Used Mg Hydraulic Four-Roll Bending Machine for sale (76,415)

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Bjdpfsza D U Dex Af Rjlh

Condition: good (used), Technical specifications: Bjdpfxjwkaalj Af Rolh Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Bledpfx Ajyzc Iaef Reh Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bsdpfxjytr Rmj Af Rolh Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Technical Data: Bjdpfxsx Dtt Ao Af Rjlh Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Bledpfxeyg Eulo Af Roh Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2016, Four-roll hydraulic CNC sheet metal bending machine. The machine is designed for bending sheet metal and manufacturing cylindrical or conical parts. Thanks to its four-roll design, it enables precise pre-bending and bending in a single working cycle. Suitable for mechanical engineering production, steel structures, tanks, pipe components, and other heavy-duty sheet metal applications. Technical specifications: Manufacturer: Durma / Durmazlar Model: HRB-4 2535 Year of manufacture: 2016 Type: Four-roll hydraulic sheet metal bending machine with CNC control Max. sheet thickness: 35 mm Working width: approx. 2,560 mm Machine length: 5,010 mm Machine width: 2,060 mm Machine height: 2,050 mm Machine weight: 20,300 kg Motor power: 37.4 kW Voltage: 400 V / 50 Hz Serial number: 683316002 Equipment and accessories: CNC control Hydraulic roll adjustment Side support Top support Blsdpfxey Sz Erj Af Reh Feeding table / supporting roller guide Documentation / operating manual The machine is connected and can be tested by arrangement.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Bjdpfszbcwmox Af Rjlh Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Bjdpfxov Htnie Af Rjlh Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 2050x200 2 speeds Bsdsh Ar Dujpfx Af Rslh Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Useful length : 2050 mm Top roll diameter : 200 mm Side roll diameter : 180 mm Motors total power : 5,5 KW Working speed : 3m/min. - 6m/min. Weight : 3750 kg Dimensions (mm) : 3850 x 1350 x 1290 (L x W x H) Performance data bending 10 mm at smallest inner diameter of 1000mm ( 5 x top roller ) 8 mm at smallest inner diameter of 300mm (1.5 x top roller) Performance data bending 8 mm at smallest inner diameter of 1000 mm (5 x top roller) 6 mm at smallest inner diameter of 300 mm (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Year of construction: 2002, condition: excellent (used), Technical data: working width: 3550 mm max. bending capacity: 42,0 mm Bedpsittzfjfx Af Rslh max. bending: 35,0 mm CNC control diameter upper roller: 480 mm diameter 2nd top roller: 540 mm diameter lateral side rollers: 480 mm diameter middle bottom roller: 480 mm conical bending device by inclination of the two side rollers mobile control panel with digital display hydraulic folding bearings own weight: approx. 44 tons additional equipment: lateral bending aid swiveling bending aid on top additional top roller The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Blsdpfx Afod Eqg Hj Reh Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: excellent (used), Year of construction: 2012, Technical Data: Bsdpfox Ii Hvex Af Rolh Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 12/09742, working width: 3,000 mm, bale length: 3,050 mm, roller (bottom) diameter: 400 mm, roller (top) diameter: 405 mm, sheet thickness (max.): 30 mm, TECHNICAL DETAILS Sheet width: 3,000 mm Upper roll working length: 3,050 mm Lower roll working length: 3,050 mm Side rolls working length: 3,100 mm Upper roll diameter: 405 mm Lower roll diameter: 400 mm Side rolls diameter: 320 mm Plate thickness for bending: max. 30.8 mm Plate pre-bending: max. 20 mm Distance between upper and lower roll: 70 mm Blodpfx Afjw Eh Hvs Rsh MACHINE DETAILS Total power requirement: 45 kW Electrical connection: 220/380 V Roll drives: 2 units FURTHER DETAILS Tilting of upper roll from operator panel Opening of swing bearing from operator panel Overload protection for conical bending device

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bsdpfjw Slctjx Af Rjlh Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Bodonvfc Ejpfx Af Rslh

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Bsdpfx Ajnvfdbof Rolh

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm. Bsdjnvfdfopfx Af Relh

Year of construction: 1984, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. Blodenvfctjpfx Af Reh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. Bedjy Uiyvjpfx Af Relh The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, functionality: fully functional, control type: manual, 3-Roll Round Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Type: PV 7 H Serial Number: 804, overhauled in 1987 The machine has a very robust design and was only used for single-layer bending. Max. bending length: 2500 mm Bledjzba Atjpfx Af Roh Max. sheet thickness: 16 mm Taper bending device Upper roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a platform can be purchased for use around the machine.

