Used Nebes Manual Sawing Machine for sale (73,906)

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Godpfoi Ezq Dsx Ahtebr Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Godjfibfgspfx Ahtsbr Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. Gjdogculvopfx Ahtobr It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg Gsdpfozkkc Uox Ahtsbr CE Certification: Included

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Godpfx Aezkkayehtjbr Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 200421-16/0, functionality: fully functional, overall weight: 1,500 kg, saw band length: 4,640 mm, saw band width: 34 mm, TECHNICAL DETAILS Saw type: Semi-automatic Orientation: Horizontal Miter cut: Yes Sawing capacity (round stock): 360 mm Saw blade length: 4,640 mm Saw blade width: 34 mm Saw blade thickness: 1.1 mm Gbedpfezrmniex Ahtsr MACHINE DETAILS Control: Teach-in Workpiece clamping: Hydraulic Power: 3.5 kW Shipping weight: 1,500 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: new, Year of construction: 2025, F 35 Type 3 - 1000 5.5 kW (7.5 HP), 3 speeds Gsdsxrc R Tepfx Ahtebr Motorized height and tilt adjustment Large safety guard Double roller carriage, 3,200 mm Scoring unit with LED lighting CNC rip fence, cutting width 1,000 mm Angle-mitre fence 3,450 mm, without length compensation Table extension/table width extension: With premium CDF surface The solution for precise and versatile tasks. This saw impresses with its single-sided tilting saw blade, ideal for precise cutting of wood-based panels, solid wood, and even wood-like profile materials. Its solid machine base, made of robust 10 and 5 mm steel sheets, ensures stability and durability. With the proven double roller carriage featuring the Altendorf system, and motorized adjustments for the saw unit's height and tilt, we set new standards in precision and handling. A particular highlight is the intuitively operated eye-level control panel (tiltable and swiveling), equipped with a touchscreen, making operation and monitoring a real pleasure. Technical features 15" touchscreen (19:6) Double roller carriage, 3,200 mm Electromotoric tilt and height adjustment 0 - 46° of the main saw blade, max. 154 mm Main drive with 3 speeds (3,000/4,000/5,000 rpm) Main saw blade diameter 300 - 450 mm Large safety guard Perfectly tailored for maximum flexibility and user comfort. The F 35 Type 3 is a flexible and convenient panel saw, ideally suited for modern businesses. With a motorized rip fence and optional DIGIT L or LD as well as interpolating axis movements, it offers high comfort and precision. A large modern display for controlling functions supports easy handling of this machine. The scoring unit, including LED lighting for the danger area and the optional RAPIDO system, ensures clean cutting results.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) Gbodpsxuqulofx Ahter - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Gbsdpjztvzhjfx Ahtor Technical data: - Workpiece length: 55–170 mm - Workpiece height: max. 27.5 mm - Workpiece width: max. 28 mm - Milling units: 2 - Cross-cut saw: 1

Condition: used, Year of construction: 2016, Schuco PDG E Cut 600 LE Profile Sawing Machine, Double Headed, Saw Blade Diameter 600mm (2800rpm), 6600mm Bed, 45, 90 & 135 deg Angle Head, Pneumatic Clamping, Min Cut Length 350, Max 6600mm, Machine Weight 2600kg. S/No. 319 C 1000138 (2016). Country of Origin: Italy Gjdpszqduqefx Ahtobr Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges.

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm With a cutter Gjdsulg Szepfx Ahtjbr

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes Gjdpoztr Rrjfx Ahtobr ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: good (used), Year of construction: 2001, machine/vehicle number: 6028, functionality: fully functional, input voltage: 400 V, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, length stop: 3,200 mm, table length: 3,200 mm, trimming length: 2,000 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Gbodpfx Ahsvl Icrotjr Power: 3/400V/50Hz Motor: 5.5 Kw Table 2000X400 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Technical data: Godpfxjzrvfwo Ahtebr - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Machine weight approx. 150 kg

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Gbedezrpl Dspfx Ahtjr Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, Trennjäger sharpening machine for sharpening small circular saw blades. Technical data: - Saw blade diameter: max. approx. 300 mm Gbjdozrx H Rjpfx Ahter

Condition: used, Weiss sharpening machine for sharpening small and medium-sized circular saw blades. Gbjdpfjzrx H Dox Ahtsr The machine is mounted on a workbench. Technical data: - Saw blade diameter: max. approx. 600 mm

Condition: used, Vollmer Junior B automatic band saw blade sharpener for sharpening band saw blades. Technical data: - Technical specifications: On request Gjdjzrx Hwspfx Ahtebr

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Gbedpfx Ajzquywjhtjr Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Gbsdpfoyi Uq Uox Ahtor Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) Gjdpfszr I E Ajx Ahtebr - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: repair required (used), Year of construction: 2001, machine/vehicle number: 794, functionality: limited functionality, Boring and sawing machine. From 2001 to 2011: operated in a three-shift system From 2011 onwards: operated in a two-shift system Gsdpfx Aezrl Eashtsbr Sawing machine: fully functional Boring machine: functional on 2 out of 3 axes Machine is currently running.

Condition: new, Electrical voltage: 400 / 440 V Gsdpfxod R Uzzj Ahtsbr Frequency: 50 / 60 Hz Number of phases: 3 / 3 phases

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS Godpszrk N Rofx Ahtsbr - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. Gbedpfxowd Ugte Ahtor LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).