Used Mining Winches for sale (1,622)

Condition: ready for operation (used), Year of construction: 2000, Two used mining winches are offered in very good condition, fully functional. 1. Hydraulic winch type 5101 Defries, serial no. 11617105, pulling force 20 kN, year 1985 (conversion 2010), weight 1,200 kg 2. Planeta, type SB306-E-SP, serial no. 2002968, pulling force 50 kN, year 2000, weight: 1,128 kg (cabinet 164 kg). Nedpfx Aeyznciogrowl

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. Nwjdpfsz Dxcmsx Agrsl 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Year of construction: 2019, condition: used, functionality: unexamined, Montanari Traction Winch for Elevator (Gearbox & Motor) - Year 2019 Nedoy U I R Hopfx Agrewl Selling a used elevator traction unit from the Italian brand Montanari Giulio & C. Composition of the unit: 1. Speed Reducer (Winch) o Model: M93 B9/1 o Reduction ratio: 1/39 o Serial number: 496692 o Year of manufacture: 2019 o Lubrication: Uses synthetic oil. o Equipped with a large 5-groove traction sheave 2. Electric Motor o Brand: Montanari o Type: MPV160L.40 (Three-phase asynchronous motor) o Power: 13 / 13.25 kW o Frequency: 50 Hz o Speed: 1380 / 315 rpm o Voltage: 230 / 400 V o Insulation class: F 3. Electromagnetic Brake o Model: EM500 o Voltage: 48V D.C. o Current: 2.7 A o Connection type: Parallel connection. o Equipped with a red manual release lever Key Features: • Leading brand in the elevator industry. • Recent year of manufacture (2019). • Complete unit, ready for installation. • Traction sheave in excellent condition. The equipment is sold as is. Price: €2000 For more information or to arrange a visit, please contact me by message or WhatsApp.

Condition: good (used), Year of construction: 1969, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: SWF, crane chassis with electric cable winch -Cable pull: Type 50H8d -Load capacity: 10,000 kg Nodpfxeyvum Ro Agrewl -Drive system: S0.85-4 -Roller spacing: mm, dimensions see photos Quantity: 1 piece available -Transport dimensions: 1250/1960/H820 mm -Weight: 1320 kg

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Nedez Aibaspfx Agrswl Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: excellent (used), Year of construction: 2013, For sale: Complete overhead travelling crane with an electric chain hoist from the renowned brand Stahl, with a lifting capacity of 1000 kg. Year of manufacture: 2013. The set is fully operational and ready for further use. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – robust and reliable unit Nwsdpfxewcrazo Agrjl * Drive type: electric, chain * Total crane length: 1046 cm (10.46 m) * Stable main girder + cable and power guides * Inspection possible on site – previously operated in a clean production hall The crane is in very good technical condition – well maintained and ready to use. Ideal for workshops, industrial plants, warehouses, metalworking shops, or tool rooms.

