Used Mtu 18 V 2000 G 63 for sale (78,439)

Condition: good (used), operating hours: 34,700 h, functionality: fully functional, fuel type: diesel, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, type of cooling: water, MTU diesel generator set including exhaust aftertreatment according to 44.BImSchV (from 1/2026, 100mg NOX, 6mg particulates, etc.). A complete overhaul was carried out at 21,000 operating hours for over 100,000 euros. All filters of the exhaust aftertreatment system were replaced in 2025. The exhaust aftertreatment unit can also be purchased separately. Podpfx Asy Nbt Rsi Tjrc

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Weight: 2,450 kg Generator data: Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Prsdpfezzxa Aex Ai Tjc Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Pjdpfx Aijq I Shas Tjrc

Condition: used, Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Complete set of 3 x MTU 16V4000 GS (16V4000L64) with Skid cooling groups Radiators Absorption chiller Genset outgoing breakers Lube oil systems Electrical auixiliaries panels MTU - MCS , MTU - MMC panels =Technical specifications= Time for delivery - in stock Pjdozmnzajpfx Ai Terc Engine type - 16V4000L64 Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Voltage - 400 V Frequency - 50 Hz =Other information= Production country - Germany

Condition: new, fuel type: diesel, color: white, power: 1,000 kW (1,359.62 HP), total length: 6,000 mm, total width: 2,200 mm, total height: 2,100 mm, Year of construction: 2010 Empty weight: 10.850 kg Pedpfxj Adtine Ai Tjrc Generator capacity: 1.250 kVA Availability: in stock Current frequency: 60 Hz

Condition: used, Year of construction: 2008, SDMO X2200C Power (KVA): 2200 Podpfxszqzrte Ai Tsrc Working hours: 23

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, number of cylinders: 12, MTU E3042D3, 12V400GS engine Deeply refurbished, repainted. New cylinder sleeves, new pistons, new oil pump etc. Predpjywg Ipjfx Ai Tsc Missing only oil pan.

Condition: used, Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: RATM 0445, fuel type: gas, color: silver, power: 132 kW (179.47 HP), output current: 270 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 400 kW (543.85 HP), continuous power (apparent): 187 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 15 units available, MTU, Leroy-Somer based ONSITE ENERGY units. 7 units worked 5 years x approx. 7000 hours yearly. 5 of those overhauled last year. 8 units worked 2 years x approx. 7000 hours yearly. 3 of those overhauled last year. All units has Leroy-Samer LSAC 47.2 S5 C6S/4 generator. Under separate agreement we can rebuild genset to diesel version. Potentially Leroy-Samer LSAC 47.2 S5 C6S/4 generator can be sold separately. Psdpfxexcvflj Ai Tsrc

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm Prodpfx Asz D Uv Nsi Tsc L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: used, Year of construction: 2000, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (610) Prjdpfxjz D U Hbe Ai Tjc Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1598 bar Stroke volume: 399 cm³ Shot weight (PS): 360 g Max. dosing stroke: 203 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2006, operating hours: 71,000 h, functionality: fully functional, MTU 16V 4000 GS L61 gas generator. Year of manufacture: 2006. Operating hours: 71,000. Voltage: 10,000 V. Delivery includes: * genset on skid * gas train control panel * pump unit * documentation and logbook. In fully operational condition. Podey At Awjpfx Ai Tjrc

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 tons Stroke rate: 400 strokes/min Material and feed data Sheet width: 180 mm Strip width: 180 mm Feed length: 150 mm Stroke data Pjdpj Aa Nhlefx Ai Torc Stroke: 10–80 mm Control and electrical system Control: KAISER Voltage: 380 V Dimensions Space requirement: approx. 1.85 × 2.70 × 3.00 m EQUIPMENT Original KAISER strip feed, model ZR 18 D

Condition: used, Year of construction: 2012, Claas Jaguar 960 All-Wheel Drive V-Max 18, Orbis 750 Cracker, year of manufacture 2019 (Int. No. 15540) Year of manufacture: 2012 4,622 drum hours, 3,821 operating hours, 3,728 effective operating hours, 10,265 hectares 40 km/h, 8-cylinder V Mercedes OM 502, 458 kW / 623 hp Corn cracker MCCL/Max, year of manufacture 2019 (80%) Automatic hitch, V18 V-Max drum, 36 knives (80%), Intensive cracker L, 125/125 teeth, Standard crop flow system, Corn cracker, gap adjustment electro-hydraulically, Silage additive system with integrated tank, Discharge chute, HD version with starting safety device, Header extension L for 10-row attachments, Header lighting, synchronized pivoting, Tire pressure control system for drive axle tires, 4-Trac steering axle, Fuel consumption measurement, Fuel filter with water separator, small, Wiper system for side and rear window, Printer for CEBIS terminal, Telematics data management, Rear camera with CEBIS display, Comfort seat, air-suspended, Working lights, Xenon, CLAAS communication module, Auto Pilot Module 4WD, OPTI FILL pivoting system, AUTO FILL wagon filling system, Software for Auto Pilot row feeler corn, Rearview mirror, electrically adjustable and heated, Central lubrication system, automatic Tires: 800-70 R32, 80% 600-65 R28, 90% Pede Af Rmqjpfx Ai Torc Orbis 750 hydraulically foldable with wavy knives Roller metal detector, NEW, Universal knives, one season of corn, approx. 180 hectares Options: Orbis 600 – Reduced price: 2,000 EUR plus VAT. Kemper 360 – Additional cost: 4,500 EUR plus VAT. Kemper 460 – Additional cost: 14,000 EUR plus VAT. Kemper 375 – Additional cost: 19,000 EUR plus VAT. Pickup 3m HD – 1,600 EUR plus VAT. Chassis for Orbis – 4,500 EUR plus VAT. V Claasik – Additional cost: 6,000 EUR plus VAT. Direct Disc 520, year of manufacture 2012 – 26,000 EUR plus VAT. Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of taking another machine in part exchange.

