Used Microcut Challenger Machining Center - Universal for sale (69,223)

Condition: used, operating hours: 22,802 h, functionality: unexamined, machine/vehicle number: 71401454, controller model: MillPlus, MACHINE DETAILS Control: MillPlus Electrical data Voltage: 400 V Frequency: 50 Hz Lodpfjyx U Nqox Akyehf Operating hours Operating hours: 37,732 h Spindle hours: 22,802 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) Ledpfoyzyttsx Akyshf - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Lodpfx Aksy Dgyfoyehf Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random Lhjdjyf Ncqepfx Akyof ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: ready for operation (used), maximum spindle speed 6000 rpm for Deckel FP Lodpfoy D T Hxex Akyshf

Condition: good (used), Year of construction: 2018, functionality: fully functional, Technical details x-travel 540 mm y-travel 635 mm z-travel 400 mm weight of the machine ca. 10,2 t dimensions of the machine ca. 2,9 x 2,9 x 3,1 m Additional information Röders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center Machine hours: 1294 (5. March 2026) General Machine Data Manufacturer: Röders TEC GmbH (Germany) Machine Type: 5-Axis CNC Milling and Grinding Center Model: RXP 601 DSH Design: Vertical High-Speed Machine Axis System: X / Y / Z + A / C Drive System: Direct drives in all linear and rotary axes Measuring Systems: Optical direct measuring systems in all axes Thermal Management: Active temperature stabilization of all main components Workspace & Mechanics X-axis travel: 540 mm Y-axis travel: 635 mm Z-axis travel: 400 mm A-axis swivel range: ±115° C-axis continuous rotation (360°) Max. workpiece weight: up to 200 kg Machine weight: approx. 10200 kg Space requirement (L×W×H): approx. 2950 × 2950 × 3100 mm Spindle system Spindle manufacturer: Levicron Ledpfx Ajy Emwtskyshf Spindle type: High-precision air-bearing milling and grinding spindle Bearing: Air bearing, operating pressure up to 10 bar Tool holder: HSK 25 (HSK-E depending on the version) Application: High-speed milling and precision grinding Thermal properties: Virtually frictionless, minimal heat input Grinding equipment: • Integrated grinding function in the CNC control • Optimized axis control for grinding processes • Vacuum Z-axis compensation to relieve stress on the Z-axis • Thermally stabilized Z-axis for maximum dimensional accuracy • Suitable for coordinate, profile, and fine grinding Peripheral systems: Extraction: Industrial extraction system for milling and grinding operations Oil treatment: Filter and treatment system for Grinding oil Cooling lubricant Temperature control Chip disposal Oil-based grinding medium Active media temperature control Integrated screw conveyors All information provided to the best of our knowledge, subject to technical modifications.

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Centre 5-Axis Simultaneous Lsdpfx Akjy D Nfdsyjhf Type DMU 80 P Year 1998 Heidenhain CNC With Tooling

Condition: ready for operation (used), Year of construction: 2003, Immediately available ex works: 5-axis (3 plus 2) machining centre Deckel Maho Type DMU 35 M Year of manufacture: 2003 Siemens 810 D control Electronic handwheel Universal tilting/rotary table 400 x 290 mm Travel X/Y/Z: 350/240/340 mm Spindle taper SK 40 Spindle speeds: 20 – 6300 rpm Drive: 6.3/10 kW Table load: 100 kg Rotation range: 360 degrees Lhodpjy Enuaefx Akyof Swivel range: plus 105 / minus 15 degrees Distance spindle nose – table: 145/485 mm Feed rates up to 3000 mm/min Weight: 1750 kg Price: Euro 4,500.—plus VAT ex location