Condition: good (used), functionality: fully functional, 3-Roll Bending Machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Working area: 2000 x 6 mm Blodpfxeza Sxde Af Reh Hydraulic tilting support for workpiece change Control panel Bdsbmm Aveyw S E He Euoc Emergency stop via cable pull Condition: good / ready for immediate use

Condition: excellent (used), Year of construction: 2014, sheet width 2050 mm plate thickness 6.0 mm ST pre-bending 5.0 mm ST diameter of upper rolls 170 mm side roll diameter 165 mm diameter of lower rolls 135 mm Control SIEMENS oil volume 80.0 Liter voltage 380 V total power requirement 7,5 kW weight 3450 kg Dimensions (only the machine) 3750 x 1170 x 1000 mm very good condition (!!) current new price incl. accessories approx. 70.000 Euro special price on request Bljdpfjy Uy R Sjx Af Rsh The FACCIN 4HEL model series is regarded in the industry as one of the most most precise, reliable and productive electronic 4-roll round bending 4-roll round bending machines worldwide. It has been specially designed for high throughput rates and maximum accuracy for medium to heavy sheet thicknesses. Features: - robust electro-hydraulic 4-roll round bending machine * with linear guidance of the rolls * the side rollers move on a straight, diagonal axis . up and down * extremely short distances between the rollers, . which increases the bending quality - 4-roll concept offers a wide range of bending and rounding options - Freely movable control unit * SIEMENS numerical control with touchscreen * Control of all rollers and machine axes * Digital position display of the side rollers * Manual operation possible via electric buttons - Infinitely variable adjustment of the bending speed - top roller and bottom roller with hydraulic motors and planetary gears * active rotary movement = side rollers run freely with - Conical rolling possible by tilting the rollers * Reduction of the maximum material thickness by approx. 50-60 % . during conical bending - Electronic roller parallelism (EPS) - Bending on both sides - diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - safety device (safety line with switch unit) - Manual central lubrication - operating instructions incl. circuit diagram CE explanation

Condition: used, functionality: fully functional, Professional pipe bending machine with hydraulic drive. Suitable for steel pipes, stainless steel, and possibly thick-walled copper pipes. INCLUDES a wooden crate with a comprehensive set of bending dies/bending segments (see photo) – this is what gives it its real value, as bending segments are very expensive when purchased new. Ideal for heating engineers, plumbing companies, steel pipe construction, plant engineering, and training workshops. With the included set, various diameters can be bent directly. Technical data: - Type: hydraulic pipe bending machine, stationary unit - Drive: three-phase 400 V / hydraulic unit - Bending dies: comprehensive set available (wooden crate, see photo) - Construction: steel frame, mobile/stationary - Application area: typically pipe OD 20-60 mm (verify on-site) - Year of manufacture: approx. 1980s-1990s Bljdpfxjzab Ems Af Rsh Collection/transport: Self-collection with a forklift. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: excellent (used), Year of construction: 2022, sheet width 2050 mm plate thickness 4.5 mm ST pre-bending capacity 4.0 mm ST roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm Bsdey Umc Ijpfx Af Relh weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Current new price: approx. 13.000 Euro good condition (!!) Special price upon request Features: - Robust electromechanical plate rolling machine - 2 centrally driven rollers (top and bottom rollers) powered by an electric motor - Manually swiveling top roller with hinged bearing - Includes conical bending device - Freestanding control panel - Manually adjustable bottom roller (via handwheel) - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety line with switch unit) - CE marking / Declaration of Conformity Special equipment included in the price: - Hardened rollers - Motorized adjustment of side rollers - Digital position display for the motorized side roller