Used Novus Airtower 20.000 Ec for sale (6,548)

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Dsdpfexxalnjx Abfeuu Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: ready for operation (used), Year of construction: 2018, Motor power: 15kW, AC, max. air flow rate: 21,000m³/h, max. vacuum pressure: 1900Pa, dust container capacity: 200l, disposal drum Hobbock discharge: 2x35l, weight: 1590kg, colour: RAL5012 front / RAL9006, first filtration stage main filter, cartridge filter area: 222m², W3 nanocoated cartridge filter area: 151.8m², bag filter area: 24.8m², number of cartridge filters: 6, number of bag filters: 4, cartridge dust class according to DIN EN 60335-2-69: M, separation efficiency greater than 99.6%, second filtration stage filter area: 65m², filter area: 8m², length: 1756mm, width: 2066mm, air inlet into housing: from the top, side panels: high-tech polycarbonate, with documentation. An on-site inspection is possible. Dsdpfx Aoza E Skjbfsuu

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Dsdpfx Ajyq Nl Nobfeuu Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: used, Year of construction: 2022, machine/vehicle number: 2022063, functionality: fully functional, operating hours: 1,577 h, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,600 mm, total length: 1,756 mm, total width: 2,066 mm, overall weight: 1,590 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Novus airtower filtering station with a capacity of 20,000 m³/h. Year of production: 2022. The device is still in operation and can be inspected in working condition. Dujdpfeyvpz Nex Abfju

Condition: new, Model Name Dedpegvqzcefx Abfouu Airtower FT 20.000

Condition: new, 400 V / 50 Hz < 75 dB(A) power capacity 15 kW volume capacity 20.000 m³/h weight 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN Duodpfeppgd Esx Abfju 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2.6 kW (3.54 HP), overall weight: 35 kg, type of input current: three-phase, input voltage: 400 V, volume flow: 6,630 m³/h, fuel type: electric, ebm-papst: K3G450-PW12-07 centrifugal fan, radial fan, air supply fan, exhaust fan, high-pressure fan The impeller, motor and electronics are optimally matched to each other, resulting in an overall efficiency of well over 60%. The external rotor GreenTech EC motor contributes significantly to this efficiency. NEW!!! in stock: 3 pieces Manufacturer: ebm-papst Type: K3G450-PW12-07 Duodsxt I Nkspfx Abfsu Year of manufacture: 2022 Speed: 2040 min⁻¹ (revolutions per minute)​ Air flow q V: 6630 m³/h Air pressure: mac 948 Pascal Place of origin: Germany​ Electrical parameters Power supply: 3 phases, 380-480V AC, 50/60Hz​ Current consumption: 4.1A / 400V​ Power: 2650W / 400V​ Other characteristics Efficiency: 70% (A, static)​ IP protection: IP55​ VSD (variable speed drive) integrated​ Ins.CI.F, AO, Electronically protected​ Standards: CE, EAC, UKCA, cRUus Dimensions Frame (height x width) 630 x 630 mm Impulse diameter: 450 mm Weight: 34.5 kg

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg Duodpfx Ajypv T Rjbfeu

Condition: used, Year of construction: 2018, operating hours: 7,453 h, Tracks, excavator Volvo EC 300 CL with GPS air conditioning quick coupler. only 7,453 operating hours very good condition Dodpfex Amvnsx Abfeuu

Condition: used, mileage: 20,000 km, power: 110 kW (149.56 HP), first registration: 05/1989, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2026, gearing type: mechanical, loading space width: 2,500 mm, loading space length: 3,720 mm, loading space height: 1,610 mm, Year of construction: 1989, total length: 5,950 mm, total width: 2,500 mm, total height: 2,950 mm, number of seats: 3, Equipment: all wheel drive, 1st hand – volunteer German fire brigade. Only 20,000 total kilometers, verifiable. In regular use as a hose truck (SW1000) until 2025. Now sold only due to internal restructuring within the fire department. TÜV inspection valid until December 2026 (inspected anew at 20,178 km, currently 20,350 km). No issues whatsoever. Extremely robust MAN-VW all-wheel drive chassis. Permanent 4x4. Leaf spring suspension. Single rear tires. Wheelbase: 3,100 mm. Original 7.49-ton 8.150 FAE model, complete with original registration documents and vehicle title, continuously registered as such until recently. Therefore, this fire truck can be driven directly with an old class 3 car driver’s license obtained before 1999. Unladen weight according to registration: 5,505 kg with the installed box body (body exterior dimensions: 3.72 m long / 2.49 m wide / 1.61 m pure box height plus roof structures). Based on experience, the bare chassis without the fire-fighting body weighs less than 4 tons. Therefore, highly attractive as a platform for building a robust expedition vehicle that, when ready for travel with practical equipment, realistically remains under the 7.49 t gross vehicle weight, perhaps even leaving some payload reserve. This example already features the newer 6-cylinder engine with 6,823 cc and 150 hp. 5-speed manual transmission with low-range and two locking differentials. 89 km/h top speed! Dsdpfx Aexp Tagjbfjuu Power steering. Tilting cab with roof hatch and 3 seats. Overall vehicle dimensions: 5.95 m long / 2.50 m wide / 2.95 m high. The roof is accessible via a ladder integrally mounted in the body. The special signaling system is still installed and functional. Tires: 10.00 R 20 (16 PR), in good condition. Two complete, good spare wheels are also available for this MAN-VW. Sale/transfer by arrangement. Small jaw-type trailer hitch, 2,000 kg max. braked trailer load or 1,500 kg unbraked. The MAN starts instantly and is ready to drive immediately. Thanks to many years of storage in a garage, this is a quality truck from a time when vehicles were still built with care. This offer is only valid for businesses or public authorities / emergency services. Subject to prior sale and errors. The stated purchase price is the final gross price = net price (differential taxation according to §25a German VAT law. Separate VAT cannot be itemized, nor will VAT be added to this purchase price).