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components • Control cabinets IP55 according to plan • Open steel rack constructions Nedpfx Aozt Sw Sjgrowl • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Condition: used, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, gearing type: mechanical, suspension: steel-air, Year of construction: 1992, Mercedes 817L Tow Truck. Year of manufacture: 1992. 165,000 km! Engine: 6-cylinder turbo. Gearbox: 6-speed with high and low range. Hydraulic sliding platform. Hydraulic winch. Hydraulic hoist. The vehicle has German registration documents; no valid MOT/TÜV! Runs well. Nsdjz E S Huepfx Agrjwl Video, photos, and further information also available via WhatsApp! Price net + 21% VAT or net export with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: new, power: 349 kW (474.51 HP), tire size: 13R22.5, axle configuration: 6x6, wheelbase: 3,800 mm, fuel tank capacity: 390 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2026, - 1 fuel tank IVECO T-WAY AT720T47WT H 6x6 Tractor | 470 CV | EURO III | 33T GVW The IVECO T-Way AT720T47WT H 6x6 Tractor is for sale and provides a heavy-duty all-wheel-drive platform for demanding transport, construction, infrastructure, industrial and remote-site operations. Powered by the C13 diesel engine producing 470 CV, this IVECO T-Way combines strong engine performance with a genuine three-axle 6x6 drivetrain and a professional tractor configuration. The vehicle is equipped with the 16TX 2240 TO transmission, mechanical suspension, a 3,800 mm wheelbase and a gross vehicle weight of 33,000 kg. Its 6x6 axle configuration makes the IVECO T-Way particularly relevant for transport operations where conventional road driving is combined with gravel roads, unpaved access routes, construction sites, industrial areas and other demanding working environments. A JOST fifth wheel, 3½" fifth-wheel configuration, 16 mm mounting plate and 15-pin trailer connection prepare the truck for professional semi-trailer operation. The Active Time cab provides a practical working environment with an air-suspended driver's seat, manual air conditioning, cruise control, Hill Holder, one bunk, external sun visor and Bluetooth DAB radio. For international operators searching for an IVECO T-Way 6x6 for sale, EURO III heavy-duty tractor, 6x6 off-road tractor or professional truck tractor for demanding transport, this configuration provides a strong combination of traction, mechanical durability and commercial transport capability. QUICK HIGHLIGHTS Key specifications of the IVECO T-Way AT720T47WT H 6x6 EURO III Tractor. - IVECO T-Way AT720T47WT H - SGT6 - Heavy-Duty Tractor Unit - Genuine 6x6 All-Wheel Drive - C13 Diesel Engine - 470 CV - EURO III Emission Standard - 33,000 kg Gross Vehicle Weight - 16TX 2240 TO Transmission - 3,800 mm Wheelbase - HR-TP Rear Axle - Rear Axle Ratio 4.67 - Mechanical Suspension - Front Parabolic Suspension - Rear Multileaf Suspension - 13R22.5 Tyres - Twin Rear Wheels - Drum Brakes Front & Rear - EBS + BAS - JOST Fifth Wheel - 3½" Fifth Wheel - 16 mm Fifth-Wheel Mounting Plate - 390-Litre Fuel Tank - Steel Front Bumper - Radiator Guard - Horizontal Air Filter - Active Time Cab - Low Roof - Air-Suspended Driver's Seat - Manual Air Conditioning - Cruise Control - Hill Holder - 1 Bunk - External Sun Visor - Bluetooth DAB Radio - Left-Hand Drive - 15-Pin Trailer Plug - 85 km/h Speed Limiter - Without Urea Tank - Worldwide Export Available HEAVY-DUTY IVECO T-WAY 6x6 TRACTOR Nodpfx Aszp Nwusgrswl A professional 6x6 tractor must combine road transport capability with additional traction when operating conditions become more difficult. The IVECO T-Way AT720T47WT H is configured as a three-axle 6x6 tractor, giving the vehicle all-wheel-drive capability across all three axles. This drivetrain configuration provides an important advantage for operators whose routes do not remain exclusively on paved roads. Construction projects, infrastructure developments, mining sites, energy projects and industrial operations may require a tractor to leave the main road and continue across gravel, loose surfaces or unpaved access routes. A conventional road tractor can be highly...

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 340 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 1,200 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A young Liebherr LC 1203 from the current LC generation: built in 2009, with a motor-driven milling spindle, capable of machining workpieces up to 1200 mm in diameter and weighing 9.5 t, module 20 – the machine for large gear cutting in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in their well-maintained original condition with original paint – a Liebherr from 2009 does not need a complete overhaul, but a control system that will last for the next 20 years. Delivery time: six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from one tooth – therefore also worms and special profiles. With an axial travel of 1000 mm between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor-driven milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long tool life. Nwedpfez E Hx Ssx Agrsl Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 t (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 t. Scope of supply: new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry check according to DIN can be offered additionally upon request.

Condition: used, functionality: fully functional, machine/vehicle number: YV2XS50G6GB787706, mileage: 82,358 km, power: 382.46 kW (520.00 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 23,000 kg, maximum load weight: 40,000 kg, overall weight: 63,000 kg, tire size: 650/65 R25, tire condition: 20 %, wheelbase: 5,900 mm, fuel: diesel, fuel tank capacity: 405 l, emission class: euro3, number of seats: 2, total length: 10,900 mm, total width: 2,900 mm, total height: 4,080 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,400 kg, loading space volume: 33.3 m³, loading space length: 6,700 mm, loading space width: 2,600 mm, loading space height: 1,960 mm, Year of construction: 2018, operating hours: 9,861 h, We are offering this used Volvo FMX 520 Push truck, manufactured in 2018. We have 3 of the same model in stock. If you have any questions or would like more information, please feel free to send us a message or call us. Nwedpsy Uhyusfx Agrsl

