Used Nn 200 Liter for sale (22,621)

Condition: new, Year of construction: 2026, 200L cutter trolley, all stainless steel New item Fixed price: 330 euros each Currently 4 units in stock Subject to prior sale Sold without guarantee, no returns Gbedoyzrwqjpfx Aagon

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) Gedpfewc Rk Eox Aagobn The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Year of construction: 2002, condition: excellent (used), functionality: fully functional, MTV Förder PSB 29.1 MRD | Washing machine for meat processing carts, 200 l Manufacturer: MTV Förder- und Reinigungssysteme GmbH Model / Type: PSB 29.1 MRD Serial number: 0238123829 Year of manufacture: 2002 Purpose: Automatic washing of meat processing carts with a capacity of 200 liters Dimensions: 2900 × 1700 × 2400 mm Construction: Stainless steel (acid-resistant) The MTV Förder PSB 29.1 MRD is a highly efficient, industrial chamber washing machine designed for the automatic washing and disinfection of standard 200 l meat processing carts (so-called "cynbrów"). This unit is manufactured by a German company specializing in transport and hygiene systems. The machine is designed to maximize the saving of resources (water, energy, and chemicals) while maintaining the highest level of effectiveness in removing difficult organic contaminants, such as fats and protein residues. Gbjdpfx Ajy T Sumjagen Key features and functionalities: - Automated cycle (Rotating/lifting system): The design of the washing machine allows for easy loading of the cart, which, after the chamber door is closed, is automatically turned upside down. This ensures optimal access for the spray nozzles to the interior and excellent drainage of dirty water. - Advanced nozzle system: A system of high-performance, strategically positioned washing and rinsing nozzles guarantees thorough cleaning of every surface of the cart – including the wheels, handles, and chassis. - Industrial construction: The entire construction made of stainless steel guarantees full resistance to aggressive chemicals used in the food industry, long service life, and ease of maintaining the washing machine's cleanliness in accordance with HACCP and IFS standards. - Operational safety: The closed chamber prevents water-chemical aerosol and steam from escaping.

Condition: used, Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel Gsdpfxslw Az Us Aagsbn -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Condition: used, Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper Gjdpfx Aelyvc Ueagobn -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Condition: used, Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete Gedpfxjdtm Uks Aagobn -packed on: EURO pallet -Weight: 252 kg

Condition: like new (used), Pneumatic meat bin lift Godpfx Asinup Djagjbn Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Model: 200 liter Unloading height: 1.240 mm Capacity: 200 liter or 300 liter Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Condition: excellent (used), Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Gsdpfjqxavaox Aagsbn (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone. Gbedpfx Aoxdl Ixoagen

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Gedpfjwc R A Iox Aagobn Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Note: The IBC containers were filled with an acid for animal feed (main component: formic acid). Not classified as dangerous goods under ADR, but labeling is required according to the Hazardous Substances Ordinance. The containers have been emptied but not cleaned. Scope of delivery includes: 01x water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 liters incl. tap on metal, wooden or plastic pallet Your contacts at our company: Godpfx Asyligvjagsbn Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further transportation or shipment of this item will incur additional costs, which can be requested from us separately depending on place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x U- collision protection corner, used Material color: orange total height: approx. 350 mm total width: approx. 200 mm inside width: approx. 160 mm total depth: approx. 360 mm inside depth: approx. 240 mm leg dimension: approx. 140 x 140 mm foot plate dimension: approx. 340 x 200 x 8 mm material thickness: approx. 6,00 mm Gbedpfx Aask T Au Ejgjn Drill hole Ø: approx. 16 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 14,850 Kg General information about the article: This article is offered for pickup only. Any further transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Gbjdpfx Aajtu Truogon Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Gjdpetu T I Ujfx Aagebn Of course we also take care of all formalities Loading possible Request more information

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. Gbsdpfx Aemnqc Hoagsn We will, of course, handle all formalities Loading possible

Condition: ready for operation (used), Rexroth MSK100C-0200-NN-S1-AG2-NNNN servo motor MNR: R911309667 SN: MSK100-11852,used, good condition, 100% functional, scope of delivery as per photos Gsdpfjt Adpxsx Aagebn

Condition: ready for operation (used), Rexroth MSK100D-0200-NN-S1-AG0-NNNN servo motor MNR: R911309668 SN: MSK100-01874, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gedpfx Aot Adp Esagobn

Condition: ready for operation (used), Rexroth MSK100B-0200-NN-M1-AG2-NNNN 3~ permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 151 x 151 mm, Ø drive shaft: 32 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gedpfx Aoi D Nqqoagobn

Condition: ready for operation (used), Röhm ZFM - 200/3 = No.509-04 power chuck, with assembly tool and mounting screws, in original packaging, absolutely new condition Gbodoi Ec Dmepfx Aagjn

Condition: new, Rexroth MSK100C-0200-NN-M1-AG2-NNNN 3 Phase Synchronous PM motor MNR: R911315800 SN: 7260406032145, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gbodpjlx N T Tefx Aagen

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN NEXUS 200-II MSY Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control system Mazatrol Matrix 2 - Hydraulic HAINBUCH chuck, combination type, size 65 for main spindle - Hydraulic HAINBUCH chuck, combination type, size 65 for counter spindle - Tool Eye - C-axis - C-axis counter spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - MAYFRAN chip conveyor Gedpfx Aezczd Ueagsbn - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, overall weight: 18,000 kg, first registration: 09/2019, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, - Twin tyres - Mega, - 3 m internal height - side loading Gbedexxxltspfx Aagjn

Condition: excellent (used), mileage: 29,750 km, power: 162 kW (220.26 HP), first registration: 02/2002, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: red, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 6,930 mm, total width: 2,380 mm, total height: 3,100 mm, permissible axle load (axle 1): 4,450 kg, permissible axle load (axle 2): 8,500 kg, Year of construction: 2002, Equipment: ABS, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Air horn - Radio/CD player - Side door - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Tow hitch = Further Information = General Information Cab: double Technical Information Number of cylinders: 6 Axle Configuration Suspension: leaf suspension Front axle: Max. axle load: 4,450 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle: Twin tyres; Max. axle load: 8,500 kg; Tyre tread inside left: 90%; Tyre tread outside left: 90%; Tyre tread inside right: 90%; Tyre tread outside right: 90% Weights Unladen weight: 6,670 kg Payload: 5,320 kg Gross vehicle weight: 11,990 kg Condition Gbsdpfxsy U Hq Es Aagen Technical condition: very good Optical condition: very good Further Information Contact Andre, Henri, or Andre for more information.

Condition: good (used), liter capacity 1000 l range L-W-H 1460 x 1460 x 620 mm weight 180 kg External dimensions approx.: LxWxH 1460 x 1460 x 620 mm (height incl. 100 mm clearance height) Collection volume: approx. 1000 liters Net weight (painted) approx.: 180 kg Construction made of 3 mm sheet steel With galvanized grating (load capacity 1000 kg/m²) With support legs (100 mm clearance height) Transportable with pallet truck and forklift Gjdpfx Aoy Ty Areagobn Suitable for flammable liquids in GHS categories 1-3 and for water-polluting liquids in GHS categories 1-4

Year of construction: 2025, condition: used, New: Yes Gsdpfxju H Tnto Aagobn Empty weight: 785 kg Dimensions of cargo space: 231 x 119 x 151 cm Cargo space capacity: 2.200 l CE mark: yes Serial number: DPX-31023 Please contact Team DPX for more information