Used Okuma Lb15 for sale (250)

Condition: repair required (used), turning length: 400 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, General information about the machine We are offering a used lathe from the manufacturer Okuma. The machine is offered as a spare parts carrier. The machine is running but not all functions can be guaranteed. The keys for operation are missing. The machine is in our warehouse and can be inspected under power Technical data Nedjugmzkjpfx Ag Dowf - CNC control: OSP 5000L-G CNC system (German) - Tool turret: 12 positions - Lathe chuck: 250 mm - Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW - continuous operation) - Spindle bore diameter: 75 mm - X-axis travel: 400 x 0.001 mm - Z-axis travel: 500 x 0.001 mm - Cutting speed XZ: 0.01-1000 mm / U - Rapid traverse up to: 12,000 mm / min. - Power supply: 380V - Rated power of the machine: 21 kVA - Maximum load current: 36A - Machine dimensions (width x depth x height): 3.9 m (with chip conveyor) x 1.8 x 1.8 m - Machine weight: 4500 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. Njdsyw Hniepfx Ag Djwf The machine is still in operation and can therefore be inspected and tested on site. Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1989, Maximum swing over bed: 400 mm, over carriage: 250 mm. | Maximum turning length: 500 mm. | Spindle speed: 75 / 4,200 rpm | Power: 11 / 7.5 kW | Spindle bore diameter: 56 mm | Approximate total weight: 4,500 kg. Nsdpfx Ageyl Uqaj Dswf

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA Nwedpfsyy Upasx Ag Dof – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: good (used), Parts shown by hand not come. Nwjdpfxsyb R Erj Ag Dof

Condition: ready for operation (used), Year of construction: 1997, spindle speed (max.): 6,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 240 mm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details. • Turret positions: 12 • Driven tools: Yes (5 front + 2 radial) Nedpfx Aoywu Sieg Djwf • Tailstock: available (to be enabled) • Distance between centers: 500–1000 mm • Spindle nose: JIS A2-6 Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Nedswmdv Nepfx Ag Dswf

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Nwsdpjyf Ncqofx Ag Dsf Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 126937, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 32, controller manufacturer: Okuma, controller model: P200M-H, rotary table diameter: 400 mm, OKUMA MU-400VA 5-AXIS CNC VERTICAL MACHINING CENTER, FROM AEROSPACE COMPANY, 16" ROTARY PLATEN, 4TH AND 5TH AXIS BUILD IN TRUNION, 15,000 RPM 32 POSITION TOOL CHANGER, OSP P200M-H CNC CONTROL Okuma MU400VA CNC Vertical Machining Centre (2007) Description: Control OSP P200 Table working surface - 15.75", Max table load - 600lbs, X Axis travel - 30", Y Axis travel - 18.11", Z Axis travel - 18.11", A Axis trunnion tilt - +20 to -110deg, B Axis table rotation - 360deg, Table surface to spindle nose - 3.94" - 22.05", Rapids X & Y - 15.75 IPM, Spindle taper - CAT 40, Spindle speeds - 16000 RPM, Spindle Motor - 20HP, Tool magazine capacity - 32 Table Size 15.75" Dia Table Load Capacity 660 LBS # Axis 5 X-Axis (Longitudinal Travel) 30" Y-Axis (Cross Travel) 18.11" Z-Axis (Vertical Travel) 18.11" A-Axis (Trunnion Tilt Range) (±25°) +20° to -110° C-Axis Table Rotation Positioning 360,000° Max/Min Clearance Table Top to Spindle Nose 22.05" / 3.94" Distance Floor to Table Top 41.34" Rapid Traverse Rate (X, Y, & Z Axis) 1,574 IPM Spindle Horsepower 20 HP Max Spindle Speed 15,000 RPM Spindle Taper MAS BT40 Big plus Coolant Thru Spindle yes Nsdpfeu Illaex Ag Dewf Automatic Tool Changer Capacity (ATC) 32 Electrics 220/3/60 Approximate Machine Dimensions 114" x 160" Approximate Machine Height 116" Approximate Machine Weight 17,000 LBS OKUMA OSP P200M-H CNC CONTROL BUILT IN 4TH AND 5TH AXIS 16" DIAMETER TRUNION TABLE 15,000 RPM SPINDLE LASER TOOL SETTER 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE CHIP CONVEYOR