Condition: used, functionality: fully functional, machine/vehicle number: YV2XS50G8KB882504, mileage: 95,085 km, power: 382.46 kW (520.00 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 23,000 kg, maximum load weight: 40,000 kg, overall weight: 63,000 kg, tire size: 650/65 R25, tire condition: 20 %, wheelbase: 5,900 mm, fuel: diesel, fuel tank capacity: 405 l, emission class: euro3, number of seats: 2, total length: 10,900 mm, total width: 2,900 mm, total height: 4,080 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,400 kg, loading space volume: 33.3 m³, loading space length: 6,700 mm, loading space width: 2,600 mm, loading space height: 1,960 mm, Year of construction: 2018, operating hours: 10,072 h, We are offering this used Volvo FMX 520 Push truck, manufactured in 2018. Nwedpfjy Ui Dhex Agrjl We have 3 of the same model in stock. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 5,700 mm, total width: 2,450 mm, total height: 2,200 mm, Year of construction: 2025, Equipment: air conditioning, crane, differential lock, electric window regulation, power assisted steering, - Autoradio - CD - Diesel - Power windows front - PTO - Side door - Tool box - Transportation WHEN THE EQUIPMENT CANNOT COME TO THE WORKSHOP, BRING THE WORKSHOP TO THE EQUIPMENT Downtime costs money. And when machinery is operating on a remote construction site, inside a mine or hundreds of kilometres from the nearest workshop, even routine maintenance can become a logistical operation. That is exactly where the Mercedes-Benz Atego 1725A 4x4 Mobile Workshop Truck comes into its own. It combines the mobility of a Mercedes-Benz 4x4 chassis with lubrication equipment, fluid storage, compressed air, cleaning equipment, independent electrical power, welding equipment and professional workshop tools. One vehicle engineered to bring essential maintenance capability directly to the fleet. WHY CHOOSE THIS ATEGO 1725A MOBILE WORKSHOP? ✔ Mercedes-Benz Atego 1725A 4x4 ✔ 245 HP EURO 3 Engine ✔ Front & Rear Differential Locks ✔ Manual Mercedes-Benz Drivetrain ✔ Factory PTO ✔ Complete Mobile Workshop Body ✔ Four Pneumatic Oil Systems ✔ Waste-Oil Collection System ✔ Grease Dispensing System ✔ 1,000-Litre Diesel Service Tank ✔ 900-Litre Waste-Oil Tank ✔ 600-Litre Water Tank ✔ High-Pressure Cleaner ✔ Integrated Air Compressor ✔ Independent Power Generator ✔ MMA & TIG Welding Equipment ✔ Professional Workshop Tools ✔ Workbench & Storage Cabinets ✔ 4x4 Mobility for Remote Projects ✔ Ready for Worldwide Export 4x4 Mobility – Because Maintenance Does Not Always Happen on the Road The machines that need servicing are not always parked next to a workshop. Excavators, loaders, trucks, generators and construction equipment may be working on unpaved roads, remote project sites or industrial locations where conventional service vehicles struggle to reach them. The Mercedes-Benz Atego 1725A combines 4x4 drive with differential locks on both the front and rear axle. Its 245 HP Mercedes-Benz six-cylinder diesel engine delivers the power, while the G 85-6 manual transmission and VG550 transfer case provide the drivetrain configuration required for demanding field operations. The mobile workshop starts with the ability to get to the job. A Lubrication Station on Wheels Routine lubrication is one of the foundations of preventive maintenance. This mobile workshop carries four pneumatic oil pumps, each equipped with a hose reel, dispenser gun and digital meter. Different lubricants can therefore be carried and dispensed from dedicated systems without continually changing equipment. Nwjdpfey Ruczsx Agrjl A separate pneumatic grease pump with a 12-metre hose reel supports greasing operations, while a dedicated waste-oil pump and collection system allow used fluids to be removed during servicing. The workshop also incorporates a 900-litre waste-oil tank. Everything required to support regular fleet lubrication from one mobile platform. 1,000 Litres of Mobile Diesel Support Remote equipment also needs fuel. The integrated 1,000-litre diesel tank is equipped with its own 24V pump, 15-metre hose reel, dispenser gun and digital flow meter. This allows the mobile workshop to provide fuel support to equipment in the field while carrying out maintenance activities. For fleets operating across large sites or remote projects, combining maintenance and...

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Magni Winch / W 6 I / 6 tonnes / suitable for RTH, TH & HTH 10.10 series / NEW Price: €11,990.00 net / €14,268.10 gross - Max. lifting capacity: 6,000 kg - Working cable length: 27 m - Cable diameter: 12 mm - Cable lowering speed: 19 m/min - Automatic attachment recognition: yes - Winch with homologated, swiveling load hook - Pressure roller and hydraulic end-stop for cable winding/unwinding - Includes metal transport frame This attachment is suitable for the RTH, HTH 10.10, and TH series. Product code: ATT-02-004 We have many other Magni attachments in stock and immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are pleased to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. Njdeykht Eepfx Agrewl We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! = More information = New: Yes Application: Construction Please contact Marius Herden for further details.

