Used Niko Vp11E Pneumatic Press (2008) for sale (19,328)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Hfodezk Eqmepfx Aqgsn Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Hfedsz Duhxjpfx Aqgen Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: good (used), Year of construction: 1995, The convenience of this tray ejector is that it pushes the plants (plugs) out of the tray. This makes it easier to pick up the plants during planting. Hedpfez Rdqwsx Aqgjfn Trays 24 x 17 = 408 holesManual operationRequires compressor More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the universal solution for every application. The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in both the textile industry and other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer of 1 to 240 seconds provide flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Hedpoziivqjfx Aqgjfn Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of supply: (See picture) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard Hodjyvh Rcepfx Aqgefn - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Condition: good (used), The convenience of this tray ejector is that it pushes the plants (plugs) out of the tray. Hodpfxsz Rdqqj Aqgjfn This makes it easier to pick up the plants during planting. Trays 21 x 12 = 252 holesManual operationRequires compressor More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), pressing force: 5 t, For sale: Schling DUO 5T pneumatic press. Hedpjz Sarhefx Aqgefn

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Crawler chassis manufacturer: NIKO Maximum speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW (approx. 10.36 HP) (Separate) generator for power supply, integrated into chassis, therefore can be used autonomously without superstructure (decontamination module); 230/400 V Generator manufacturer: GTS, 400/230 V At 400 V: 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V: 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for drive and steering Hydrostatic drive Electric starter Hjdpfx Aqox Edcdjgefn Manual rope winch Headlights Folding driver platform Parking brake Operating voltage chassis: 24 V Decontamination module 4 (superstructure): Kärcher HY 10/8; Features: TEP90, fresh and wastewater tank, spray and suction pump, electric tank heater (water heating) Superstructure can be tilted and removed using spring bolts and 380 V connector The vehicle was intended for the Bundeswehr for decontaminating vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Superstructure weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip container, flatbed, … Operating hours as per display Vehicle preferably sold to businesses or for export, private buyers subject to conditions Sold without warranty Net price for export Net: 6,800 EURO + (19% VAT) 1,292 EURO = Gross: 8,092 EURO The above information is non-binding. Errors, changes and prior sale reserved! Export approval required Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked Undercarriage Manufacturer: NIKO Max. speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 Air-cooled Four-stroke Diesel Engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power supply, installed within the undercarriage, making autonomous operation possible even without the body structure (decontamination module); 230/400 V Generator Manufacturer: GTS, 400/230 V At 400 V: 6.4–8 kW; 11.6 A; 8 KVA At 230 V: 4–5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering movements Hydrostatic drive Hfjdpex Edb Hofx Aqgen Electric starter Hand-operated cable winch Headlights Foldable driving platform Parking brake Operating voltage undercarriage: 24 V Decontamination Module 4 (enclosed body): Kärcher HY 10/8; Equipment: TEP90, Fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Body structure tiltable and removable by spring bolts and 380 V plug The vehicle was intended for the German Armed Forces (Bundeswehr) for decontaminating vehicle interiors. It was only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Additional attachments possible: stake body frame, tipper body, flatbed, etc. Indicated operating hours as per display. Vehicle preferably sold to businesses or for export; private sales subject to reservation. Sale without warranty. Net price for export: Net: €6,800 + (19% VAT) €1,292 = Gross: €8,092 The above information is non-binding. Errors, changes and prior sale reserved. Export license required. Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked chassis manufacturer: NIKO Max. speed: 4.8 km/h forwards, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power generation integrated into the chassis, making stand-alone operation possible even without the box body (decontamination module), 230/400 V power supply Generator manufacturer: GTS, 400/230 V, At 400 V = 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V = 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering Hydrostatic drive Electric starter Hand winch Headlights Folding driver’s platform Hedpjx Edckefx Aqgefn Parking brake Chassis operating voltage: 24 V Decontamination module 4 (box body): Kärcher HY 10/8; equipment: TEP90, fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Box body can be tilted and removed using spring bolts and 380 V plug The vehicle was intended for the Bundeswehr to decontaminate vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip body, flatbed, etc. Operating hours as per display Vehicle preferably sold to commercial users or for export, private sale conditional. Sold without warranty. Net price for export Net: 6,800 EUR + (19% VAT) 1,292 EUR = Gross: 8,092 EUR The above information is non-binding; errors, changes, and prior sale reserved! Export license required. Tel: 08026/2188

