Used New Brunswick Incubator Shaker for sale (18,964)

Condition: used, This listing is for a Eppendorf New Brunswick Innova 2300 Benchtop Open Air Shaker Fpsdexzg Izopfx Akhok For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study.

Condition: used, functionality: unexamined, input voltage: 220 V, Used New Brunswick Innova 4000 incubator shaker Fjdpfx Akey Nzp Eshopk Manufacturer: New Brunswick Model: Innova 4000 With sample holders

Condition: used, functionality: fully functional, New Brunswick Scientific G76 Water Bath Shaker. New Brunswick Scientific water bath shakers are equipped with a one-piece seamless water bath of deep-drawn stainless steel which is easy to keep clean. Model G76 is equipped with a triple-eccentric Gyrotory drive which is precision-machined and stabilized to rotate the shaker platform in a 13 mm diameter circular orbit. The gyrotory shaker is engineered to handle any workload from 25 mm test tubes to 1,000 mL flasks with equal ease. Features: Reliable, Sophisticated and Convenient Fpsdpfx Aeupvtiekhjk Platinum RTD Sensor Precise Temperature Feedback Regulation Triple-Eccentric Gyrotory Drive Good working condition. Please check out our other listings as well.

Condition: like new (used), Specifications INNOVA 4300 Platform Size (cm) 45.7 x 76.2 Maximum Capacity (250 ml flasks on universal platform) 30 Capacity & Largest Flask Size on Universal Platform 4 x 6L Orbit Diameter (cm) 2.54 Temperature Range (C°) A +5 to 60 Agitation (rpm) 25 to 500 Type/Application Floor Fpodpfx Akeinkf Djhek Refrigeration No Multi-Step Programming No Photosynthetic Lights No Gassing Manifold Optional Overall dimensions W x D x H (cm) 109 x 71.1 x 94 Weight (kg) 181 Good working condition. Please check out our other listings as well.

Condition: used, This listing is for the Sartorius Stedim Certomat BS-T Incubator Shaker. The unit is in full working condition and ready for immediate use This high-performance incubator shaker provides precise temperature control and uniform agitation for biological cultures. It features an intuitive digital interface and a durable, spacious chamber to accommodate various flask sizes, ensuring reliable and reproducible laboratory result Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Fjdpezltwkofx Akhepk Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for the Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator The unit is in full working condition and is ready for immediate use The MaxQ 8000 provides high-capacity orbital shaking with integrated temperature control. This unit is direct-from-lab surplus in original condition, ideal for growing cultures and general mixing applications while saving valuable floor space. Viewing is possible in Duxford by appointment Professional Asset Overview The Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator was acquired after decontamination as a surplus asset directly from a high-tier research facility. This unit is sold in its Original Lab State. We specialize in Direct Reuse, meaning we do not tamper with, refurbish, or alter the internal components of the machine. You receive the instrument exactly as it was decommissioned from the active research bench. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Fpjdsyv Ik Nspfx Akhjk Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..

Condition: used, This listing is for the This listing is for the Epindorf New Brunswick I/O Module The unit is in full working condition and is ready for immediate release The Eppendorf New Brunswick I/O Module is an analog input/output interface module designed to work with Eppendorf’s New Brunswick and bioprocess control systems. It provides a way to connect external sensors, actuators, and control devices to your laboratory process equipment to acquire analog signals and control external hardware. Analog Inputs & Outputs: The module accepts analog signals from external devices (such as sensors measuring temperature, flow, pH, etc.) and can output analog control signals to external actuators (like pumps or valves). Typical signal formats it supports include 0–5 V and 4–20 mA ranges, which are industry standards for process instrumentation OPC Server Interface: It can interface with OPC-compatible software such as Eppendorf’s BioCommand® SCADA for real-time monitoring and advanced control. OPC (OLE for Process Control) is a standard communication protocol that lets control software talk to instrumentation hardware. Fpodpfx Aexwc Hlekhok Process Integration: By connecting to process control systems, it helps in monitoring and controlling bioprocess parameters during fermentation, cell culture, or other controlled experiments How It’s Used Laboratory and bioprocess engineers use this module to: Integrate external sensors and actuators with New Brunswick or BioFlo systems. Capture analog data (such as voltage or current tied to physical parameters). Provide control signals to devices like external pumps or valves based on process logic. Link equipment to process automation software for data logging or control strategies. Eppendorf Typical Features Although detailed manufacturer technical specs are limited in published catalogs, typical features include: Configurable input/output ranges (e.g., 0–5 V and 4–20 mA). Eppendorf Compatibility with OPC communication standards for integration with software like BioCommand. Eppendorf Robust lab design to handle use in controlled environments. QuestPair

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. Fpedenzib Eopfx Akhek The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, DAWN DN Series (Single Spindle) Dawn Machinery Fjdpfx Akeubbp Sshspk Machine overview Suitable for grinding inside and outside diameters as well as the end surface of heavy or non circular work pieces. Heavier work pieces can be more easily loaded to the machine by overhead hoist Fully enclosed covers and oil mist reclaiming device prevent leakage of grinding oil and mist. Machine options Model DN-500 Specification Model DN-500 Grinding Diameter (Max) 610mm ø Swing (Max) 610mm ø Max work height 400mm Motor Power 18/23kW CNC Control System SIEMENS 828D

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Fedjnxk N Sopfx Akhjpk Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Fsdpenzkvhsfx Akhopk Maximum swing diameter 1000mm Maximum installed component height 800mm Maximum work table load 1200kg Email for latest factory build availability

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Fpodpfx Akjnzh Uijhsk Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: new, functionality: fully functional, The Robbi OMICRON 32 CNC Series was developed in response to need for medium-high production volumes. The machine can be equipped with automatic measurement devices to process complex components and is equipped with the latest-generation of SIEMENS 840D sl control system. Machine Specifications CNC 3206 Maximum distance between centres 630mm Maximum grinding length 630mm Height of centres over table 160mm Swing over table 315mm CNC 3210 Fpodenzia Dopfx Akhjk Maximum distance between centres 1030mm Maximum grinding length 1030mm Height of centres over table 160mm Swing over table 315mm Machine is equipped with: CNC SIEMENS SINUMERIK 840D sl, PCU 50.3 Wheel head and table automatic electronic feeds controlled by brushless motors Incremental optic rule for micro positioning of wheelhead Table manual swivelling system for taper grinding with dial gauge Re-circulating ball screw with preloaded nut for wheelhead and table movement Anti-friction material on wheelhead guides Electric installation, in cooled cabinet Hydraulic unit for tailstock control Pneumatic unit Centralised lubrication Factory build machine

Condition: new, functionality: fully functional, Machine Specifications 600R T7 Maximum distance between centres 630mm Maximum grinding length 630mm Height of centres over table 160mm Swing over table 315mm 1000R T7 Maximum distance between centres 1030mm Maximum grinding length 1030mm Height of centres over table 160mm Swing over table 315mm Fodpfsnziciex Akhopk High positioning accuracy with the possibility to apply on request linear encoders on one or both axis. The Robbi Omicron T7 PLC is built around the SIEMENS operating system, and provides a CNC machine experience, controlled via the T7 PLC control. This provides the same performance available on the CNC plus the great versatility of the T versions, thanks to the: New software developed on the last SIEMENS CNC 840 D SL TP 700 comfort panel. The smart interface fully developed by ROBBI gives the possibility to program even multiple and complex components without the needs of CNC programming skills. The auto teach of the first diameter and all the table positions permits a quick pre-set of the component reducing the programming time. The auto compensation of the dressing wear permits to maintain sharp and stable the grinding wheel along the process. Factory build machine

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Fjdponzh T Nsfx Akhepk Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Fjdpfx Aksnzhtwjhspk Machine Specification EUROPA eturn VS390 Swing over bed 390mm Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Condition: new, functionality: fully functional, With a capacity from 1 to 25mm with a standard workrest or 25 to 40mm with a special workrest, and a servo controlled regulating wheel, the JHC 12S is the most compact centreless grinder in the range. A precision ground, the hydrostatic bearing assembly provides minimal friction and lateral displacement, along with extended wheel life under heavy grinding loads. The grinding wheel spindle runs on the hydrostatic bearings with an ultra-thin oil film between all touching surfaces. This provides a substantial reduction in wear and prolongs spindle trueness and longevity. The regulating wheel uses a Variable Speed Motor, controls the speed of the regulating wheel. Specification Europa Jainnher JHC 12S Standard work rest diameter 1 - 25mm Optional work rest diameter 25 - 40mm Grinding wheel size : diameter x width x hole 305 x 150 x 120mm Regulating wheel size : diameter x width x hole 205 x 150 x 90mm Grinding wheel speed 1900 rpm Regulating wheel speed 10 - 300 rpm (variable speed) Grinding wheel motor 7.5 hp Regulating wheel motor 2 HP Hydraulic pump motor 1 HP Coolant pump motor 1 / 8 hp Fpedpfx Ajnzhuxjkhjk Regulating wheel feed on handwheel 4mm (rev) 0.02mm(Gra) Table feed on handwheel 7mm (rev) 0.05mm(Gra) Table micro feed on handwheel 0.2mm(rev) 0.001mm(Gra) Dressing handwheel 1.25mm (rev) 0.01mm (Gra) Regulating wheel tilt angle + 5 Deg -3 Deg Regulating wheel swivel angle +/- 5 Deg Floor space (approx) 1750 x 1350 x 1400 mm Net weight (approx) 1600 kgs Europa Jainnher JHC 12S Centreless Grinding Machine Standard Equipment Grinding wheel and grinding wheel flange Regulating wheel and regulating wheel flange Flange extractor Diamond tool Thrufeed standard workrest and blade Infeed standard workrest and blade Levelling screw and plate Tool box and tools Thrufeed process gauge Thrufeed safety device Work lamp

Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK. With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide. The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm. Delta Rotary surface grinder Maximum grindable surface 400mm Ø Fpedpfx Akenziakjhek Distance between column and wheel axis 315mm Max. distance between magnetic table and wheel 205mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0,01mm Size of cup wheel 200 x 80 x 78mm Ø Size of abrasive segments 50 x 20 x 90mm Motor power of the wheel (4 HP)-3 kW RPM of the wheel (50 Hz) 2840rpm/min Electropump motor power (0,08 HP)-0,06 kW Mass of the machine 680kg Rotary table surface grinder Standard Equipment Low tension electric system (24V). Cooling system with electropump Wheel-holder flange and grinding wheel. Grinding wheel guard Table guard.- Stakes key Instruction book/testing certificate Two colour painting RAL 5018-7032, bicomponent multicoat of paint CE conformity certificate with respect to the Units Directive CEE 89/392 and subsequent modifications Stock machine complete with Automatic Downfeed control

Condition: new, functionality: fully functional, Topking X-25 CNC Cylindrical Grinding Machine Topking “The X-25 CNC cylindrical grinding machine is the perfect answer for UK manufacturers facing space constraints,” explains Simon Rood. “Unlike traditional T-type base designs, the X-Series utilises a revolutionary cross-slide structure. This design allows the X-25 to reduce floor space requirements by over 30% while significantly enhancing stability. It is a superior choice when space is limited, making it ideal for busy production environments where every square metre counts.” Machine overview INTRODUCTION Fjdpfx Aksubbqiohspk Compact CNC cylindrical grinding machine with an impressive capacity. The X series CNC cylindrical grinding machine integrates advanced design and innovative features, offering efficient, precise, and flexible machining solutions. This grinder can meet various processing needs and ensure high-quality results for small or large components. The X-axis and Z-axis of the X-series CNC cylindrical grinding machine adopt a cross-slide design, effectively reducing the footprint and axial travel, thereby saving production space. The high-rigidity machine body and the heavy-duty spindle and tailstock significantly increase the component load capacity. The high rigidity machine body ensures stability during grinding, providing high-quality machining results. The operating system is equipped with a high-performance CNC control system and a built-in graphical user interface (GUI), making setup easy and enabling users to operate with ease. The grinding applications are extensive, offering customers the most suitable machining solutions. Specification Swing (Max) 270mm Distance between centres 200mm Grinding Diameter (Max) 250mm Weight between centres (Max) 5kg CNC Control System FANUC or Mitsubishi CNC Controls