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Table size: 700 x 500 mm Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Lhodpfx Akoy Emkgjyof Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: used, Year of construction: 1994, x-travel 1600 y-travel 1300 mm z-travel 1450 mm Lhjdpfx Aoyqvv Uekyef Control Siemens 840C Tool changer 100 Pos number of spindle speeds 10-4000U/min tool taper Iso50 A-axis -100°/+10° c-axis 360.000° 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2023, operating hours: 1,285 h, QUASER UX_500 C 23.12.2025 Year of manufacture: 2022, Commissioned: 2023, Like-new, flawless condition, Only 1,285 production hours Standard Specification: - Siemens 828 D PPU29 control with 15" touchscreen - Adjustable operator panel (tiltable and rotatable) - Heat exchanger for climate-controlled electrical cabinet - Tool system: SK40_BigPlus, suitable for holders with/without face contact according to DIN 69871 - Pull studs according to DIN 69872 - Portable electronic handwheel - Double-arm tool changer with 30 stations - Pneumatically actuated tool change door - Direct position measuring system on rotary axis - Direct position measuring system on tilting axis - Infrared receiver for workpiece and tool measurement - Three-color signal beacon - Coolant spray gun - External air blast for dry machining - Automatic central lubrication for ball screws - Computer-optimized, heavy machine base from heavily ribbed cast iron - Sturdy and rigid portal-type machine design - Chip disposal consisting of work area chip flushing system with Grundfos pump (75 L/min at 3 bar) - Chip channels made of stainless steel - Two auger conveyors in the work area - Full work area protection with two corner view windows and two work lights - Flood coolant with 4 ring nozzles at spindle nose, Grundfos pump (75 L/min at 3 bar) - Machine color: RAL 7035 light grey - Coolant tank, spindle headstock, and doors painted RAL 9005 deep black Existing Siemens options: Ljdoy D T H Eopfx Akyshf - SW option: Kinematic measurement cycle 996 for Siemens 828 D - Cycle for measuring the center point of rotary and tilting axes - SW option: In-process measuring cycles for Siemens 828 D - Measurement cycles for automatic workpiece inspection/measurement - Workpiece zero-point probing with infrared 3D probe - Operating manual UX500 Siemens 828 D - SW option 3D simulation - Network drive management Further details, including video, available upon request by email.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Lhedpfex Hn A Tox Akyof Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis Ledpfx Ajy Ed Ehokyshf

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Year of manufacture: 2023 Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Lhodpjy Em Urofx Akyef Control: Siemens 840D sl X travel: 500 mm Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 Lhsdpfx Ajxuqn Sekyof TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Lodpfxeyaa Sfo Akyehf Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: new, Year of construction: 2024, operating hours: 25 h, SPINNER VC850 high-performance machining center Travels X850, Y510, Z510 mm in "Advanced" version with patented guide cover concept High-precision MILLING SPINDLE up to 12,000 rpm / 15.2KW / 97Nm (max) as in-line spindle with direct drive without belt Tool holder on spindle SK40 DIN69871 TOOL MAGAZINE with 32 tool stations MAGAZINE CLAP pneumatic in the working area DIRECT MEASURING SYSTEMS in X/Y/Z axis CONTROL FANUC 0i-F Plus with the following basic functions: - Contouring control with Fanuc iHMI user interface - Fanuc 15" LCD touch screen, - User memory 2MB, max. 1000 program numbers - USB interface for NC program data exchange, Ethernet interface - max. 4 axes can be interpolated simultaneously - 6+48 workpiece coordinate systems available - 400 tool compensation pairs, with tool life monitoring - with G-code & M-code guidance functions - Comprehensive Fanuc cycle package "Milling" as standard, as G-code and under MGi - e.g. tapping without compensating chuck, thread cutting and engraving. Helical and cylindrical interpolation functions - with scaling, mirroring and coordinate system rotation functions - Parallel programming in the background - Runtime and piece counter Lodpfek Raywsx Akyjhf - Inch-metric changeover - Electronic handwheel as standard - Dialog language for control trilingual German/English/French UNIVERSAL CHIP CONVEYOR VC850 exiting the machine to the RIGHT PREPARING THE SPINDLE FOR HIGH PRESSURE to use the additional tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper belt filter for flushing centrally through the spindle PREPARATION SPINNER-STANDARDMESSTASTER Blum Cordless SPINDELTASTER Spinner-Blum with tool holder suitable for the milling spindle ADDITIONAL HOOD on top for closed working area, required for high-pressure rinsing or highly atomizing processes or extraction STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals supplied in digital form on the control unit. Paper manuals for an additional charge RING EYES for crane unloading, set consisting of 4 pcs. absolutely necessary for crane transportation STANDARD PAINTING two-colored in light grey RAL7035 and blue grey RAL5008 Electrical version EUROPA-STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN mains (5-wire) Remarks: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparison machines The accessories shown, such as clamping devices or tool holders, are only included in the scope of delivery to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. GGF we have other offers of comparable machines. Subject to prior sale.

