Used Moulder Planer With Infeed 100 M/Min for sale (86,909)

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers Dodpfx Aon Slk Uegmsck pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately Dsdpfx Asxb U Txsgmjck -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: excellent (used), LECEB S300 HIGH SPEED MOULDER INFEED CAPABLE OF FEEDING LONG AND SHORT BOARDS AT HIGH SPEED UP TO 3OOM/MIN+ Dsdszmmrqjpfx Agmsck SUITABLE FOR FEEDING SHORT LENGTHS DOWN TO 2.05M WITHOUT LOSS OF EFFICIENCY SUITABLE FOR LENGTHS UP TO 6.0M SUITABLE FOR THICKNESS FROM 8MM+ SUITABLE FOR RECEIVING RESAWN BOARDS WHICH CAN BE AUTOMATICALLY LOADED TO THE MAGAZINE FOR HIGH SPEED FEEDING VERY SUITABLE FOR USE IN BETWEEN SPLITTING SAW MOULDER (OR RESAW) AND HIGH SPEED MOULDER

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Dcsdpfxjzn N T Te Agmsk Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Dcjdpfjwud Tkox Agmjk Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: reconditioned (used), functionality: fully functional, The Aciera F3 is a compact, precision bench milling machine renowned for its robust construction and excellent surface finish. Widely used in toolrooms and prototyping workshops, it provides precise control for machining small to medium-sized parts. Dcedsznh Ehspfx Agmek

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Dedpfx Asygtzyjgmeck

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition Dsdpjw Nzrfefx Agmock oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES Dcedpfx Ajxplxzjgmok EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: excellent (used), functionality: fully functional, Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Manufacturer: Braby Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 16,000 mm Total height: approx. 19,750 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.5 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 90° Equipment and connections: In the upper floor: 1 x access dome DN 600 with hinged cover 1 x ventilation nozzle with insect screen 1 x roof edge railing with handrail 2 x crane eyelets 1 x flange for filling line Various nozzles for measuring and control technology On the shell: 1 x access door approx. 850 x 2,000 1 x filling pipe NW 80 1 x cable duct Dsdpfelg A Uuox Agmjck 1 x nozzle for level indicator Various pipe support brackets for filling pipe The silo ends at the bottom in a 60° cone with a flange. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Otherwise, as per the pictures and drawing.

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Available quantity: 4 Dcedpfx Aoipyq Njgmek Diameter: approx. 3,500 mm Cylindrical height: approx. 9,900 mm Overall height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the upper section: 15° Equipment and connections: In the upper section: 1 x access and ventilation opening DN 600 with cover 1 x ventilation opening with cap 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane lugs On the shell: 1 x access door 850 x 2000 mm with ventilation slots 6 x pipe supports for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower base ring The silo ends at the bottom in a 90° cone with flange DN 200 (discharge height: 1,000 mm). Additional cost: Two of the silos have a two-section ladder with fall protection (including 1 rest platform). The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its functionality! Please note that the two silos differ slightly in their connections and their positions. Otherwise, as per the images and drawing.

Condition: used, Aluminum silo with long support skirt Technical specifications / Dimensions Available units: 1 Volume: approx. 105,000 liters Type of vessel: Silo Condition: Used Food-grade: No Design: Upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: Non-pressurized Material / Construction Inner shell material: Aluminum Equipment Support design: Base ring/support skirt Mounting: Fixed Top head type: Conical roof Slope: approx. 15 degrees Bottom head type: Cone Dcjdpfx Agotxitcomok Cone angle: 60 degrees Top section: 2 x crane lugs 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (SiloPilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: 2 x flange DN 32 (min-max indicator) 1 x filling line, leading into the top of the silo and ending at the TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection conduit Remarks: - The silo ends at the bottom in a 60° cone with flange and extraction box. - The silo has cosmetic defects (brown discoloration, various drilled holes for cable ducts in the support skirt), which do not affect the functionality of the silo. The currently connected measurement and control equipment is included. However, no warranty is given for its functionality!

