Used Narrow Bandsaw for sale (1,541)

Condition: used, Pulley Diameter 700mm Max sawblade width 40mm Table size 765mm x 1000mm Isdpfjwl H Daox Aayetk Table Tilting 0 to 35 degrees Throat capacity 680mm Max. Cutting height 485mm Adjustable rip fence 4 Hp motor and starter DC brake Serial number 80210

Condition: used, Pulley Diameter 700mm Max sawblade width 35mm Table size 980mm x 700mm Max blade length 5120mm Table Tilting 0 to 35 degrees Throat capacity 600mm Itodpjzd Uuhsfx Aaysk Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Weight 435kg

Condition: refurbished (used), Kolbe stainless steel Bandsaws - 7 machines in total Model K430 S Year 2018 Itodpfovzmmuex Aayjk Fixed table Excellent condition

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Iodpfx Aajcr Ru Dsyjtk Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 5,556 h, load capacity: 2,000 kg, lifting height: 6,210 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, construction height: 2,960 mm, fork carriage width: 860 mm, empty load weight: 7,232 kg, total length: 2,600 mm, drive type: Elektro, construction width: 1,280 mm, Very Narrow Aisle Truck Load Center: 600 Mast Type: Triplex Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Cushion Front Tyres Size: 16 1/4x7x11 1/4 Rear Tyres Type: Cushion Rear Tyres Size: 18x7x12 1/8 Battery Voltage: 48V Battery Year: 2026 Description: In addition to this narrow aisle model, we have approximately 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase & financing under favorable terms are always possible. We also purchase your used equipment outright, even if you don't buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this HILOAD 1250. P.S.: Our forklift master workshop specializes in repair, servicing, overhaul, and customized builds for forklifts from 8 tons. We can also place your vehicle for consignment sale at our facility. Isdpjyru H Uofx Aayjtk Side shifter, Full free lift, NEW battery

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Description AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronous running brush for chips removal. Material clamping is performed by a full-stroke sectional vice. The material feed is manual. The cut material outlet is fitted with a slide. The saw band drive is equipped with a frequency convertor that allows the band’s optimal speed to be set against the processed material within the 20-120 m/min range; this significantly increases both the saw band lifetime and the machine productivity. Further, the band is tilted against the vice load surface at 2° angle, which also significantly reduces cutting times and contributes to a longer band lifetime. Thanks to their arms rigidity, double-column bandsaws with a fixed arm position achieve much shorter cutting times (especially in cutting full materials) than machines with articulated saw arms. Key features Both-sided linear guiding of the saw arm Arm laid on linear guiding Ijdpjvk R R Njfx Aayotk Automatic downfeed pressure regulation Simple and clearly arranged control

Condition: good (used), Year of construction: 2015, functionality: fully functional, Description FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS Iedevk Uulopfx Aayetk MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45..... 2. 0 ...TO....60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER Specifications Manufacturer FMB -ORION BANDSAW Model ORION AUTO FEED Year 2015 Condition Used

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Itsdpfexiv Ugjx Aaysk Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Itjdpfx Aasxlfwpjysk Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Itsdpfjxliguex Aayok Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Itodpexivgcefx Aayok Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: used, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: SSB 260 VA Machine type: Fully automatic band saw Design: Hydraulic, automatic feed Cutting range (round): approx. 10–260 mm Cutting range (square): approx. 260 × 260 mm Minimum cut length: approx. 5 mm Automatic feed: approx. 600 mm Multiple feed: up to approx. 5,400 mm (depending on version) Itedpfjzu Dausx Aayjk Cutting speed: approx. 15–125 m/min, infinitely variable Saw band length: approx. 4,115 mm Saw band width: approx. 38–41 mm (depending on version) Saw band thickness: approx. 1.0–1.3 mm Saw motor: approx. 4.0 kW Total connected load: approx. 6.5 kW Machine weight: approx. 2,000–2,200 kg Dimensions: approx. 2,160 × 2,080 × 2,015 mm (depending on version) SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, Year of construction: 1996, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: HBA 360 AU Year of manufacture: 1996 Machine number: 6016 109 181 Weight: approx. 2,600 kg Electrical connection: 400 V Frequency: 50 Hz Power supply: 3~ (three-phase current) Connected load: 10.0 kW Rated current: 35.0 A Maximum cutting range: approx. 360 × 360 mm Maximum round cut: approx. 360 mm Saw band length: approx. 5,334 mm Saw band dimensions: approx. 41 × 1.30 mm (depending on version) Cutting speed: approx. 14–102 m/min Iodpezu A Tyefx Aayetk Automatic material feed: approx. 600 mm stroke Saw band drive: approx. 5.5–6.0 kW Version: automatic high-performance band saw machine Suitable for sawing round, square, and profile material CE marking present Note: The technical data listed above has been compiled based on the nameplate of the specific machine and available information regarding the KASTO HBA 360 AU. Individual technical specifications may vary depending on the year of manufacture, serial number, and equipment configuration. SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, cutting diameter / mm saw band length / mm cutting width / mm Ijdpfozu A Tmsx Aayetk

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw - Cutting dimensions: 330mm x 510mm - 60-degree mitre cut - Variable cutting speed Itedpjzur Dujfx Aayok - Year of manufacture: 2001

Condition: defective spare-parts repository (used), Year of construction: 1986, Behringer band saw, fully automatic, in perfect working order. Isdpfx Aaozvnkyjystk Old, robust technology without sensitive electronics. Maximum cutting capacity at 90°: 500 mm Motor power: 5 kW Saw blade length: 6900 mm Unfortunately, the machine was delivered without a control cabinet. As the previous operator scrapped it, the machine can now only be offered as a source of spare parts. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices do not include VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Machine buying and selling WE BUY/SELL PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality, yet affordable machine for your production? Or would you like to sell yours? For further information or to contact us, please use the contact form.

