Used Mla Semiautomatic Water Slot Milling Machine for sale (70,355)

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Tedjwqlmdopfx Ahmoc

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control Todpfx Asx D Tbmohmec YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping Tsdpfxjx R Sv So Ahmsc -Fine adjustment via spindles and handwheels

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Tjdpoxxb Rrjfx Ahmec Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Todpezuxn Tefx Ahmoc For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Todpfjthuzpex Ahmsc Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: excellent (used), Valentini Macchine TP/3 Overhead Spindle Moulder Spindle-to-arm distance: 800 mm Dual-speed spindle drive motor: 3.3/2.6 kW Todpswy Np Iefx Ahmoc Two spindle speeds: 9000/18000 RPM Spindle tilting angle adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Height-adjustable table Pneumatic spindle control via pedal

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM Tedpfoz Eh Egsx Ahmsc 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Tsdpsy Ni Ivofx Ahmjc Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, travel distance X-axis: 1,300 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 60 rpm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, rotational speed (min.): 60 rpm, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, space requirement width: 2,100 mm, space requirement length: 2,520 mm, space requirement height: 2,000 mm, warranty duration: 12 months, Equipment: documentation/manual, SALE - 5% OFF UNIVERSAL VERTICAL AND HORIZONTAL MILLING MACHINE This robust universal milling machine is equipped with vertical and horizontal ISO50 spindles. The complete vertical spindle head moves along the column guideways, while its adjustable angle enables machining in various positions. The machine is suitable for producing tools, fixtures, engine components and other precision parts. Automatic and rapid feeds on all three axes, servo drives and a digital readout ensure efficient, accurate and convenient operation. KEY FEATURES Vibration-damping cast-iron construction Vertical and horizontal ISO50 spindles Automatic feed on all three axes Rapid feed on all three axes Infinitely variable feed adjustment 10 Nm servo drives Digital readout (DRO) Large worktable with a 500 kg load capacity Hardened and ground gears for reduced operating noise Central lubrication system Adjustable vertical head angle Functional and intuitive control panel Protective guards compliant with current safety requirements Worktable guard available as optional equipment TECHNICAL SPECIFICATIONS Table size: 1600 x 360 mm Maximum table load: 500 kg Table swivel range: -45° to +45° X-axis travel: 1300 mm Y-axis travel: 320 mm Z-axis travel: 450 mm X-axis feed rate: 30-750 mm/min Y-axis feed rate: 20-500 mm/min Z-axis feed rate: 15-375 mm/min X-axis rapid feed: 1200 mm/min Y-axis rapid feed: 800 mm/min Z-axis rapid feed: 600 mm/min Number of T-slots: 3 T-slot width: 18 mm T-slot spacing: 80 mm Horizontal spindle taper: ISO50 Vertical spindle taper: ISO50 Upper ram travel: 550 mm Vertical spindle-to-table distance: 196-646 mm Horizontal spindle-to-table distance: 20-470 mm Vertical spindle speeds: 12 speeds, 60-1750 rpm Horizontal spindle speeds: 12 speeds, 60-1800 rpm Tjdpfxeyuculs Ahmec Vertical spindle motor: 4.0 kW Horizontal spindle motor: 5.5 kW X-axis feed motor: 1.5 kW Y-axis feed motor: 1.5 kW Z-axis feed motor: 1.5 kW Servo drive torque: 10 Nm Machine dimensions (L x W x H): 2520 x 2100 x 2000 mm Weight: 2800 kg TRANSPORT We can arrange delivery of the machine to the customer. Transport costs are calculated individually according to the delivery location and specific transport requirements. Please contact our sales department to receive a transport quotation.

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia Todpfx Aeb Tmngehmec CE side and rear safety guards with front light curtain.

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Clamping surface: Length: 8000 x Width 2100 mm Tsdpfx Ahezc Nt Dsmjc Plate thickness: 360 mm - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification • Model: ZX7045B VARIO • Max drilling capacity: 45 mm • Max face milling diameter: 80 mm • Max vertical milling diameter: 32 mm • Max tapping capacity: M12 • Spindle taper: MT4 • Spindle travel: 130 mm • Spindle speed: 100 – 3200 rpm • Speed control: variable • Max distance spindle–table: 450 mm • Distance spindle axis–column: 286 mm • Table travel X: 580 mm • Table travel Y: 200 mm • Table size: 800 × 240 mm • Head: tilting ±45° • Motor power: 2.2 kW • Power supply: 400 V Tjdpfx Ajyvh Hqjhmsc • Machine dimensions: 860 × 740 × 1200 mm • Weight: 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design Todpez Ekkxsfx Ahmoc The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each Tedpoxy Stysfx Ahmsc - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: excellent (used), functionality: fully functional, Minimax Router 600 Overhead Spindle Moulder Spindle to arm distance: 600 mm Two-speed spindle drive motor: 2.2/1.5 kW Tsdey Hhv Tjpfx Ahmsc Two spindle speeds: 9000/18000 RPM Spindle tilt adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Height-adjustable work table Pneumatic spindle control with foot pedal

