Used Montech Tb30-185M 155 X 460 Mm for sale (93,295)

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-185M with adjustable guide rails -Speed: frequency-controlled 38.3 - 51.1 m/min -Drive: Oriental Motor 120W, see photo of the nameplate Hnjdpfx Asyh Uvlob Nol -Voltage: 0-240V / 0-333Hz -Belt width: 155 mm -Conveyor length: 460 mm -Transport dimensions: 460/345/H200 mm -Weight: 11 kg

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-140/M with servo motor -Speed: 87 m/min Hnjdpsyiay Esfx Ab Njl -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Belt width: 110 mm -Conveyor length: 1290 mm -Transport dimensions: 1310/390/H160 mm -Weight: 15.2 kg

Condition: good (used), Technical data for the pallet rack beam: Racking system: Jung Heinrich Type: Esmena Scope of delivery includes: 01x Pallet rack beam, used Material color: green Box profile: 155 x 55 mm Claw: 4 hooks Clear span: 3,610 mm 02x Safety pin, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Hedpfx Aow Upxweb Nenl Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be individually inquired at our company depending on the delivery location and scope.

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Hjdpsyia Enefx Ab Njnl -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Strap width: 2x 15 mm -Conveyor length: 1290 mm -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Condition: good (used), Technical data for pallet racking upright: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x pallet racking upright, used Material colour: grey Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) Height: 8,500 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hnjdsw Ea H Ujpfx Ab Nsl General information about the item: This item is only available for collection. Any requested transportation or dispatch of this item is subject to additional costs, which can be provided separately depending on the delivery location and scope of delivery.

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm Hnedsv U Tr Dspfx Ab Njl -Height: 460 mm, adjustable -Number: 13 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H460 mm -Weight: 11 kg/piece

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Hjdjt Rbhujpfx Ab Njnl -Dust extraction fan: Radial fan type DN 160 -Motor: Dietz 1.0 kW 2850 rpm -Volume flow: 30 m³/min / 1800 m³/h -Connection: inlet Ø 140 mm -Connection: Output 135 x 135 mm -Dimensions: 470/300/H365 mm -Weight: 17.7 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 155 mm -Drum: Ø 200 mm -Hole: Ø 70 x 105 mm -Bolt circle: Ø 90 mm M8 -Quantity: 1x drum available -Dimensions: Ø 200 x 155 mm -Weight: 8.3 kg Hnodpjvxg Itjfx Ab Nel

Condition: used, Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel with grooved profile -Outside: Ø 460 mm -Width: 80mm Hnsdpfoqva I Hex Ab Nel -Receptacle: Ø 203 mm -Total weight: 18.9 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Hjdot H Trwspfx Ab Njnl -Conveyor belt rollers: Transport rollers diameter 155 mm -Transport width: 420 mm -Number: 4x transport rollers available -Price: per piece -Dimensions: Ø 155 x 475 mm -Weight: 14.5 kg/piece

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 155 mm Hjdpfx Aovxgzgjb Nenl -Drum: Ø 200 mm -Hole: Ø 47 x 135 mm -Number: 4x drums available -Price: per piece -Dimensions: Ø 200 x 155 mm -Weight: 8.0 kg/piece

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm Hnjdpfevzni Rox Ab Njl -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

Condition: used, Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Side walls pair -Price: complete -Dimensions each: 1395/460/H15 mm -Total weight: 16 kg Hodpod Sm U Ujfx Ab Nenl

Condition: good (used), The scope of delivery includes: 1x welded grating, used Material color: hot-dip galvanized Total depth: approx. 2,460 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Hodpfxewl U S So Ab Nenl Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 49.61 kg Internal designation: GR-126 Note: - 2 L-bracket welded on each side for locking - The grating may have damage, scratches, and dents. Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Four-way tool post Hjdpfx Aodcwzusb Nsnl Steel height 60 mm Dimensions: L 190 x W. 185 mm

Condition: excellent (used), Dimensions: 5000x 360mm Quantity: 1 piece Price/piece Hnedpfx Abohink Ds Nsl

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames. Hnjdpeyvzkijfx Ab Njl

Condition: used, Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø200 x 185 mm Hedpfx Abjlvylnj Nenl -Item no.: 814 682 65 -Heating power: 5640 W -Voltage: 220V -Dimensions: 285/215/H185 mm -Weight: 3.3 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, dust blow-off machine, roller conveyor cleaning machine -with adjustable baffle -Compressed air blow-off nozzles below/above -Roll width: 950 mm -Conveying length: 4600 mm -Diameter roller: 85 mm -Center distance: 150 mm -Height: mm Hnsdpeb Ryn Usfx Ab Nol -driven: via gearbox -Geared motor: 0.25 kW -Speed: m/min -Dimensions: 1400/4700/H1400 mm -Weight: 600 kg

Condition: used, Radial fan, chip extraction fan, fan, extraction, chip blower, fan wheel, blower, fan -Fan wheel: for extractor fan Hsdpfeurn Siex Ab Nsnl -Connection input: Ø 280 mm -Hole: Ø 12 x 33 mm -Dimensions: Ø 340 x 185 mm -Weight: 1.3 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: ttw, belt conveyor with base frame, height adjustable and tiltable -Type: VB -Speed: 3,65 m/min -Belt width: 400 mm Hnsdpfx Abjv T Utts Nel -Conveyor length: 1555 mm -Drive: 0.18 kW, see photo nameplate -Transport dimensions: 1585/610/H1065 mm -Weight: 62 kg

Condition: good (used), Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating Hodpfx Ajdna Aaeb Nsnl -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either Hedpfx Absd En R De Nsnl the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 4 rollers -Type: VICO FLEX -Width: 460 mm Hnodpox Ewvmjfx Ab Nol -Length: 10 m / 8.170 m / 8.830 m / 10.5 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: -Total weight: 225 kg

Condition: used, Included in the delivery: 01x Pallet rack beam, used Material color: yellow Beam type: 7BB Box profile: 120 x 50 mm Design: End beam Bracket: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load 02x Safety pins, used Hnjdpfoy Nxf Dox Ab Nel Design: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These costs depend on the delivery location and scope of delivery and can be requested from us separately.