Condition: used, Year of construction: 1969, functionality: limited functionality, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 1,300 mm, total width: 900 mm, overall weight: 450 kg, table length: 600 mm, table width: 600 mm, Bandsaw from Mössner - Type SM 420 Vertical bandsaw MÖSSNER SM 420 A, year of manufacture 1969. Description: - Factory number: 22600-77/14 Isdpfx Aaezc Hwteystk - with stepless feed - bandsaw welding device IDEAL - machine light - table size approx.: 60cm x 60cm - table adjustable in inclination! - band dimensions: length: 316cm - 326cm max. - overhang approx.: 40cm - space requirement: W x D x H - 1.30m x 0.9m x 2.0m - weight: approx. 560kg Used, with signs of wear! Inspection possible at any time. Machine is disconnected, standing on a pallet and secured with a tension strap. The machine can no longer be switched on, probably a minor problem. Private sale - without guarantee or warranty.

Condition: new, Year of construction: 2025, cutting diameter 1600 mm saw band length 14000 mm cutting width 1600 mm hydraulic motor 3 kW total power requirement 11 kW / 7525 Nm weight of the machine ca. 20 t required space 4020 X 2220 X 7600 mm Custom-made: KSY 1600 × 1600 horizontal band saw Technical specifications: - Max. cutting diameter: 1,600 mm - Saw blade length: 14,000 mm - Cutting width: 1,600 mm - Machine weight: approx. 20 t - Installation dimensions (L × W × H): 4,020 × 2,220 × 7,600 mm Ijdpfjymf Rgex Aayetk Delivery time: approx. 5 months Customised adaptations in terms of dimensions and design are possible by arrangement. Optional equipment: - Clamping devices (choose from conventional, semi-automated or fully automated) - Motorised roller table system - Laser cutting line display - Additional double roller table - PLC control with operating screen - Vibration damping system

Condition: new, cutting diameter 1100 mm saw band length 12000 x 67 mm Iedpfxoymf Ncs Aaystk cutting width 1,6 mm Capacity 90° - round 1100 mm Capacity 90° - rectangle 1100 x 1100 mm Capacity 90° - square 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 12.000 kg dimensions of the machine ca. 3300 x 3000 x 5300 mm The KSS 1100 X 1300 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table, which is 1 metre long.

Condition: new, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm Itjdjymf N Ajpfx Aayek capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size.

Condition: new, Year of construction: 2025, saw band length 3660 x 27 x 0,9 mm cutting width 0,9 mm total power requirement 1,5 kW / 300 Nm weight of the machine ca. 1200 kg dimensions of the machine ca. 1400 x 1900 x 1900 mm The GERD WOLFF KMS 280 V is a precision band saw with servo drive that has been specially developed for consistently precise cutting of round material from 10- 135 mm diameter. Capacity for round material (mm) diameter 10 mm 276 pieces are possible diameter 20 mm 78 pieces are possible diameter 30 mm 36 pieces are possible diameter 40mm 21 pieces are possible diameter 50mm 15 pieces are possible diameter 60mm 6 pieces are possible diameter 70mm 3 pieces are possible diameter 80 mm 3 pieces are possible diameter 90 mm to 135 mm 1 piece is possible Isdpfx Aey S Drzsayetk Feed length in one piece: 780 mm

Condition: new, cutting diameter 280 mm saw band length 3660 mm Itjdpoymf N Njfx Aaysk cutting width 0,9 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 210 x 340 mm feed length 500/2000 mm total power requirement 3 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1300 x 1270 x 1900 m Fully automatic horizontal band saw Cutting range: ROUND MATERIAL : 280MM SQUARE : 270X270MM RECTANGULAR : 210X340MM ABMESSUNGEN DES BANDES : 27X0.9X2660

Condition: new, Year of construction: 2025, cutting diameter 280 mm saw band length 3660 x 27 mm cutting width 0,9 mm capacity 90 degrees: square 270 x 270 mm Iodpfx Aaeyk Ii Hsyetk capacity 90 degrees: flat 210 x 330 mm total power requirement 1,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for consistently accurate cutting.

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8200 x 54 mm cutting width 1,6 mm Capacity 90° - rectangle 650 x 850 mm Capacity 90° - square 650 x 650 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 6400 kg dimensions of the machine ca. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor Itedjyk Ikqopfx Aayok The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 660 mm saw band length 9000x54x1,6 mm cutting width 1,6 mm Capacity 90° - round 660 mm Capacity 90° - square 650 x 650 mm Capacity 90° - rectangle 650 x 1080 mm Capacity 45° - round 660 mm Capacity 45° - square 650 x 650 mm Capacity 45° - rectangle 650 x 670 mm Capacity 30° - round 410 mm Capacity 30° - square 410 x 410 mm Capacity 30° - rectangle 650 x 410 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 7100 kg dimensions of the machine ca. 2500 x 2200 x 4500 mm The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Automatic Angle Rotation - PLC TouchScreen - Blade Breakage Switch / Stop System - Led Lighting Ijdpfeymf R Tsx Aayotk - Swarf Conveyor - Carrying - 2 Pieces 2 Meter Roller Table - USB Connection Output Optional Specifications - Motorized system for roller table - Laser Line - Lubrication mist - Extra double roller table The pictures are for orientation only and do not represent a true-to-scale image of the machine.