Condition: new, power: 850 kW (1,155.68 HP), total length: 6,400 mm, total width: 2,100 mm, total height: 2,640 mm, Year of construction: 2006 Pjdpjzx D Rhefx Ai Terc

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm Prodpou Id Dbofx Ai Tjc spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: new, functionality: fully functional, fuel type: diesel, power: 1,120 kW (1,522.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,400 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Genset Psdpey Hc Dxjfx Ai Terc Raditor Agc 4 controller Silencer Compansator Batteries/ filters First filling of oil and antifreeze =Technical specifications= Time for delivery - in stock Engine type - 18V2000G76F Prime power - 1000 kW (1250 kVA) Emergency supply power - 1120 kW (1400 kVA) Engine speed - 1500 rpm Alternator type - Leroy Somer LSA 50.2 L7 Voltage - 400 V Frequency - 50 HZ =Other information= Production country - Germany

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Prsdpfx Aioff Efae Tsc Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, KUKA KR 180 Series 2000 robot with a 3-meter process axis. Max. weight: 180 kg Max. reach: 2700 mm Max. payload: 180 kg Dimensions: 2700 mm Number of axes: 7 Year of manufacture: 2001 Scope of supply: Robot, controller, cables, teach pendant, wiring diagram. Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two weeks start-up warranty. No further warranty. Spare parts are continuously available in stock. The robot is fully functional and can be inspected. Prjdpfx Aisz Rl Uds Toc Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2003, Power (KVA): 2000 Working hours: 226 Pjdpfxoy S Sy Hj Ai Tjrc

Condition: good (used), Year of construction: 2002, Seal cutter for glass bottles Threaded clevis Slightly used Pjdevtruzepfx Ai Tjrc

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Robot: 812358 / Controller: 46122, overall weight: 1,430 kg, load capacity: 150 kg, arm reach: 3,100 mm, For sale is a used KUKA industrial robot, model KR 210 L150 2000, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2004 (manipulator) and 2007 (controller), offering a payload capacity of 150 kg and an extended reach of 3100 mm in the L version. The system is also configured with "absolute accuracy" measurement, providing increased path accuracy for precision applications. Areas of application include handling, assembly, palletizing, and automated manufacturing processes. Serial numbers are 812358 (robot) and 46122 (controller). Prodpfx Aioy N Ei Ae Tec

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Commissioning: 2001 Psdpfx Aiot I Tpls Tsrc Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2010, Control measuring range: 50g-150g, accuracy class: XIII(1), scale graduation: 1g, readability: 1g, product weight min./max.: 10g/500g, cadence: 90rpm, measuring speed: 0.52m/s. Documentation available. On-site inspection is possible. Pedpfx Aiewqf T Rj Tjrc

Condition: new, Year of construction: 2026, Motorized thickness table adjustment with two speeds Digital display for working height Podpfx Asy Eg Apei Terc Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard with noise and chip protection curtain at infeed and outfeed Adjustable pressure for feed rollers Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter changes in seconds When the machine starts, centrifugal force automatically tensions the blades – self-locking Blade projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard with electric table adjustment A special lifting system ensures the table position is perfectly maintained even without mechanical locking Helical-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated outfeed roller Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser 150 mm Drive Performance Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation: Measurements account for maximum travel or usable length. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Working area explanation: Please add stated dimensions to space requirement to obtain the recommended clear installation area for the machine. Thicknessing Thickness table length 630 mm Thickness table width 1000 mm Min. working height 3.5 mm Max. working height 300 mm Min. working length 210 mm Max. cutting depth 8 mm Electrical Data Connection voltage 400 V Phases 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of blades 4 Speed 4,500 rpm Max. planing width 630 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW Extended machine accessories Die lifters with balls for die change IMCO Press force measurement Pedpfxjw Tuqpe Ai Tsrc Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm