Used Niko Pneumatische Presse for sale (12,355)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Fgodpszk Eqmjfx Aptjd Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Table size: 660 x 450 mm Stroke length: 520 mm Fgsdpfxsq U Rbfe Aptod

Condition: used, Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte  / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Presshöhe / Press high max. 350mm Fodex Rq Rujpfx Aptogd Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1989, machine/vehicle number: 00789901, This press line, featuring an ERFURT press, type: PKZZI 800.1/3150x1600/500E, as well as a roll feeder/material conveyor and straightening device, will be auctioned online as part of our industrial auction/machine auction – site closure of J&S GmbH Automotive Technology – presses and metalworking. Fsdpfx Apezk H Rnstogd You can find this and many other items on our platform.

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening Fedpfxew Aff De Aptjgd year 1992

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included Fedpfx Apjzb Il Notsgd

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ Fsdpey E Abnjfx Aptsgd 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: ready for operation (used), functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 650 kg, fuel type: gasoline, color: orange, fuel: super 95, Year of construction: 2009, operating hours: 1,123 h, Remote-controlled caterpillar mower: - Niko - Roboflail One - Year of manufacture 2009 - 1,123 operating hours - 650kg - 170cm x 180cm x 110cm (lxwxh) - max gradient: 70% - 2-sickle mower - 25hp Kawasaki engine - Radio remote control (range 300m) - Municipal machine from 1st hand Fgedpott N Ucjfx Aptsd Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: reconditioned (used), empty glas/jar cleaner Make: Niko Typ: 036/38 Diameter container: 60 - 165mm Hight container: 50-300 mm Capacity: 12.000 container/Hr Frame: Stainless steel 1.4301 (AISI 304) in/outfeed conveyor Hight: 900 mm + 50 mm Dimensions: L x W x H = ca. 4.400 x 1.450 x 2.300 mm Features: In/ outfeed conveyor option to clean with air or water Electric cabinet with Siemens S7 SPS and Siemens Touch-panel Fsdpfxjicnp Ro Aptsgd Safety housing as-is or tested and adjusted to customer needs

Condition: good (used), NICO Slicer / Long slicer / Slicing machine For cabbage, Ø800mm, Fgjdpsqx Sdyefx Aptjd Shred length : 67mm. Between knives : 2mm. Capacity approx. 4 tons/hour

Condition: ready for operation (used), Can diameter range: 52 mm – 99 mm Can height range: 50 mm – 140 mm Number of pockets: 15 Capacity: up to 200 cans per minute Fgedeyyq D Hspfx Aptsd

Condition: excellent (used), Year of construction: 2016, Specifications Manufacturer: IMV Model: DM125 Year: 2016 Condition: Used Stock number: 0396 Ram force: 1,250 t Number of press points: 2 Fgodpfx Apoyw Uf Aetjd Drive: Eccentric with stroke adjustment Ram stroke: 250–400 mm Strokes/min: 5–35 Vertical daylight below bolster, CBRA: 1,150 mm Table dimensions: 4,500 x 2,000 mm Ram dimensions: 4,500 x 2,000 mm Side column window: 2,600 mm Max. front column window: 4,900 mm Transfer cart: 2 units present Main motor power: 290 kW Press weight: 310,000 kg

Condition: reconditioned (used), Fortuna Roll Press/Dough Dividing Machine, Size 3, for dough pieces weighing from 35 to 85 grams. The machine has been refurbished and repainted. Equipped with 3 forming plates. Fjdpfxjc Utkas Aptegd 4x16 Ah connection. The machine is in excellent working order and can be put into operation immediately. If you have any further questions, please contact us. Thank you.

Year of construction: 2015, condition: ready for operation (used), Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/formats: 1l VdF/12-case/6-case KuKa, 0.75l VdF/12-case KuKa, 0.2l/30-case KuKa, 1l/12-case carton. Viewing possible by appointment. Fodpjx Aupvefx Aptsgd

