Used Mmd 3000 Fruit Washing Machine for sale (67,120)

Year of construction: 2026, condition: new, machine/vehicle number: 123456, MMD 3000 washing system with pivoting brush The unwashed fruit is fed into the system, and after a pre-wash, it is further cleaned by another spray of fresh water on the conveyor belt. Easy to clean, equipped with durable, food-grade polypropylene/acetal modular belts with steplessly adjustable belt speed in two directions, with two steerable rollers and two fixed rollers, or with anti-vibration feet. Requires minimal maintenance. Technical data: - Rated capacity: 1000-2000 kg/h - Power consumption: 3 kW, 400 V, 16 A, three-phase - Material: Material no. 1.4301, AISI 304 stainless steel - Dimensions: 3325x800x2200 mm - Discharge height: 1380 mm - Weight: 240 kg - Washing tank water capacity: 280 L/shift - Water consumption: 20-100 L/h (depending on settings) - Water connection: ¾” quick coupling - IP65 electronics - Steplessly adjustable belt speed - Brush equipped with a durable hammer (also suitable for beets and quince) Options: Blsdpfx Aod Aqmzehmjn - Different sieve inserts for the attrition mill: for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – Sensitive sensor that allows the fruit washing system and any type of Maurer belt press to operate in coordination with the washing system without clogging - Adaptive electric valve – The fresh water spray only works when the conveyor belt is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from the surface of the fruit, so that less water ends up in the final product - Circulation pump with filter – ensures the correct flow in the washing tank

Condition: good (used), The machine used for washing fruit and olives is in good condition Bledpjvtf T Djfx Ahmen

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Bedpfx Ajxp Urwjhmsln Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Bsdpjxpyfvofx Ahmjln Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Bedpfxsu Ixkpj Ahmoln

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Blodpfx Ajt Ity Djhmen Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1406, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Video recorded 19.3.2026 • Previously in professional denim-finishing production (MASI "Pesumasin No 2") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation. Sales Terms Bljdpfx Ahezmvgwjmsn Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes Bjdpfx Ahszmt S Domoln • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Bjdpfx Ahev Ihgvemoln

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us. Bljdszyc Rijpfx Ahmjn

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed Bjdez A Ictjpfx Ahmjln • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. Bsdpfx Asz Ag Ukshmeln If you have any questions or require more information, please send us a message or call us.

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Bsdpfoz Hvl Rex Ahmsln Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Year of construction: 2026, condition: new, Specifications: - Performance: 3000 kg/h - Electric demands: 0,75 kW, 400 V, 16 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x2100x2800 mm - Output height: 1820 mm - Weight: 135 kg Bledjfd E Trspfx Ahmen - Tub water capacity: 280 L/shift - Washing water supply: (20-100L/h depending on the setting) - Water connection: 3/4“ quick connector - IP65 certified electronics The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour Blodpfxjxw Tg No Ahmon # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: Blodpsymax Eofx Ahmsn - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Bljdjv Sa I Tspfx Ahmsn While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: used, Year of construction: 1998, functionality: fully functional, total length: 2,000 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 2,500 kg, We are offering this used Milnor 42032F7S, 75 kg load capacity front-loading washing machine, manufactured in 1998, in operational condition. Bedez Dupvopfx Ahmsln If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: - Completely stainless steel - Steam heated - Equipped with infeed conveyor belt, width 1100 mm - Tilting device with infeed guide - Discharge screening system Bedeyiyxkepfx Ahmjln - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Price includes disassembly Loading is included. Transport by arrangement Inspection possible on site. Kind regards, Leo Holland

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel Bljdpfsymaw Ujx Ahmjn NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Bedoxp Urdjpfx Ahmeln Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: like new (used), Year of construction: 2015, machine/vehicle number: Nr.2012/15, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, total width: 2,000 mm, total length: 9,085 mm, total height: 2,713 mm, overall weight: 1,400 kg, 1. Technical Specifications Parameter Specification / Value Blsdpfoz A D Rtjx Ahmjn - Manufacturer / Brand Schraml Glastechnik GmbH (LiSEC / LiTROS Group) - Model / Type topCLEAR TC 20 Super-4 - Serial Number 2012/15 - Year of Manufacture 2015 - Direction of Operation From right to left (R → L) - Working / Operating Height 580 mm - Maximum Washing Height 2,000 mm - Glass Thickness 3 – 20 mm - Minimum Glass Dimensions 300 mm x 50 mm - Number of Washing Brushes 4 pieces (2 pairs for double-sided intensive cleaning) - Transport Speed Adjustable, 1 – 5 m/min - Total Weight 1,400 kg - Dimensions: L: 9085 mm H: 2700 mm W: 2000 mm

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Blsdpfx Asq Nl Aqjhmen Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Lisec VHW - 25/6M Washing Machine - Year: 2008 Bljdpfx Aozxttfohmjn - Weight: 4,878 kg - Power: 75, 10 A - Brushes: 8 - Includes pre-washing zone - Glass thickness: 3-20 mm Inspection possible at our location. Please contact us for more information.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, input current: 32 A, I am selling a spray washing system in very good condition, ready for immediate use. The system was manufactured in Finland and has seen very little use. The last photo shows a new machine, still in production today, in its original condition. Manufacturer: Sampo, Model: SR 100. Completely made of stainless steel. The machine is insulated and equipped with an oil separator and a flue gas extraction system. Temperature control up to 90°C and timer. Pressure: 5.5 bar. Round filling area: 100 cm. Height: 75 cm. The machine is ready for immediate operation. A video can be sent upon request. Shipping to all EU countries is possible. Blodpfx Aoz Eiitjhmsn