Used Multicracker Benelux B.v. Agricracker Ac100 for sale (7,196)

Year of construction: 2024, condition: new, The Agricracker AC100 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-3 ton / hour. Flyer at the bottom of this page. Hodsg Ugbgopfx Al Sol Milling trials are possible.

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Hsdog Ugbrjpfx Al Sol Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. Hodovf E Avjpfx Al Sel New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material Hedsviwdmspfx Al Sel SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 1986, Format: 0x0 Hsdpfx Aleyf Iipo Sjl

Condition: new, Powder dissolver New condition, stainless steel construction Used Alfa-Laval LKH 25/190 11kW --> Excellent condition centrifugal pump Hsdpfoy D Dvwjx Al Sol Capacity Up to 65,000 l/h --> 9,000 kg/h DN65 couplings Application The powder dissolver can be used in any process where powder is added first and is then dissolved in liquid. Examples: - Powdered milk. - Whey. - Chocolates. - Sauces. - Brines. - Fertilizers. - Lactose. - Stabilizers, mixtures with milk. - Pesticides, etc. Including manual

Condition: excellent (used), functionality: fully functional, overall weight: 3,300 kg, Year of construction: 2010, Model: GVZ 3000-D-S Opening width: approx. 2.60 m incl. CW55 adapter plate (e.g. for CAT 345) Hjdpfjtgpg Iex Al Sel

Condition: excellent (used), functionality: fully functional, Dosing/filling line The dosing/filling line consists of: 1. Product pump with inlet hopper Brand Rademaker B.V. Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3, Conveyor belt Hjdpfx Aowaty Rel Sol Brand Meyer Plastic mesh belt Belt width: 910 mm Overall dimensions: 3400 mm x 1500 mm x 1690 mm Including trolley with additional parts.

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Material width 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm. Hsdpfsv Utd Hsx Al Ssl

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 250206, total width: 550 mm, total length: 1,500 mm, total height: 850 mm, empty load weight: 300 kg, Export is possible. Hedpfsyw N Rgex Al Sjl

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Hodoyw N H Uopfx Al Ssl

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0570, We offer this used Hoba B.v. HSA 5 bread cutter, year of manufacture 2012, this machine was bought new directly from HOBA In this package we have the following items: 1 x Holly Slicer Type HSA 5 1 x Holly Bagloader Type HBS Hjdpeydp Rfofx Al Sel 1 x Holly Packaging Line HTA 15 1 x Infeed system.

Year of construction: 2021, condition: used, functionality: fully functional, machine/vehicle number: 4601230000, Hosokawa Micron B.V. Flexomix FXD-250 Intensive Mixer / Vertical Mixer – Year of Manufacture: 2021 Manufacturer: Hosokawa Micron B.V., Netherlands Type: FXD-250 (Flexomix) Machine Number: 4601230000 Year of Manufacture: 2021 Hsdpfoyn Nhfjx Al Sjl Condition: Used, good technical condition Availability: Upon agreement Technical Data – General Empty weight: approx. 950 kg Max. bulk density of product: 0.7 – 0.8 kg/l Product area / housing: atmospheric ATEX: not available (N/A) Temperature Ranges Ambient: 0°C to +40°C Storage: -10°C to +60°C Operation: Product area: 0°C to +75°C Housing: 0°C to +65°C Liquid supply: 0°C to +75°C Design: Product area: up to 80°C Housing: up to 70°C Liquid supply: up to 80°C Pressure Design pressure: Product area / housing: atmospheric Liquid: 5 barg Operating pressure: Product area / housing: atmospheric Liquid: 4 barg Nozzle Configuration 1 liquid system 4 nozzle holders (2 nozzles each) 8x standard HMBV nozzles Max. air consumption (nozzles): 120 Nm³/h Power and Media Connections Power supply: 3x 400 V AC / 50 Hz Control: 24 V DC Machine protection rating: IP55 Network type: TN-S Compressed air / nitrogen: 7–8 bar(g), clean, dry, oil-free Max. total air consumption: 149 Nm³/h Nominal current: 27 A Drive Manufacturer: Siemens Type: 1LE1603 Power: 15 kW Speed: 3000 rpm Protection class: IP55 Frame size: 160M Insulation class: F Note: Operation above 3000 rpm is not permitted according to manufacturer instructions. Bearings Permanently lubricated bearings, re-lubrication not required Foundation Forces Static vertical force: 9500 N Dynamic vertical force: 2100 N Dynamic horizontal force: 300 N Recommended vibration dampers: 4 pieces, Ø 100 mm, height 55 mm, 65° Shore Application The machine was used for mixing: Glass powder + CaCO₃ + water glass Suitable for high-intensity powder-liquid mixing processes. Scope of Delivery: - Complete mixing unit - Siemens main drive - Nozzle system - Documentation in accordance with FAT (sound level included in FAT document) - GA drawing 4601230201 available A viewing appointment can be arranged upon request. Loading can be organized.

