (per column) * HEXAGON HH-AS2.5° * Optical laser scanner, type HP-L-10.10 Ibedpfx Ajz Rpmwecpec Controller (per column) * DC800 ETH Wireless operating unit * Portable terminal with display Computer (per column) * DELL Tower, 24" monitors * According to the software manufacturer's specifications Software (per column) * PCDMIS CAD++ 2026.R1 * Option: Laser sensor HP-L-10.10 * Dual-column function Extensive accessories * Calibration sphere holder - tactile probes - equipped with 3 * Calibration sphere holder - optical laser - equipped with 2 * Variable stylus assortment * 8-position modules in various lengths * SICK light curtain system integrated for automatic operation, all-round Supplier services * Transport, commissioning, calibration, final acceptance Warranty * 12 months, from the date of acceptance Availability * Short-term

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces, such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate that serves as a measuring table, with a laterally mounted guide system, enabling open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Iedpfx Ajzz Hywscpsbc Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary-tilt head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 µm+ (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery: Without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unobstructed Accessibility: Due to the lateral guidance of the horizontal arm, the measuring table is freely accessible, which facilitates the placement of heavy workpieces using a crane or forklift. Multi-Sensor Capability: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs on request!

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Ibedpfxjxv A T Ne Acpjc Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: excellent (used), Year of construction: 2018, We are selling our Faro Quantum S measuring arm, including the Polyworks software package. Year of manufacture: 2018, last calibration: 2024. Comes with various accessories. Ibedsz Rkncopfx Acpec Ready for immediate use.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) Ibodpfxjz Hw Elo Acpsc - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, We offer this as new Tesa 01110000 TESA UNIMASTER measuring system, year of construction 2012. Extension rod length: 600 mm Extension rod length: 450 mm Extension rod length: 300 mm Extension rod length: 150 mm Extension rod length: 125 mm Extension rod length: 100 mm Iedpfxjzqc Nms Acpsbc Extension rod length: 75 mm Extension rod length: 50 mm Extension rod length: 25 mm If you have any questions or need more information, feel free to send us a message or give us a call.