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Njdpfx Agslhqdmsrowl Available immediately

Condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. Magni Jib with Winch JW2000 / 2 Tonnes / Suitable for RTH & TH Series / NEW Price: €9,490.00 net / €11,293.10 gross - Max. lifting capacity: 2,000 kg - Length: 2,390 mm - Cable diameter: 10 mm - Working cable length: 25,000 mm - Cable lowering speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom jib with integrated winch - Lattice boom construction made of tubular sections for optimal weight/performance ratio - Winch with pressure roller and hydraulic end-of-travel switch for safe cable winding/unwinding This attachment is suitable for RTH and TH series. Product code: ATT-04-015 We have many more Magni attachments in stock for immediate delivery! Mr. Herden (phone) will be pleased to assist you. We are happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Njdpfx Ageykht Serswl Errors and prior sale excepted! = More information = New: Yes Application: Construction Contact Marius Herden for further information.

Year of construction: 2008, condition: used, machine/vehicle number: 0705012, load capacity 10,000 kg rope diameter 22 mm x 150 metres length according to information included in the documentation operating pressure 55 bar up to 80 bar maximum flow volume 19 litres / minute up to 272 litres / minute maximum hydraulic motor Rexroth hydraulic control block with mounting underframe documentation and inspection log book available The rope winch has been used on a test stand / test tower. space requirements length - 2,100 x depth - 1,400 x height - 1,300 mm complete with control block Nwedpfx Asiqhi Tjgrjl weight approx. 1,500 kg  

Condition: used, mileage: 140,315 km, power: 338 kW (459.55 HP), fuel type: diesel, tire size: 375/90R22.5, axle configuration: 10x4, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: other, total length: 10,100 mm, total width: 2,800 mm, total height: 3,900 mm, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, power assisted steering, traction control, = Additional Options and Accessories = - Electric power steering - Lift axle - Hub reduction - Radio - Reversing camera - Sun visor - Central lubrication system = Notes = Hub reduction. Steel suspension. Third axle on air suspension / liftable. Dynamic steering Tipper: Hardox steel 450 30 m3 Payload: 50,000 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Front axle 1: Tire size: 375/90R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Front axle 2: Tire size: 375/90R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Nsdpfszn Hhbjx Agrewl Mid axle: Tire size: 375/90R22.5; Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Air suspension Rear axle 1: Tire size: 12.00R24; Dual tires; Tire tread depth left inside: 15%; Tire tread depth left outside: 15%; Tire tread depth right inside: 15%; Tire tread depth right outside: 15%; Suspension: Leaf spring suspension Rear axle 2: Tire size: 12.00R24; Dual tires; Tire tread depth left inside: 15%; Tire tread depth left outside: 15%; Tire tread depth right inside: 15%; Tire tread depth right outside: 15%; Suspension: Leaf spring suspension Weights Unladen weight: 24,000 kg Payload: 50,000 kg GVW: 74,000 kg Financial Information Price: On request Identification Model number: FMX 460 10x4 TIPPER / MINING = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Year of construction: 2022, condition: used, General information New: Yes Field of application: Construction Drivetrain Make of engine: Magni Weights Njdsxf Eawepfx Agrewl Empty weight: 480 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Working pressure: 250 bar Cutting power: 250 kN Required hydraulic flow: 40 l/min Production country: IT Additional information Please contact Sales Department Collé Sittard for more information

Year of construction: 2022, condition: used, General information New: Yes Field of application: Construction Drivetrain Make of engine: Magni Weights Empty weight: 500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,1 Working pressure: 250 bar Cutting power: 250 kN Required hydraulic flow: 60 l/min Production country: IT Additional information Nwodpfjxg A Tkjx Agrjl Please contact Sales Department Collé Sittard for more information

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Nwodpfsz Agv Usx Agrel - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, mileage: 86,335 km, power: 118 kW (160.44 HP), first registration: 05/2021, fuel type: diesel, tire size: 225/65R16c, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, Year of construction: 2021, = Further Information = Front axle: Tyre size: 225/65R16C; Steered; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle: Twin tyres Unladen weight: 2,447 kg Payload: 1,053 kg Gross vehicle weight: 3,500 kg Damages: none Nodszgm Dtopfx Agrewl

Condition: excellent (used), Year of construction: 2016, Sell Aluminum Porta Gantry 250KG mobile gantry winch, 2016r in bdb condition. Nwedpfx Asvcdciegrjl

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Nsdsz Agw Eepfx Agrewl - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm Njdpfxsz Ag Rrj Agrowl - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.