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, DRILLING AND MILLING MACHINE MTP ZAY7025V - 700 X 180 MM Manufacturer: Metal Technics Polska Model: MTP ZAY7025V Year: 2026 Condition: New, fully functional Price: EUR 2,125 net EXW + VAT where applicable Location: Sokolow Podlaski, Poland DESCRIPTION The Metal Technics Polska MTP ZAY7025V is a compact and versatile drilling and milling machine designed for drilling, milling, tapping and general machining operations. With infinitely variable spindle speed, a tilting milling head and a large precision cross table, the machine is suitable for metalworking workshops, maintenance departments, tool rooms, educational facilities and small-scale production. The machine is available with 400 V three-phase or 230 V single-phase power supply. MAIN ADVANTAGES • Drilling, milling and tapping in one machine • Forward and reverse spindle rotation for thread cutting • Infinitely variable spindle speed: 50-3000 rpm • 2-speed gearbox for efficient power transmission • Milling head tiltable from -90° to +90° • Large cross table: 700 x 180 mm • Digital spindle speed display • Digital spindle feed display • High concentricity thanks to precision spindle bearings • Ergonomic control panel • Safety guard • EMC filter according to CE requirements • Compact and robust construction • Choice of 400 V three-phase or 230 V single-phase TECHNICAL DATA • Drilling capacity in steel: 25 mm • Maximum face mill diameter: 80 mm • Maximum end mill diameter: 25 mm • Spindle taper: MT3 • Spindle travel: 52 mm • Spindle speed: 50-3000 rpm • Motor power: 1.0 kW • Table size: 700 x 180 mm • X-axis travel: 490 mm • Y-axis travel: 160 mm • T-slot size: 12 mm • Milling head inclination: -90° / +90° • Milling head height adjustment: 275 mm Tjdsytpl Uspfx Ahmec • Distance spindle to column: 170 mm • Spindle-to-table distance: 45-325 mm • Dimensions (L x W x H): 950 x 560 x 930 mm • Weight: 160 kg • Power supply: 400 V three-phase / 230 V single-phase STANDARD EQUIPMENT • B-16 drill chuck • Arbor • Digital spindle feed display • Digital spindle speed display • Forward/reverse spindle function • Safety guard • EMC filter • Service tools • Machine base / stand • Documentation and operating manual DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide your delivery address or postal code to receive a transport quotation. The MTP ZAY7025V is an efficient and affordable solution for customers requiring drilling, milling and tapping capabilities in one compact professional machine. Contact us for availability, transport quotation or information about other Metal Technics Polska machines.

Condition: used, Jig boring/Milling machine HAUSER OP3 Travel X: 400 mm Travel Y: 250 mm Travel Z: 400 mm Cone: CM2 Spindle exit: 130 mm Spindle speedfrom 60 to 3000 RPM Table size: 590 x 320 mm Maxi distance spindle/table: 570 mm Drilling capacity in steel: 20 mm Scale 2 axes MITUTOYO Auto descent: 0,03 mm/min - 0,06 mm/min Variable speed drive at the spindle Tsdpjz H Si Sofx Ahmoc Voltage: 220 V Tri Width: 1600 mm Depth: 1600 mm Total height: 1600 mm Weight: approx 1,4 T

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tsdpfx Aoznn Hrshmec Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG Tedpfxog Uq Dfj Ahmec General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Tjdez A D H Uopfx Ahmec Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Tjdsyahv Sopfx Ahmoc Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes Wction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Todpfxjvwf Dks Ahmoc

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, T-slot Milling Machine - SACHMAN Model: THORA RT Year: 2016 Control Unit: HAIDENAIN 530 X-axis travel: 2000 Y-axis travel: 1200 Z-axis travel: 1200 Table length: 1200 Table width: 1200 Tedpfsz Hqavjx Ahmec Maximum workpiece dimensions: D.1600 x H.950 Table surface with threaded holes Maximum workpiece weight: 5000 KG Spindle speed: 5000 rpm Spindle mount: ISO 50 Torque (continuous / 10 min): 637 Nm Number of tool positions: 40 • Chip conveyor • High-pressure coolant system, 15 bar, with filtration system • Cooling system for spindle motor and headstock bearings • Automatic counterbalance system • Air conditioning for the electrical cabinet • Renishaw touch probe • Renishaw laser tool presetting system

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Todpfx Ahszmt U Esmoc