Condition: ready for operation (used), Year of construction: 1998, Tank volume: 350l, permissible operating pressure: 6bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1kg. Hedpfxet R Trxj Al Sol

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Hodpfx Asuzlg Djl Ssl

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) Hjdpfx Aeri Slmel Sol - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: W722, 2 pieces of carton erector, folding and gluing machine with Norton adhesive system. Both machines are operational but heavily used. Hsdsxam Sqopfx Al Sol

Condition: good (used), Year of construction: 2013, Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, configured with 261 destinations – used – : Price for sorter including control system: ex works: €99,500 (net), including dismantling, packing, and loading! Price for the existing Transnorm conveyor technology (approx. 170m): €15,000 (net), including dismantling, packing, and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/hour Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Width of induction station: 2 m Number of trays: 200 units Usable tray size: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 units Product dimensions (L/W/H): Sorter: min: 150 / 120 / 10 mm Max: 600 / 400 / 200 mm Weight: min: 0.25 kg / max: 5 kg No longer available: gravity roller conveyors, pick by light, flap elements. Each sorting station previously had two destinations, separated via a tilting chute into the upper or lower destination roller conveyor. Total number of destinations on the sorter: the system was configured with 261 destinations. Number of special use destinations (overflow, reject, etc.): 3 units A pick by light system is installed at the destination roller conveyor. Condition: good Available immediately Hsdpfxowxu A Ro Al Sel Location: Warehouse in Frankenberg / Saxony Detailed description available upon request as a PDF (in English).

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Hedpfxey Hi A Us Al Sjl

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Hedoyhzubspfx Al Sel Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Available from 05/2026.

Condition: good (used), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Booklet Maker The machine is fully operational and ready for production. Very low mileage. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100m Hodpfxeyur Nfo Al Sel Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g Power supply: 230V Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-200A 10.4″ color touchscreen Non-stop operation thanks to the mis-assembly ejection function Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/hour Weight: 500kg Stitching Wire-folding Two Hohner heads Up to 200 jobs can be saved in the machine’s memory. Additional options include wire feed control and a block stitching module. Horizon FC-200A Cutting thickness 4-5mm 230V power supply Weight 244 kg New trimmer design, stable operation with servo motors, and additional booklet guide. Touch panel for quick format changes. Reset the machine to a different format with a single click. The machine includes: LC-200 delivery, operating tools, spare parts, and documentation.

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20A + FC-20A Booklet Maker Machine setup is via the control panel. Made in Japan. The line consists of: – Horizon VAC-100A / VAC-100M Max size: 350x500mm Min size: 120x148mm Hjdpfxoyrz Tbe Al Sel Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20A Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads Horizon FC-20 Cutting thickness: 88 sheets 230V power supply Weight: 240kg Touchscreen control panel for quick format changes. With a single click, you can retool the machine for a different format. 230V power supply Weight: 490kg The machine includes: delivery, PJ-77R jogging machine, operating tools, additional components, and documentation.

Condition: used, - air suction collator VAC-100a Horizon VAC-100a air-suction collators - technology: touch & work - model: air-suction collator - bins: 10 each collator - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) programs: Hsdjv Haaljpfx Al Sjl - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/qm - loading height: 55mm/ bin - production speed: max. 9.500 cycles/h Bwjbklicou Sr Amjkrek - power: 230V/50Hz - 1,86kW - dimensions: 842x652x1.961mm - weight: 310kg includes Stacker Format: 500 x 350 mm Equipment: Horizon Stacker Receiving Tray with Right-Side Delivery, ST-20R air suction collator VAC-100a Technology: touch & work model: air-suction collator bins: 10 each collator error avoidance: misfeed-,doublefeed- and jamming control saveable jobs: 9 memories for repeat orders extensibility: up to 6 collators (60 bins) stack opportunities: flat or laterally shift

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Hedpjxpv Adjfx Al Sjl Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Trim size: max. 20 mm Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Weight: approx. 240 kg

Condition: used, functionality: fully functional, Equipment: CE marking, Complete BARMAC 200 vertical shaft crusher consisting of a machine frame and discharge chute, electric motor, electrical control panel, and operator panel. GRAVIPAC 1000 vertical shaft crusher consisting of a complete frame, machine, motor, pulley, and belt. Hsdpox Th Eusfx Al Sel