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435793, used, normal signs of use, 100% functional, scope of delivery as per photos Duedpfx Asryiqfsbfeu

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-L3-NN-FW IndraDrive Cs compact inverter MNR: R911335595 SN:7260409116208, used, in good condition, 100% functional, scope of delivery as per photos. Duodpfsx Et Uxsx Abfju

Condition: new, systec P/N 8292 EC 3 three-axis system, serial no. as per photo, unused, 100% functional, scope of delivery as per photos Dujdpfx Aexah S Eebfju

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW MNR: R911344555 Indra Drive CS control Serial number: 7260409876457, used, minor signs of wear, 100% functional, scope of delivery as per photos Dsdpfx Abetvcukofeuu

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-S4-NN-FW IndraDrive Cs compact frequency converter MNR: R911340084 SN:7260408670599, used, in good condition, 100% functional, scope of delivery as shown in photos. Dedpjx Et U Esfx Abfsuu

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435789, used, normal signs of use, 100% functional, scope of delivery as per photos Dujdpfxoryiqbs Abfeu

Condition: ready for operation (used), maxon EC Motor 301782 Ø 30 mm 60 W with Hall sensors + Encoder MR, Type ML, 500 pulses, 3 channels, with line driver, 24V used, normal signs of use, 100% functional, scope of delivery as per photos Dodpfx Asi D I Itobfeuu

Condition: new, Rexroth CSH02.1B-CC-EC-ET-L3-NN-NN-FW MNR: R911340358 SN7260409845853, unused, 100% fully functional, scope of delivery as shown in the photos. Dodpfx Aex Dw Siobfsuu

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer Djdpfx Abszb H Shsfeuu X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Year of construction: 2025, condition: used, functionality: fully functional, PROBST Paving Cleaner EASYCLEAN EC-60 EASYCLEAN EC-60 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Dusdpoy A E N Ajfx Abfsu - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 3,300 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, Year of construction: 2010, operating hours: 3,000 h, * Volvo EC 180 CL * Crawler excavator Duedjydharopfx Abfsu * Year of manufacture: 2010 * Quick coupler * 3 buckets

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, FOR SALE HAAS EC-1600 Horizontal Machining Center Exceptional condition – Year 2022 – Available immediately This latest-generation machine is ideal for machining heavy and large-size workpieces. Commissioned in October 2022, it has seen very little use and has been meticulously maintained according to the manufacturer's standards. Duedpfeyzb S Djx Abfju Technical specifications: - Model: EC-1600 (Generation 10/2022) - Axis travels: X: 1,626 mm | Y: 1,270 mm | Z: 1,016 mm - Table dimensions: 1,626 mm x 914 mm - Maximum load capacity: 4,536 kg - Spindle: ISO 50 - Usage: 3,000 hours - Power supply: 440 V / 3 Phase / 50-60 Hz (35 Amps) The equipment is ready for shipment. I am at your disposal for any additional information or to coordinate transport logistics. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: like new (used), Year of construction: 2004, operating hours: 6,090 h, load capacity: 8,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 4,100 mm, Manufacturer + model: KALMAR ECE 80 - 6 Mast: 2F5750 ID: 24051.5020 Category: Used Mast: 2F5750 Forks: 2400 mm Lowered height: 4100 mm Lifting height: 5750 mm Capacity: 8000 kg Year: 2004 Operating hours: 6090 hrs Battery: 80 V / 1550 - NEW - Mfg. 09/2024 Options: - FULL cabin - LINDE steering - Duo pedal!!! Djdpozafu Sefx Abfjuu - Spreader / S.s. - Spotlight - Duplex FFL mast - Completely NEW -> FEM 4 A - FORKS

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 850 mm, construction height: 1,380 mm, operating hours: 2,298 h, fuel type: electric, mast type: simplex, Manufacturer & model: JUNGHEINRICH ECE 310 * EX * Atex - 3G / Zone 2 Mast: 1F850 ID: 23052.5935 d Mast: 1F850 Forks: 1150 mm Lowered height: 1380 mm Lifting height: 850 mm Capacity: 1000 kg Operating hours: 2298 Year: 2017 Battery: Completely NEW * 24v / 465Ah * Year 2026 Options: * EX * Atex - Jungheinrich !!! System REF = E211103 / 2017 Dujdszafnfopfx Abfju Gas = IIB Type = Cat 3G (approved for Zone 2) Temperature class = T3 (+5C-Ta-+40C) Also with pedestrian operation New battery

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 850 mm, construction height: 1,380 mm, operating hours: 712 h, fuel type: electric, Manufacturer + model: JUNGHEINRICH ECE 310 * EX * Atex Jungheinrich - 3G / Zone 2 Mast: 1F850 Duedpfezaflwjx Abfju ID: 22081.5936 Mast: 1F850 Forks: 1150 mm Lowered height: 1380 mm Lifting height: 850 mm Capacity: 1000 kg Year: 2017 Hours: 712 hours Battery: Completely NEW * 24v / 465ah * Year 2026 Options: * EX * ATEX - Jungheinrich !!!! System REF = E211104 / 2017 Gas = IIB Type = Cat 3G (For use in Zone 2) Temp class = T3 (+5C-Ta-+40C) Also equipped with walk-behind operation.