Used Nagron Aerolift - Rietschle R96-20 - Vce 100 for sale (46,776)

Condition: used, Vacuum lifting device for paper rolls, NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg, Netherlands, Type R96-20 Manufacturer's No. 9745, Year of manufacture 1999 Load capacity 2000 kg Centering mandrel, Ø 90 mm Outer diameter of suction surface 850 mm (plus seal) Inner diameter of suction surface 250 mm (minus seal) Seal width 50 mm Suction surface area 0.5 m² Vacuum pressure min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2 x 2.2 kW Mains connection 400 V, 50 Hz - 2 Rietschle vacuum compressors, Type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Overall height in transport frame 2950 mm Weight 2.5 tons. Crjdpfodzqc Ijx Adrsh

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-100 / Excellent technical condition Year of construction: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Injection pressure: 2000 bar Metering volume: 49 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from the Sensor Kistler brand - mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Dimensions Weight: 2300 kg Length/width/height: 3.18x1.47x1.99 m Drive: Pump/motor: 15 kW Heating output: 4.9 kW Total output: 19.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Cjdpfx Ajz Iqyrodrsrh Price: On request

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the pictures. Readings from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100/01073331+01073331 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on Pump Nameplate 000121315715 Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on Valve Nameplate 000121122273 Valve Designation SN 000002 Codsz Ezv Ejpfx Adrjrh The pump is used and shows signs of wear, as visible in the pictures. Before purchasing, it is recommended to compare the complete designations from the nameplates, the shaft, and the connections with the requirements of your machine.

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20 + FC-20 Booklet Maker The machine is in very good condition, well-maintained, and ready to work. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100c Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g Codpfx Adezur A Rerorh 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20 Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads (max. 4) 230V power supply Weight: 490kg Horizon FC-20 Cutting capacity: 88 sheets 230V power supply Weight: 240 kg The machine includes: an LC-20 delivery system, additional EAB-100 compressors, a PK-20 packaging kit, a PJ-75 jogging system, operating tools, spare parts, and full documentation with parts catalogs.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Credpfxszt I Rns Adroh Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 800 x 800 mm, 20 - 100 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 1500 liters, filter surface 20 - 100 m², dimensions 2500 - 9000 x 900 x 1300 mm, weight 3500 - 10000 kg, motor hydraulics, with or without plate transport, with or without filter cloths Credpfx Adofbbp Ssroh

Condition: used, faceplate diameter 1000 mm swing diameter 1400 mm turning height 1100 mm Control Siemens type 840 D Shop Turn Tool changer 12 Pos. x-travel 2000 mm z-travel 700 mm slide adjustment 1000 mm Rapid movement 6000 mm/min turning speeds 500 U/min total power requirement 62 kW K 234/50822 Machine was overhauled in 2010 by Hering with Siemens 840 DSL Shop Turn The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Crodpfx Ajyqtnujdreh than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), IPG Ytterbium Fiber Laser with Controller Here we offer an IPG Ytterbium Fiber Laser with controller. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone. Credpfx Aezdyyvsdroh

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Credpoz Ipi Sjfx Adrsh Price: On request

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Cjdpfotltvzsx Adrerh Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: new, Year of construction: 2016, functionality: fully functional, Elmo Rietschle / Gardner Denver V-VC 202 Vacuum Pump – New Surplus For sale: 2x Elmo Rietschle / Gardner Denver V-VC 202 vacuum pumps. Crsdpfjz A Achjx Adrjh These units are new surplus stock, unused, and still in their original storage condition. Technical specifications: Manufacturer: Elmo Rietschle / Gardner Denver Model: V-VC 202 (20) Type: Vacuum Pump Capacity: 200.0 / 240.0 m³/h Ultimate vacuum: 0.50 / 0.50 mbar (abs) Motor power: 5.5 / 6.3 kW Speed: 1455 / 1755 rpm Frequency: 50 / 60 Hz Voltage: 230/400 V (50 Hz) / 265/460 V (60 Hz) Protection class: IP55 Duty cycle: S1 Year: 2016 Made in Germany Condition: New Surplus / Unused Quantity available: 2 units The pumps have been stored as surplus equipment and are offered in the condition as shown in the pictures. Location: Rotterdam, The Netherlands Availability: Immediately available Worldwide shipping can be arranged.

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Crodpfx Adoz Iqaxorsh Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 ccm Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Fully inspected! Crodsx Rq Rnspfx Adroh PRICE REDUCED FROM 7000 TO 5950 EUR!!!

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Cjdpez Ip Smsfx Adrjrh Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,332 h, functionality: fully functional, machine/vehicle number: 179814, screw diameter: 30 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 79 A, For sale: ARBURG ALLROUNDER 420 C 800-100 injection molding machine Manufacturer: ARBURG Model: ALLROUNDER 420 C 800-100 Year of manufacture: 2000 Control system: Selogica Screw diameter: 30 mm Technical specifications Factory number: 179814 Supply voltage: 400 V Control voltage: 230 V / 24 V Connected power: 42 kW Cedpjzim Tajfx Adrsrh Rated current: 79 A Made in Germany Condition ARBURG hydraulic injection molding machine in good technical condition, regularly maintained. The machine is operational, can be tested, and is ready for immediate use. Key features Selogica control system 30 mm screw Stable, reliable operation Immediately available Can be viewed in operation Location: Sarkad, Hungary Seller: Variflux Kft. Upon request, we can send additional photos, videos, and technical information.

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm Crodpjvb Dcajfx Adroh turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Csdjzd Srwopfx Adrorh Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Model: VAC-100a + VAC-100m × 4 Towers Year of Manufacture: 2010 Number of Towers: 5 Towers Number of Stations: 50 Bins * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 Cedszyfvuspfx Adrerh * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: used, machine/vehicle number: 007998, Max. panel width: 1900 mm Max. panel length: 2700 mm Max. forward feed speed: 30 m/min Codpjw Idacofx Adrjrh

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Crjdpfxozx D Hco Adrjh

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Cjdpfx Adsz Ipzberjrh Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an Arburg injection moulding machine, model 370 C 800-100. Technical Data: Year of manufacture: 2007 Injection unit unfortunately not included Clamping force: 800 kN Crodpeyxqiyefx Adrjh Clearance between tie bars: 370 x 370 mm Max. platen distance: 750 mm Mould installation height: 250 mm Injection unit: 100 Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2017, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift Select robot Year of manufacture: 03.2017 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,669 h in automatic operation Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by a servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: closing of the pneumatic nozzle and dosing device Arburg Multilift Select 6kg robot, traverse Year of manufacture: 11.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic, Axis B - rotation Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Cjdpfxoz Ipy Rj Adrerh Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Crsdjzukkgjpfx Adreh Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland. Credpoznwwajfx Adrjh