Used Meba Bio Qz 900 for sale (5,584)

Condition: used, Year of construction: 2012, overall weight: 4,000 kg, input voltage: 400 V, Equipment: documentation/manual, We offer this used MEBA Bio QZ 900 shredding system, manufactured in 2012, for sale. Manufacturer: MEBA Model: Bio QZ 900 Year of manufacture: 2015 Nwodpfx Aisz Tfmfe Tsn Condition: used Category ID: 568 Type ID: 304 Machine type: shredding system, cross-flow shredder The machine was used as a shredder in a biogas plant. However, it can also be used for other shredding applications. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Njdpfx Ajz I Ig Noi Tswn Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1100 DG, total length: 2,300 mm, total width: 2,300 mm, total height: 2,300 mm, type of input current: AC, pivoting range: 120 °, input voltage: 400 V, overall weight: 5,400 kg, cutting range round steel at 45°: 510 mm, cutting range round steel at 90°: 510 mm, space requirement height: 2,500 mm, space requirement length: 2,300 mm, space requirement width: 4,400 mm, cutting range square steel at 45°: 700 mm, We are offering this used MEBA MEBASteel 1100 DG double mitre saw, manufactured in 2014. Manufacturer: MEBA Nedpfjzx N Tzjx Ai Tewn Model: MEBASteel 1100 DG Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Nwsdpfxexv D Dce Ai Tsn Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 4,000 kg, Good morning, Nodpozd Ag Sjfx Ai Tswn We have a German-made Meba automatic bandsaw for sale. The machine is in virtually perfect condition. Below is a description of the machine and its features. Designed for fully automatic and efficient production in the steel industry and trade, for cutting solid materials and difficult-to-machine materials. A 2-column automatic machine for cutting at a 90° angle, with a heavy, closed design that dampens vibrations. Minimal space requirement with the highest demands and best cutting results. Technical data: Parameter Round stock Rectangular profile Cutting range: 90° ø 430 mm 430 x 430 mm Maximum machine load: 1000 kg/m Cutting length: * Single stroke: 0 - 600 mm Multiple stroke: 0 - 9999 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless. Adjustable via NC control. Drive power: * Cutting blade: 7.5 kW; 400 V, 50 Hz Hydraulic system: 0.37 kW Coolant pump: 0.37 kW Cutting frame feed: Stepless up to 300 mm/min Cutting blade tension: Hydraulic Cutting blade dimensions: 6220 x 41 x 1.3 mm Length of lead-in (waste): In automatic mode: 25 mm (rectangular material) / 50 mm (round material) Working height: 750 mm (without mounting elements) Weight: 4100 kg Dimensions (L x W x H): 1700 x 3100 x 2350 mm (including chip conveyor) Equipment: -Automatic chip ejector -Chip trolley -Blade break sensor -Blade deviation sensor -Zero face (material positioning) -Interface for importing and exporting data via USB memory -Material database (automatic parameter selection, >500 materials, MEBA blade selection) -Oil mist lubrication -Adjustment of clamping force -Package clamp -Receiving table -Gun for rinsing chips from the machine -White color -Status signal column -Central lubrication -Infeed roller conveyor 3000x500 equipped with 9 rollers We are the official distributor of the Meba brand in Poland. The bandsaw has been inspected and found to be ready for further operation for many years to come.

Condition: used, Year of construction: 2014, 35/75 m/min dimensions of saw-band 3350x27x0,9 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 300x260 mm capacity 45 degrees: round 200 mm capacity 45 degrees: flat 180x180 mm 130 mm 120x120 mm 25 mm Nwjdpjy Ty Eysfx Ai Ton 90 mm min. dia. 5 mm work height max. 750 mm total power requirement 1,1/1,8 kW dimensions 1900x1500x1860 mm weight of the machine ca. 900 kg weight 660 kg

Condition: excellent (used), For sale: a professional, German-made MEBAeco 335 DG band saw from the highly regarded Eco-line series. This is a two-column machine with exceptional rigidity, designed for precise and efficient cutting of steel, profiles, and solid materials. The machine is in full working order, ready for use, and was used in a clean workshop (visual and technical condition can be seen in the photos). Why MEBAeco 335 DG? Nodpfj Adytaex Ai Town • Two-column construction (linear guides): Ensures perfect cutting geometry, minimal vibration, and significantly longer cutting blade life compared to frame-type machines. • Double-sided angle cutting (DG system): Rotating table system – when changing the angle, the machine table is not notched! The vise automatically adjusts to the selected angle and always firmly holds the material close to the cutting line. • Full semi-automatic operation: After pressing start, the machine performs the cut, raises the arm to the set height, and opens the vise. • Smooth blade speed adjustment: Control via a frequency converter allows you to perfectly adjust the speed to the type of steel (from stainless steel to black steel). CUTTING PARAMETERS: • 90°: round Ø 335 mm | rectangle 500 x 335 mm • 45° to the right: round Ø 330 mm | rectangle 320 x 335 mm • 45° to the left: round Ø 305 mm | rectangle 305 x 335 mm • 30° to the right: round Ø 180 mm | rectangle 170 x 335 mm TECHNICAL DATA: • Motor power: 3.0 kW • Blade dimensions: 4400 x 34 x 1.1 mm • Blade speed: continuously variable, 15 – 150 m/min (frequency converter) • Machine weight: approx. 1020 kg (massive, stable construction) • Equipment: Ergonomic control panel, integrated cooling system, brush for cleaning the blade from chips, built-in feed roller. ADDITIONAL INFORMATION: The machine can be viewed and tested on-site. We can assist with loading (forklift available). Price: 6200 euros (negotiable / VAT invoice available)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, German band saw MEBA Ratio 300 -Semi-automatic -two-column -cutting diameter 300mm -max dimension 300x500 -floating speed control (inverter) -4800x34x1.1 belt -cooling systems -fast vise clamping -belt cleaning -feed auxiliary roller -feeding table (not in the picture) -German WIKUS cutting belts new 10 pcs (value about 3000 zł) -CE -net price -possible delivery to any place in the country Machine very little used like new from 2021 in perfect technical condition . SPECIALIZATION ( since 1987 on the market! ) METAL saws & Largest selection in the country I have other band saws for metal of all types and bring on individual orders professional equipment from 200mm>1000mm diameter cutting material Automatic / Semi-automatic / Manual NO ! is a "Chinese" like many offered here branded professional machines !!! ONLY PROFII MACHINES !!! BE SURE TO SEE MY OTHER AUCTIONS !!! I SELECT MACHINES W/ INDIVIDUAL NEEDS ! YOU NEED A GOOD MACHINE AT A GOOD PRICE CALL Nwedpfxoug Hpzs Ai Ten