Condition: used, Year of construction: 2009, operating hours: 12,395 h, Equipment: all wheel drive, Internal vehicle number: G400017 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova New Holland E80 BMSR-2 Crawler Excavator | 8.6 t | Grab | 2 Digging Buckets For sale: a used New Holland E80 BMSR-2 crawler excavator, manufactured in 2009. The machine is equipped with a Lehnhoff MS08 quick coupler, a dozer blade, air conditioning, and a comprehensive range of attachments. The scope of delivery includes two digging buckets with cutting edges of 400 mm and 900 mm, as well as a 600 mm grab. Technical specifications: * Manufacturer/Model: New Holland E80 BMSR-2 * Machine type: Crawler excavator * Year of manufacture: 2009 * Operating hours: 12,395 hours * Engine: Isuzu * Engine power: 42 kW * Operating weight: 8,590 kg Fpodpfxjyvm Awj Akhjk * Product identification number: LF05-04329 * CE marking * Air conditioning * Dozer blade * Vehicle number: G400017 * Condition: Used * German machine Equipment and attachments: * Lehnhoff MS08 quick-coupler system * Digging bucket with 400 mm cutting edge * Digging bucket with 900 mm cutting edge * Grab, 600 mm * Dozer blade * Air conditioning Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale reserved. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, functionality: limited functionality, power: 87 kW (118.29 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 16,000 kg, Year of construction: 2007, operating hours: 11,500 h, Equipment: cabin, We are offering a New Holland MH CITY mobile excavator/loader with a split boom for sale. Registration number: 300/25. Defects: Oil leakage on the driveshaft, leaking swivel bearing, the electrical system is not fully functional, and the hydraulic quick coupler cannot be opened. Otherwise, the machine is roadworthy, and the engine and hydraulics are in good working order. Technical data: Engine: CNH 87 kW Operating hours: 11,xxx Year of manufacture: 2007 Weight: 16 t Equipment: Suspended seat, crane hook, hydraulic connections on the boom, manual engine speed control, radio, lighting, dozer blade. Accessories: Hydraulic quick coupler Digging bucket, 97 cm wide, 0.8 m³ volume Transport dimensions: Length: 7.6 m Width: 2 m Fsdsztvgdopfx Akhepk Height: 3 m Weight: 16 t Loading and transport to the destination are possible by arrangement. The stated price is exclusive of VAT.

Condition: used, Year of construction: 2009, operating hours: 11,707 h, Equipment: all wheel drive, Internal vehicle number: G300381 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova New Holland F106.6A 6x6 All-Wheel Drive Grader | Approx. 12 Tonnes | Year 2009 Used New Holland F106.6A motor grader, manufactured in 2009. The machine features 6x6 all-wheel drive and an operating weight of approximately 12 tonnes. The grader is ideal for road construction, surface levelling, earthmoving and maintenance work. Technical details: * Manufacturer/Model: New Holland F106.6A * Machine type: Motor grader * Year of manufacture: 2009 * Operating hours: 11,707 hours * Weight: 11,500 kg * Weight class: Approx. 12 tonnes * Drive system: 6x6 all-wheel drive * Environmental badge: None * Technical inspection: New * Vehicle number: G300381 * Condition: Used * German machine Inspection possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Note: The specifications list both 10,700 and 11,707 operating hours. The more precise value of 11,707 hours has been used for this description. Financing example: Fpjdpfxoxnulbs Akhsk * Internal number: G300381 * Purchase price: €53,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €839.80 * Residual value: €9,980.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Fjdezp E Dkspfx Akhjpk Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Universal Shaker accessory kit / adapter plates / expander plates Professional accessory kit for electrodynamic shakers and vibration test benches For sale is a comprehensive used accessory kit for electrodynamic shakers or vibration test benches. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, and additional adapter and clamping components for professional use in vibration and shock testing. These components are ideally suited for test specimen mounting, special fixtures, and custom adapter designs in the field of material testing, environmental simulation, and research and development. Technical data Manufacturer: unknown Type: Accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components Fsdezp D Tkspfx Akhopk • 1 expander plate, approx. 770 × 770 mm Weight: approx. 90 kg • 2 adapter plates, approx. 770 × 770 mm Weights: approx. 45 kg and approx. 40 kg • 1 adapter plate, approx. 770 × 770 mm Weight: approx. 35 kg • 1 adapter plate with circular cutouts Weight: approx. 25 kg • 1 round adapter plate Weight: approx. 20 kg • 1 clamping rail / linear adapter Weight: approx. 25 kg • 1 precision adapter block Weight: approx. 3.06 kg • 1 steel adapter plate Weight: approx. 2.18 kg • Additional adapter and fastening parts as shown in the images Features Solid aluminum constructions Reinforced expander plate with central mounting Precision-manufactured adapter plates Bore and thread grid for flexible test specimen mounting Adapter plates in various sizes Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional accessories as shown in the images Application areas Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Fatigue testing Automotive industry Aerospace Research and development Test specimen mounting and special constructions Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Condition Used. Optical condition as shown in the images. Normal wear and tear, scratches, and pressure marks present due to age. Some minor edge damage from previous use. Scope of delivery Complete accessory kit as shown in the images. Expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional adapter and fastening parts as shown in the images. Note: Only the accessories shown in the photos are being sold. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Fsdozpya Hopfx Akhopk Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.