Condition: excellent (used), Year of construction: 2017, VUTEK H100 3.2m Fast LED Hybrid printer Speed exceeding 450 m²/h Color 6C (white disabled) Roll option 3.2m 2 tables under efi full service Djdpfx Asza U Saegmsck new belt installed on 04-26 via efi Recently, 4 new printheads were replaced (defective solder joints on the nozzles).

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release Dcedexv A Nqepfx Agmok The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Dcedezpbufepfx Agmsk Weight: 21.2 kg

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Dcjdpfx Ajzn N Aujgmsk Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Dedpfx Aju Ixt Dogmjck

Condition: excellent (used), For sale is a Rietschle CL 25 VE vacuum pump from the renowned German manufacturer, Rietschle. This unit is designed for creating a vacuum in machines, production lines, and vacuum gripper and table systems. The pump is equipped with an oil tank with a level indicator and an electric drive. Its robust construction guarantees a long service life and reliable operation. The visual condition matches the photos – it shows normal signs of use. Technical data: Manufacturer: Rietschle Model: CL 25 VE Serial number: 325202 Country of origin: West Germany Capacity: 25 m³/h Rotational speed: 1400 rpm Maximum vacuum: ≥ 90% Motor power: 1.1 kW (1.5 hp) Power supply: 380/220 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Applications Dedpfx Aezi Hf Aogmock The pump is used in various applications, including: CNC machines, woodworking machines, packaging equipment, vacuum tables, vacuum grippers, vacuum conveying systems, laboratory equipment, production lines. Advantages: robust construction, German-made, high capacity of 25 m³/h, durable, oil-lubricated rotary vane pump, oil level indicator for easy operation monitoring, easy installation and connection.

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Fan is used in: • Dedusting installations • Extraction systems • Ventilation systems • Wood and metalworking industries Dodpeyuqr Ejfx Agmeck • Air transport systems Technical data • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: new, Year of construction: 2026, machine/vehicle number: 20251211002, fuel type: diesel, motor manufacturer: Cummins 6BT5.9-GM83, General information Field of application: Construction Dcjdpfjy Uqzzex Agmjk Weights Empty weight: 1.130 kg Functional Generator capacity: 100 kVA Dimensions of cargo space: 195 x 95 x 127 cm CE mark: yes Other information Fuel consumption: 16 Liter / Hour at 75% Load Generator: Stamford UCM274D1 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel = Remarks = Cooling system: Heat exchanger cooled

Condition: good (used), I am offering a used electric motor from the renowned Siemens brand. The unit was removed from a functional industrial installation. The motor features a robust design, high efficiency, and reliable operation. Technical data: • Manufacturer: Siemens • Type: 1LE10011DA334AA4 • Power: 15 kW • Voltage: 400/690 V Dsdpjzagiqofx Agmjck • Frequency: 50 Hz • Rotational speed: 2955 rpm • Power factor cos φ: 0.88 • Protection class: IP55 • Efficiency class: IE2 • Design: IMB3 (with feet) • Weight: approx. 75 kg • Shaft diameter: approx. 42 mm Condition: Used item. Shows normal signs of wear and tear resulting from operation and storage. Visible crack in the fan cover. Technical condition matches the photos. The motor is suitable for use in industrial machines, pumps, fans, compressors, conveyors, and many other devices requiring a reliable drive.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages Dedpfxsy Uhxkj Agmock - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. Djdsuc Tzvopfx Agmsck We can provide disassembly, assembly and equipment startup services.

Condition: ready for operation (used), DR.KAISER C100 FA-172 Grinding spindle, 7000 rpm, 1.3 kW, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Dedpfx Asx Eq Ipogmock

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Dodpfezmu N Rjx Agmock Automatic format detection. 380V power supply + compressed air.