Condition: excellent (used), Viessmann Vitoplex 900 kW. Biogas container plant, heating centre, year of manufacture 2021. Seldom used. Njdeywzvujpfx Ai Tswn

Year of construction: 2020, condition: ready for operation (used), Metal Band Saw manufactured in 2020. This MEBA MEBASwing 320 DG features a robust design suitable for various cutting applications. It operates at a voltage of 400 V and a frequency of 50 Hz, ensuring reliable performance. If you are looking to get high-quality cutting capabilities, consider the MEBA MEBASwing 320 DG machine we have for sale. Contact us for further details. Njdpez Nhyyjfx Ai Tswn - Current: 16 A- Voltage: 400 V- Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, cutting height (max.): 335 mm, cutting width (max.): 500 mm, saw band length: 4,400 mm, saw band speed: 2,500 mm/s, saw band width: 34 mm, TECHNICAL DETAILS Saw blade length: 4,400 x 34 x 1.1 mm Blade speed: 15 - 150 m/min Cutting capacity at 90° (round): 335 mm Cutting capacity at 90° (square): 500 x 335 mm Working height: 750 mm MACHINE DETAILS Motor power: 3 kW Nedpszaprnjfx Ai Tswn Machine weight: approx. 1,020 kg Dimensions: 2,150 x 1,200 x 1,900 mm Control: conventional

Condition: ready for operation (used), Year of construction: 1981, Round cutting area: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Blade speeds: 150, 355, and 95 m/min Saw drive: 380 V, 0.75 kW Space required: 1400 x 600 x 800 mm Nwjdpewuryrsfx Ai Tsn Weight: 340 kg

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: 1. Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 Nwjdpfx Asy Uvhtji Ten 3. For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Nodjtu U Ebopfx Ai Tjwn

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Design: ZM-LN Nedpfx Aezdku Roi Town Year of manufacture: 2011 Output: 125-900 kW

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. Nwsdpfx Aj Af E Dmji Tjn This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Parameters: Cutting diameter: 330 mm Cutting range (90° flat): 350 x 330 mm Saw band length: 4900×34×1.1 mm Cutting speed: 15–150 m/min (adjustable) Max. workpiece weight: 670 kg/m Total power requirement: 3.9 kW Table height: 750 mm Machine weight approx.: 2,600 kg Required space approx.: 1,700×2,400×2,200 mm Equipment: Laser line for cutting indication/marking Cutting process control Material monitoring Material database Feed force adjustment Zero stop Nwedpjx H Rynefx Ai Ten Job menu Bundle cutting clamp Vertical roller Double-sided opening / reduced end scrap Operation and Comfort: Swiveling control panel LED work lighting Receiving table Water spray gun Chip and Coolant Management: Screw chip conveyor Micro-dosing Coolant level and flow control

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play. Nodpfswf Hm Iex Ai Tswn

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m Njdpfeulnb Dox Ai Tswn 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Nodpfxeylm Tys Ai Tjwn

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of Njdpjzrmk Refx Ai Tewn hydraulic lifting of the saw frame.

Condition: new, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) Nedpewa Ui Tsfx Ai Town - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm Nwodpfoz Hbgajx Ai Ten - Scrap length, manual: 10 mm - Cutting pressure: infinitely variable / electric - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm - Machine weight: approx. 1,100 kg Accessories: ----- - 5x saw band, new

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. Nwjdpfx Aiez Dkzuj Ton oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions

Condition: used, Year of construction: 2008, functionality: fully functional, MEBAeco 335 A Bandsaw Machine Technical Specifications Type: Straight cut 90° Sawing process: NC automatic Automation: Automatic series cutting Cutting range: Round material at 90°: Ø 335 mm Flat material at 90°: 500 × 335 mm Nwedpfxjzdlx Ds Ai Ton Drive power: 3 kW Saw blade: 4400 × 34 × 1.1 mm Maximum load weight: 250 kg/m Year of manufacture: 2008 MEBAeco 335 A bandsaw machine, year of manufacture 2008, for automatic series cutting. Cutting capacity up to Ø 335 mm or 500 × 335 mm. Equipped with NC control, 3 kW drive, and saw blade 4400 × 34 × 1.1 mm. Maximum material load 250 kg/m.