Used Nosotti T200/1500 for sale (4,563)

Condition: refurbished (used), Lathe for iron and metalworking Nosotti brand T200/1500 model Gedpfey D Sunox Almobl accessories how to take photo

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Gbedpfoy Rqhtex Almjl Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) Gbedsyga Utspfx Almol • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: excellent (used), For sale: High-end SIEMENS industrial electric motor – robust German engineering, designed for demanding applications. The motor is equipped with an encoder (2048 pulses) and a temperature sensor, allowing for precise control and operation monitoring. Visual condition is good with normal signs of use for industrial equipment. Technically, the motor is fully functional. Gbodpfxsyyppns Almsl ⚙️ Technical data Manufacturer: SIEMENS Model: 1PH7167-2NF03-0BJ0 Type: 3-phase electric motor Power: 37–45 kW (depending on voltage) Voltage: 350–459 V Current: 76–82 A Speed: 1500 / 1750 / 2000 rpm Duty: S1 (continuous) Protection rating: IP55 / IP54 Encoder: D01 2048 S/R Temperature sensor: KTY 84-130 Standard: EN 60034 Country of manufacture: Germany 📌 Additional information ✔ robust construction – SIEMENS industrial quality ✔ pulley installed ✔ complete wiring set + encoder ✔ ideal for CNC machines, production lines, industrial drives ⚠️ Condition / remarks Motor in good technical condition Normal signs of use are visible One mounting lug has a small crack (visible in the photo) – does not affect operation. 🚚 Shipping / collection Pallet shipping available Personal collection possible Assistance with transport organization provided

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) Godpfx Aeyzirxjlmsbl 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control Gbedpfoyupd Hex Almel - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: used, turning diameter 900 mm turning length 3100 mm swing diameter over bed slide 640 mm Turning diameter over crank 1100 mm spindle diameter 110 mm speed 7-800 (24x) workpiece weight . kg Holder Multifix ja total power requirement 10 kW 50 voltage 380 V Multi fix toolpost Rapid traverse 2-Axis D.R.O. 3-jaw chuck diameter: 400 mm Gbedpoyqu Enefx Almel 4-jaw chuck diameter: 800 mm Fixed steady rest diameter: 580 and 360 mm Following steady rest diameter: 230 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Gbedpfx Ajyb Rvkolmsl Very good technical condition. Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Siemens S7 control 3 molds included Price 195000euro Machine is located in Slovenia

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Gsdpod S S N Rsfx Almsbl

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices Gbsdjhzw Hijpfx Almel and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Control: CNC Drive: Hydraulic Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Gbsdpsy Hhwqsfx Almjl Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: used, Mało używane mieszadło ujednolicające ze stali kwasoodpornej produkcji Silverson model GX10/1500. Mieszadło posiada głowicę do ogólnych zastosowań. Napęd bezpośrednio silnikiem el. 7.5 kW, 1470 obr/min. W zestawie znajduje się przejezdna podstawa z hydraulicznym unoszeniem/opuszczaniem typ D/Lift produkcji Silverson. Gbedpfx Asy Inr Rjlmjl

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Y – 305mm Knee Travel: Z – 362mm 415V Electrics Gbedpfey N Ak Rex Almel Year 2014 Serial Number 103080 Stock Number 2867

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Dimensions (Estimate) Length 10000 mm Width 8000 mm Gbjdokvnnkepfx Almel Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Gbjdpoyhph Ejfx Almsl Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total height: 300 mm, total length: 3,980 mm, total width: 1,500 mm, Manufacturer: STOLLE Type: Cast Iron Specifications Gbjdpfswp Dbdex Almjl Metric US Standard Length: 3980 mm Width: 1500 mm Height: 300 mm Number of T-slots: 6 Spacing between T-slots / pitch: 250 mm T-slot size: 35 mm Weight per plate approx.: 4,700 ton Number of matching pieces: 2 Dimensions (Estimated) Length: 3980 mm Width: 1500 mm Height: 300 mm Weight: 4700 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent a representation or contract terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis 1607 mm Gbjdpfswaikxjx Almjl Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: good (used), total length: 4,700 mm, total width: 1,500 mm, plate height: 355 mm, Manufacturer: ASQUITH Type: SDT Year built: 1990 Specifications Metric US Standard Length: 4700 mm Width: 1500 mm Height: 355 mm Number of T-slots: 6 Distance T-slots / pitch: 250 mm T-slot size: 34 mm Number of matching pieces: 2 Dimensions (Estimated) Gedpfx Aowp Erwolmebl Length: 4700 mm Width: 1500 mm Height: 355 mm Weight: 5400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you will not find any representation or contractual conditions. We recommend that you check all important details.