Condition: used, Year of construction: 2004, Technical details: Ljdpfxsy D Tvmj Akyohf x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 30000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, spindle chiller, no internal coolant supply, approx. 124.200 hours "machine on", approx. 60.600 hours "spindle on" in total *

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm Lhodpfxjy Ez Ele Akyjf y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, CNC machining center Kunzmann WF 7/3 Control: Heidenhain TNC 124 Year of manufacture: 2010 Internal machine no. 53 Machine from training workshop / as-new condition Lsdpfjy A Hrfjx Akyshf Travel paths: X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table: 800 x 425 mm Mounting: SK 40 Accessories: - Vice - Tools

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm Ledpfx Aoy A Tdnokyohf z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Lhedpfjyq H Arox Akyef Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

Condition: used, Year of construction: 2007, B-axis swival range +/- -90° / +12 ° C-axis 360 ° control HEIDENHAIN - Millplus number of spindle speeds 12.000 U/min numbers of positions in the tool changer 60 tool taper SK40 NC rotary table diameter 600 mm fixed clamping table 1.000 x 600 mm max. table load 500 kg 5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (40bar), a 60-way tool changer, NC - rotary table, Renishaw measuring probe and chip conveyor. Ljdpey A Tbyefx Akyehf Additional equipment information: - NC swivelling head B-axis - NC rotary table C-axis integrated in the fixed table - Direct position measuring system in X/Y/Z (glass scales) - Extraction system - 3D Quickset - Handwheel HR 410 The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU60monoBlock | DMU60 monoBlock | DMU60 | 60 monoBlock

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, total width: 400 mm, table length: 450 mm, The machine is in good technical condition, equipped with a Heidenhain i530 control system and a probe. Lodpsy E Iuyjfx Akyshf

Condition: used, Year of construction: 2015, operating hours: 10,700 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 48 kVA, controller model: Heidenhain TNC 640, table width: 800 mm, table length: 650 mm, rotary table diameter: 650 mm, overall weight: 11,600 kg, spindle speed (max.): 20,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used DMG MORI DMU 75 monoBLOCK universal machining center, year of manufacture 2015. Machine type: DMU 75 monoBLOCK Serial number: 12430004943 Year of manufacture: 2015 Maximum spindle speed: 20,000 rpm Weight: 11,600 kg Phases: L1, L2, L3, N, PE Connected load: 48 kVA Maximum operating current: 70 A Fuse protection: 80 A Short-circuit current: 0.80 kA Motor voltage: 440 ±10 V Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage AC: 230 V Auxiliary voltage DC: 24 V Internal coolant supply: 40 bar Tool holder: SK40 Operating hours: CNC on: 33,043 h Machine on: 30,184 h Program run: 13,471 h Operating time: 10,700 h If you have any questions or need further information, please do not hesitate to contact us. The machine is located in Osterode/Harz and can be inspected by appointment. Lhodpfx Asy Dq Hpskyef This is a used machine and therefore sold with exclusion of any warranty.