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Hfedpevbfbwefx Aqgjn Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. The set includes: • a pneumatic column press with a robust, steel construction • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides • a power cabinet, distribution board, and cable routing Hedpjz Sawdjfx Aqgjfn • a table on wheels with a transport brake Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Condition: used, Year of construction: 2016, Column press Tox 4 Mag 008.288 A.001, year 2016 Pressing force: 80 kN Total stroke: 180 mm Power stroke: 12 mm Hfjdpfx Aqoxuq Thegen Machine weight: 760 kg

Condition: used, Year of construction: 2016, Column press Tox 4 Mag 008.288 A.001, year 2016 Pressing force: 80 kN Total stroke: 180 mm Hfedpfx Asw D R I Teqgjn Power stroke: 12 mm Machine weight: 760 kg

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Presses are fully operational and in use. Hfodpfx Aqsy Avb Ajgon For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: used, This Gechter pneumatic press, type: 56 kN LP-ZS 4, will be auctioned off online as part of our industrial auction / machine auction BZB Behinderten-Zentrum-Boxdorf – including a metal circular saw, office furniture, and a three-wheeled tandem bike, as well as lighting fixtures. Hfedpez Sylmjfx Aqgjn You can find this and many other items on our platform.

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Hodpfx Asyzhqyeqgofn

Condition: ready for operation (used), Schmidt 32-151-01 Toggle press PressControl 60 Compressive force: 15 kN Stroke: 40mm Hjdpfx Aqoulf A Ejgofn Follow-up time: 0.07 sec Overtravel: 15mm PressControl 60 Two-hand operation You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Pressing force: 9 kN Overtravel: 15 mm Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm Hfjdpfsxxaz Aox Aqgen You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Hjdpoz Hv U Ssfx Aqgefn Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Overhang 130 mm Table 200 x 150 mm

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Hfsdpoy S A I Ujfx Aqgon

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumatic punching press HPA, 8 to 60 kN, available upon request. Direct-acting punching press with a pressing force of 17 kN. Pressing force 17 kN. Working stroke 40 mm. Hodjzn Nqfspfx Aqgsfn Overhang 100 mm. Table size W 300 x D 200 mm. Ram bore 20 mm. Weight 41 kg. Two-hand control panel. Two-hand operation: both buttons must be pressed simultaneously with both hands. Complies with the requirements of EN 574, Class IIIB 1. • Ram with anti-rotation feature. • Simple height adjustment of the press head via a threaded spindle and bevel gear. • Side-mounted measuring tape for quick reproduction of settings when changing tools. • Virtually maintenance-free, double-acting cylinder.

Condition: ready for operation (used), Burger D05 Pneumatic Press Weight: 230 kg Pressing force: 6000 kg Stroke: 39 mm Operating pressure: 6 bar Hfedpfx Ajz Hya Ejqgen You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and view our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), functionality: fully functional, Press No. 35 – 173 - 98 Year of manufacture 1998 Max. stroke 60 mm Pressing force 45 kN Hsdoz Hbb Djpfx Aqgofn Max. operating pressure 6 bar

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 880 kg, Specification: Protection rating: IP54 Control voltage: 24V DC Hsdpfx Aqjwq R Rhegofn Fuse: 16A Power: 0.5kW The hydropneumatic press with feeder from Tox Pressotechnik is a versatile and efficient solution for the precise and reliable processing of a wide range of materials. By combining hydraulic power and pneumatic control, it allows for uniform force transmission as well as fast and controlled operation. The integrated feeder ensures a smooth material flow, increasing productivity and optimizing the production process.