Condition: good (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, Manufacturer: CME Model: MH-700 Control: HeidenHain TNC430 Gbedpjwpkq Eofx Almel Year of manufacture: 2004 Chip conveyor High pressure coolant 25 Bar ATC chain 60 positions Optional magnetic table clamping system Auto index head 1 deg. Specifications Metric US Standard X-axis 7000 mm Y-axis 1200 mm Z-axis 1500 mm Table length 8200 mm Table width 1050 mm Table load 25000 Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk Milling head auto-index 1 x 1 ° Dimensions (Estimated) Length 12500 mm Width 5000 mm Height 4000 mm Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contract terms. We recommend verifying all important details.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm T dimension: 22 mm Gbjdswp Dn Dspfx Almjl Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Gbsdpfxjv A Uw Do Almel Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,300 mm, travel distance Z-axis: 1,500 mm, Manufacturer: SORALUCE Type: FS 8000 Control: HeidenHain iTNC 530 Year of manufacture: 2006 ATC Chain 40 positions Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm Specifications Metric US Standard X-Axis 8000 mm Y-Axis 2800 mm Z-Axis 1500 mm Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk X - Axis feed 15000 mm/min. Y - Axis feed 15000 mm/min. Z - Axis feed 15000 mm/min. Gsdpfx Alsxc Emxemebl Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 17500 mm Width 4050 mm Height 5020 mm Weight 38400 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you check all important details.

Condition: good (used), Year of construction: 1980, 4-jaw chuck Length: 1500 mm Gbsdpfxowry Ixj Almol Width: 500 mm Height: 1500 mm Weight: 900 kg

Year of construction: 2020, condition: excellent (used), Köttermann Laboratory Fume Hood Type 2-401-GBAAAY Chemical Fume Hood / Fume Cupboard / Laboratory Workstation Industrial-grade version with base cabinet and safety cabinet Manufacturer: Köttermann Type: 2-401-GBAAAY Serial No.: 2-401-024880 Item No.: 2-401-1013076 Location: 44319 Dortmund Sales type: Ex works Special features: Loading possible at buyer’s expense For sale is a used Köttermann laboratory fume hood from an industrial site closure. The fume hood is ideally suited for chemical laboratories, research, quality assurance, analytical areas, and industrial laboratory applications. This is a robust industrial version with base cabinet, safety cabinet, glass sliding doors, and exhaust air connection. Technical data according to nameplate/images: Manufacturer: Köttermann Type: 2-401-GBAAAY Serial No.: 2-401-024880 Item No.: 2-401-1013076 Year of manufacture: 2020-5 Electrical data: Operating voltage: 230 / 400 V Current consumption: 16.0 A Frequency: 50 – 60 Hz Gedpjy Rz Hgsfx Almjbl Dimensions: Width: 1500 mm Depth: 900 mm Front height: 2300 / 2550 mm Cabinet height: 2300 mm Working height: 900 mm Usable space: Usable width with PP lining: 1390 mm Usable height: 1195 mm Usable depth with PP lining: 795 mm Airflow: Minimum permissible airflow: 830 m³/h Preset airflow: 900 m³/h Maximum permissible airflow: 1500 m³/h DGUV V3 tested as per inspection sticker Inspected in October 2024 Equipment: - Köttermann laboratory fume hood - Glass sliding doors - Interior lighting - Digital control panel / controller - Exhaust air connection / ducting - Base cabinet with safety cabinet - Media connections inside the workspace - Work surface with sink - Industrial-grade version Condition: Used equipment with age-related and usage-related signs of wear. Visual condition as shown in the pictures. The fume hood comes from ongoing laboratory operations. Scope of delivery: Köttermann laboratory fume hood as shown Base cabinet / safety cabinet Operating elements and internal fittings Scope of delivery strictly as depicted in the photos Notes: Viewing possible by prior appointment. Loading by arrangement, at buyer’s cost. Actual technical data, dimensions, and weights may vary. Information is given without guarantee. Commercial sale – sold as-is, without warranty. Subject to change, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake Lotze Model 327 x 1500 kN Year of manufacture: 1992 Gjdjy R N Tnspfx Almjbl Cybelec DNC 70 control Press force: 150 t Working length: 3500 mm CNC-controlled backgauge Throat depth: 300 mm Stroke: 300 mm Drive: 15 kW Complete set of top and bottom tools (prisms) Weight: 12 t Price: EUR 6,500 plus VAT ex location