Used Oilseed Screw Press for sale (16,546)

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Lodpfexa Hy Uex Aa Rjrr Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Lredpjzt H Uxefx Aa Rsr Pressure: 3 tons Made in Germany.

Year of construction: 2006, condition: good (used), Oilseed screw press Farmet FS1000, 55kw long. In a good condition, complete, ready for loading. Capacity up to 1.400kg/h. Lredpfx Asxrc Ixsa Rer

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Lodozi A Iyspfx Aa Rjrr

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg Lodpfxoigwdws Aa Rerr

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Lredpfx Ajx Hyfyea Rsr Engine power: 11 kW

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Lredpjtxc Itofx Aa Rsr

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Lrodpfxsyy U Shs Aa Ror Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Lredpfx Aezu Aw Eea Rjr Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer.

Year of construction: 2007, condition: used, REINARTZ AP15 rapeseed press, 45kW engine, manufactured in 2007. Capacity: 1 ton/hour (8,000 tons per year). Lrsdpfozbyqwox Aa Rer We also have other related equipment for oil production.

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Ljdpfx Aov Td Erea Rjrr

Year of construction: 2021, condition: good (used), Styrofoam press / compact screw compactor for EPS (Styrofoam®) and XPS, EPS packaging or production waste, Heger – used: Price ex works: only €9,950 (net)! Manufacturer: Heger GmbH, Herrenberg Type: Tiger 130 T Year of manufacture: 2021 3x400V, former new price: EUR 15,000 Throughput 1) up to 15 kg/h Achievable compression 1) up to 250 kg/m³ Processable material densities up to 30 g/l Lsdpfxjzk Da He Aa Rerr Processable molded part height up to 300 mm Effective feed opening (W x D) 700 x 360 mm Block size 130 x 130 mm Installation dimensions (L x W x H) 2,824 x 440 x 1,602 mm Machine weight 310 kg Electrical connection power 1.5 kW Supply voltage (EU) 3 x 230 V 50 Hz 3 x 400 V 50 Hz Supply voltage (USA) 3 x 230 V 60 Hz 3 x 480 V 60 Hz CE marking Condition: good – very good, little use Available: immediately Location: 25813 Husum

Condition: used, Pressing screw REG-MAC Lodpfx Aoztmx Dea Rerr for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Lrjdpfxjym Axzo Aa Rer Maintenance carried out by Kaeser

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers Lodpfx Aozu Aibea Rerr - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Lredpfx Aowiwpusa Rjr

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank Lredpfx Aaszpxhis Rjr CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Ljdpfxevyq Rns Aa Rjrr Characteristics: Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar Lsdszrn Ahepfx Aa Rorr - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Lrjdpjwiwqfjfx Aa Rer

Condition: used, functionality: fully functional, Rotary Air Compressor, INGERSOLL RAND, Model C70018M3, capacity 1,916 ACFM, maximum pressure 90 PSI at 3,575 RPM, Serial No. C14064; equipped with a US MOTOR electric motor, Model 6315-J/C3, rated at 350 HP, 2,300 V, 3-phase, 80 A./Compresor rotativo, Marca INGERSOLL RAND, Modelo C70018M3, Cap. 1916 ACFM, Presión max. 90 PCI a 3575 rpm, Serie C14064; con motor maca US MOTOR, modelo 6315-J/C3, de 350 hp, voltaje 2300 a 3ph, 80 amps. Lsdpfx Aaszmn Rnj Rsrr

Condition: used, Year of construction: 2016, Rated power: 132.0 kW Engine speed: 1,492 rpm Maximum operating pressure: 8.5 bar Ambient temperature: 3-45 °C Operating hours (display): Approximately 64,834 hours / Load: Approximately 64,658 hours Ljdpezwgbaefx Aa Rorr

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete Lrjdpfxjyb Sdis Aa Rjr YOM 1991 Made in Germany Good working condition

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Lrodpfxeyxpz Uo Aa Rsr

Condition: excellent (used), very robust spindle press Pressing area: 40 x 50 cm Working height: approx. 50 cm Made of cast iron Ledjzmytuspfx Aa Rsrr 80 kg