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Njdertrlzjpfx Ag Djwf Pendant Controller Chip Auger Stack Light

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Nwjdpey Drunofx Ag Def Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 490 mm, turning diameter: 370 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 490 mm, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,745 mm, total length: 2,200 mm, total width: 1,720 mm, overall weight: 4,200 kg, spindle nose: JIS A2-6" (DIN 55021-6), Equipment: rotational speed infinitely variable, The machine is still in good condition and comes very well equipped with tooling! Additional options & accessories: - Super-precision version with Turcite on the guideways of both axes, minimum input is 0.0001 mm in diameter and length. Nwodpjy Eywtjfx Ag Dsf - Tool measuring arm - A large amount of tooling such as turning tools, 3-jaw chucks, soft jaws, etc. Weight & dimensions: approx. 4,200 kg 2,200 x 1,720 x 1,745 mm (LxWxH)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Nwodpfx Agey Ewy So Def Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: Nsdoyvfhdopfx Ag Dswf - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Nwodpfxoh D Anao Ag Dsf Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Nwedeyfht Uepfx Ag Djf Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed Njdpfx Agoyt Nvto Dewf - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Njdpfex D S Ekex Ag Dowf • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES Nwodpfx Ajy Er Hyeg Dof - Travels on X/Y/Z axes : 1250 / 660 / 540 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 32 [mm/min] - Cutting feed rates (X/Y/Z) : 32 [m/min] A ROTARY AXIS - Travel : [°] - C ROTARY AXIS - Speed : 1000 [rpm] - Travel : 360 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TABLE - Maximum workpiece diameter : 730 x 500 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 127 - 660 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.940 x 3.367 [mm] - Machine height : 3.541 [mm] - Machine weight : 13.000 [kg] MACHINE HOURS - Number of hours under power : 57.114 [h] - Number of working hours : 23.087 [h] EQUIPMENT - CNC : OSP-P200M - Turning option - Coolant tank * with paper filtering unit - Coolant through spindle - Chips conveyor - Oil mist extractor : LOSMA - Spindle cooling unit - Tool probe : RENISHAW TS27R - Workpiece probe : RENISHAW OMP60

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Nwedpfsy Ed Ayox Ag Def Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) Njdjyr Id Hspfx Ag Dowf - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment valued at €20,000–24,000. * 4-axis machine. * Fully independent programmable tailstock with movement on the Z axis and clamping by M codes. * 12-station turret, all positions powered. * C axis. * Y axis. * Integrated main spindle motor: 18.5 / 22 kW. * Driven tool motor: 5.5 kW. * Motor starting torque: 620 Nm. * Integrated, beltless main spindle drive. * Main spindle nose size: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Maximum swing diameter: 520 mm. * Maximum machining diameter: 380 mm. * Maximum machining length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption display. * Parametric automatic anti-collision system for tools. Nwedpey A D Rlofx Ag Dsf * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min in X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setting arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for main chuck and tailstock open/close. * Side-mounted chip conveyor, hinge-type. * Complete set of external and internal static toolholders. * Full set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operating manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless already sold.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Control system OKUMA OSP P200L • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 stations • Number of revolvers 2 • Tool holder BMT 60 • Number of tools 24 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Y-axis travel mm • X-axis travel 200 mm • Z-axis travel 1000 mm • Hydraulic clamping Y-axis • Sub-spindle with W-axis • Spindle configuration twin spindle • Main spindle bore 110 mm • Spindle bore approx. 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 4200 rpm • Main spindle drive VAC 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 360 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar Nwedpfxsy Ddtvj Ag Dsf • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mmMachine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight approx. 6100 kg • Maintenance contract yes • Utilization 60% Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Nodpfx Asy Ddiwsg Djwf Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus Nwjdpfx Agsy Dc Nij Dof • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50