Used Niro Atomizer Kopenhagen F10 Abc06 for sale (474)

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Fedjzghflspfx Akmsgh

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h Fjdjxgg Hbjpfx Akmogh - Operating principle: MVR and TVR (hybrid)

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Fodew Ulc Eopfx Akmegh Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

Year of construction: 2022, condition: new, Niro-tech RX-150 single shaft paddle mixer This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm) Fgjdpfxohqnppo Akmjh More photos and full specifications: /

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Fedozcwnvepfx Akmsgh

Condition: used, Homogenizator tłokowy produkcji GEA Niro Soavi model NS3006H. Maksymalny przepływ do 50 l/godz. Maksymalne ciśnienie pracy do 1500 bar. Urządzenie jest wyposażone w pompę i lokalne sterowanie. Całość zamontowana na przejezdnej ramie ze stali kwasoodpornej. Fgodpozinb Ssfx Akmjh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 7,000 kg, operating pressure: 220 bar, pressure (max.): 220 bar, number of previous owners: 1, Equipment: documentation/manual, type plate available, Manufacturer: GEA / Niro Soavi Model: NS 5160 H Year of manufacture: 2004 Capacity: 10,000 - 20,000 l/h Max. operating pressure: 220 bar Number of pistons: 5 pistons Number of stages: 1 stage Including control cabinet (in excellent condition, recently renewed) Condition: very good Fgodevvmzzjpfx Akmjh

Condition: good (used), Year of construction: 2005, GEA Niro NS2006P piston homogeniser Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph Fsdpfxjw Ulcro Akmjgh

Condition: good (used), Year of construction: 1995, Niro-Fielder PP1 Processor - High-Shear Mixer Granulator The Equipment is in good condition and was in operation until 2017 when it was decommissioned due to production closure. Including: • 2 stainless steel mixing vessels (1 PTFE lined / jacketed) • Various accessories and spare parts Fodpfx Akepbb S Rjmogh • Documentation: Original manual with wiring diagram Physical inspection in the Basel area is possible upon request.

Condition: used, Used GEA Niro Soavi Type NS 3110 Stainless steel high-pressure homogenizer, sanitary design Fjdpfsxr Nybsx Akmogh Stages: 2 Capacity Min: 1,200 Max: 6,000 L/h Pressure: Up to 450 bar Motor power: 90 kW 380 V 50 Hz

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-850. Fedpfx Akjhr Rp Ijmjgh Capacity - 850 litres. Max product input - 425kg-700kg depending on product. Installed power - 10kW. Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Pneumatically emptying valve. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12-month warranty. Please allow a lead time of up to 8 weeks for the manufacture of this machine. Located in Poland. UK Food Machinery Ltd can organise transport of this equipment to your premises at a supplementary cost.

Condition: new, Year of construction: 2025, Niro-Tech WR 130 Grinder Fgedpfx Asxy Hivskmeh The WR-130 meat grinder is a versatile machine for small and medium-sized meat processing plants, designed for grinding and slicing fresh and chilled meat to specific textures. It also works well with other food ingredients in poultry, pet food, fish, delicatessen, and cheese processing plants. Manufacturer: Niro-Tech Model: WR 130 Year: New Power: 7,5kW / 400V / 50Hz Capacity: Up to 3.500 kg/h Daimeter of Throat: 130 mm Machine Dimensions LxWxH: 1.175x800x1.370 mm Machine Weight: 380 kg.

Condition: used, With 31 plastic plates and sealings, completted with fittings and displays 2 stainless steel end plates and manual pressing. Available approx. April 2018 Plates maximum: 60 Plate formats: 600x600 dimension ca. 270x80x150 cm Distance between first plate and spindle approx ca. 100cm Fedpez Ibrfsfx Akmogh

Year of construction: 2022, condition: new, 1 x Niro-Tech all stainless steel fresh meat grinder. Model - WR-130. Output capacity - Up to 3,500kg/h depending on product. Installed power - 9kW. Electrics - 400v, 50hz, 3 phase. Hopper size - 90 litres. Meat temperature - 0-4degC Comes with a set of 1 x grinder and 2 x cutting blades. Comes with a range of hole plates with 3mm, 5mm, 8mm, 10mm, 14mm and 20mm diameter. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6-8 weeks for the manufacture of this machine. Videos available on request. Fgodpfehq Rgdjx Akmoh

Year of construction: 2000, condition: excellent (used), Used high pressure homogenizer NS5160HA made by GEA Niro Soavi with an operating pressure of 700 bar and a throughput of 7.000 l/h. Sanitary version with five ceramic pistons, an operating temperature of 40°C and a maximum viscosity of 12.000 cP. Powered by an electric motor with 160 kW which needs three-phase current at 380 V and 50 Hz. The homogenizer was regularily checked and maintained and is fully functional. Fodpfehzcxrsx Akmsgh

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-400. Capacity - 400 litres. Max product input - 320kg. Installed power - 3kW. Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6 weeks for the manufacture of this machine. Fgsdpfohq Rgpox Akmeh

Condition: good (used), Technical data are shown on pictures. Fodpfx Akep N Aq Hjmegh

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Fgsdpfx Akoz Nx H Dsmjh Spindle motor: 6,9 kW Weight: 3,3 T Problem on CNC. Machine sold as it is. (Screen from CNC need to be changed)

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Model: AASContrAA700 Condition: Used Technical Data: 230V AC 50/60Hz 2100VA General: Fgsdpfx Akszh Iqwsmsh Optical System Reflection optics with protective coating and optical system with light-tight encapsulation Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Year of construction: 2023, condition: new, 1 x Niro-Tech vacuum tumbler / mixer with Micro-controller. Model - MS-700 V. Capacity - 700 litres. Max product input - Up to 420kg depending on product. Speed control - 1-9r./min. Installed power - 0.75kW. Vacuum pump power - 0.75kW. Efficiency of vacuum pump - 40m3/h Electrics - 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 10 weeks for the manufacture of this machine. Fsdpfohr Rprex Akmegh

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Fjdpfxezgg Sqo Akmsgh Technical data: Manufacturer: ATOM Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs.

Year of construction: 2022, condition: new, 1 x Niro-Tech MB2 boot-washer, brand new: Dimensions – 1260mm wide x 2000mm long x 1080mm high. Electricity – 400v, 50hz. colours. Manufactured in AISI 304 stainless. Fgedpfx Akohq Rd Ujmoh

Year of construction: 2022, condition: new, 1 x Niro-Tech SHM2 pass-through hygiene station, comprising of boot-wash, hand sanitising/disinfecting station and turnstile. The boot-wash features traditional rotating brushes which clean and disinfect work shoe / boot bottoms with automatic dispensation of disinfection / sanitising fluid. The hand-sanitising station automatically doses sanitising solution when hands are inserted in the specially designed sockets. Can be manufactured so as to run Right – Left or Left – Right depending on your factory requirements. Fgedpehr Rqlofx Akmoh Dimensions – 1620mm wide x 1080mm long x 1400mm high. Electricity – 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Brushes can be chosen in blue, red or white colours.

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Fgedpfx Akovwf Txemjh

Condition: used, Year of construction: 2007, Manufacturer IXION GmbH & Co. KG, Germany Model / Type TLF 1004 Machine type CNC deep drilling and milling machine Year 2007 Machine number 950-483 Axis Travels and Rotary Table Fjdoz Nyz Njpfx Akmsgh X-axis travel 2,000 mm Y-axis travel 800 mm Z-axis travel 2,000 mm B-axis rotary table 360 degrees