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked chassis manufacturer: NIKO Max. speed: 4.8 km/h forwards, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW ≙ 10.36 HP Fodpfx Aox Edckjptogd (Separate) generator for power generation integrated into the chassis, making stand-alone operation possible even without the box body (decontamination module), 230/400 V power supply Generator manufacturer: GTS, 400/230 V, At 400 V = 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V = 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering Hydrostatic drive Electric starter Hand winch Headlights Folding driver’s platform Parking brake Chassis operating voltage: 24 V Decontamination module 4 (box body): Kärcher HY 10/8; equipment: TEP90, fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Box body can be tilted and removed using spring bolts and 380 V plug The vehicle was intended for the Bundeswehr to decontaminate vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip body, flatbed, etc. Operating hours as per display Vehicle preferably sold to commercial users or for export, private sale conditional. Sold without warranty. Net price for export Net: 6,800 EUR + (19% VAT) 1,292 EUR = Gross: 8,092 EUR The above information is non-binding; errors, changes, and prior sale reserved! Export license required. Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Crawler chassis manufacturer: NIKO Maximum speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW (approx. 10.36 HP) (Separate) generator for power supply, integrated into chassis, therefore can be used autonomously without superstructure (decontamination module); 230/400 V Generator manufacturer: GTS, 400/230 V At 400 V: 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V: 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for drive and steering Hydrostatic drive Electric starter Manual rope winch Headlights Folding driver platform Parking brake Operating voltage chassis: 24 V Decontamination module 4 (superstructure): Kärcher HY 10/8; Features: TEP90, fresh and wastewater tank, spray and suction pump, electric tank heater (water heating) Superstructure can be tilted and removed using spring bolts and 380 V connector The vehicle was intended for the Bundeswehr for decontaminating vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Fgjdjx Edcdepfx Aptjd Gross weight: 800 kg Superstructure weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip container, flatbed, … Operating hours as per display Vehicle preferably sold to businesses or for export, private buyers subject to conditions Sold without warranty Net price for export Net: 6,800 EURO + (19% VAT) 1,292 EURO = Gross: 8,092 EURO The above information is non-binding. Errors, changes and prior sale reserved! Export approval required Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked Undercarriage Manufacturer: NIKO Max. speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 Air-cooled Four-stroke Diesel Engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power supply, installed within the undercarriage, making autonomous operation possible even without the body structure (decontamination module); 230/400 V Generator Manufacturer: GTS, 400/230 V At 400 V: 6.4–8 kW; 11.6 A; 8 KVA At 230 V: 4–5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering movements Hydrostatic drive Electric starter Fgedpfx Aex Edb Hjptod Hand-operated cable winch Headlights Foldable driving platform Parking brake Operating voltage undercarriage: 24 V Decontamination Module 4 (enclosed body): Kärcher HY 10/8; Equipment: TEP90, Fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Body structure tiltable and removable by spring bolts and 380 V plug The vehicle was intended for the German Armed Forces (Bundeswehr) for decontaminating vehicle interiors. It was only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Additional attachments possible: stake body frame, tipper body, flatbed, etc. Indicated operating hours as per display. Vehicle preferably sold to businesses or for export; private sales subject to reservation. Sale without warranty. Net price for export: Net: €6,800 + (19% VAT) €1,292 = Gross: €8,092 The above information is non-binding. Errors, changes and prior sale reserved. Export license required. Tel: 08026/2188

Condition: used, Russian manufacturing, Max. pressing force: 25 t Fjdpexbf Sfjfx Aptogd Table size: 550 x 400 mm

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Fedpfx Ajzgf A Ujptegd Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0294898, functionality: fully functional, operating hours: 20,000 h, pressing force: 100 t, ram plate length: 3,300 mm, total length: 3,800 mm, total height: 2,500 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Stroke length: 3,300 mm Fgodpezhlntefx Aptsd MACHINE DETAILS Operating hours: approx. 20,000 h Dimensions & Weight Machine dimensions (L x W x H): 3,800 x 2,000 x 2,500 mm Machine weight: 8,000 kg EQUIPMENT Tools

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Fedszk E A Ajpfx Aptogd Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Fedpfx Aozk E Aceptegd Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, pressing force: 250 t, overall weight: 27,000 kg, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 250 tons Fgedpozk Ez Ejfx Apted Bending length: 3,550 mm Frame width: 3,050 mm MACHINE DETAILS Dimensions & Weight Footprint: approx. 4,500 x 2,000 x 3,400 mm Machine weight: approx. 27,000 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, overall weight: 16,000 kg, controller model: Cybelec DNC 800, working width: 3,000 mm, bending force (max.): 160 t, distance between stands: 2,650 mm, TECHNICAL DETAILS Fodpfx Aozk A Ivoptjgd Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Condition: used, Year of construction: 1986, functionality: fully functional, pressing force: 150 t, total length: 1,690 mm, total width: 1,440 mm, total height: 2,800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 150 t Oil volume: 480 l Aftertravel: 30 mm Safety distance: 180 mm Fodpfx Apozk A Ucjtjgd MACHINE DETAILS Total power requirement: 18.5 kW Dimensions & Weight Dimensions: 1440 x 1690 x 2800 mm Machine weight: approx. 4200 kg