Used Oleotecnica Co 3000 3/4 for sale (103,003)

Condition: excellent (used), functionality: fully functional, control type: NC control, actuation type: hydraulic, controller manufacturer: ESA, working width: 3,050 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, type of input current: three-phase, Equipment: emergency stop, finger protection, foot remote control, type plate available, OLEOTECNICA hydraulic guillotine shear Working cutting length: 3050 mm Maximum cutting thickness: 4 mm ESA programmer for dimension display Motorized backgauge Safety guards. Kodpfx Aoyqwhfenwsdn

Condition: used, mileage: 190,736 km, power: 132 kW (179.47 HP), first registration: 01/2007, fuel type: diesel, overall weight: 7,490 kg, tire size: 9.5R17.5, axle configuration: 4x2, wheelbase: 3,050 mm, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 3, Equipment: ABS, cabin, low noise, trailer coupling, Vehicle location: Bovenden, Kz. Haus, 1x air seat, double bench seat, rear window, heated mirrors, sun visor, compressed air horn, switch 6, ABS (anti-lock braking system), leaf suspension, air+light trailer hitch, low-noise G1, green environmental sticker Wheelbase: 3050 mm Body: Falcom FAW 3000 - CE body, lifting gantry 3 tons, on request also as Doka see -16165-! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kdjdpfsvhhwbjx Anwjn - .

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. Kdjdpfxonfvx Ne Anwen With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, mileage: 451,564 km, power: 206 kW (280.08 HP), first registration: 12/2009, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 4,150 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro4, suspension: steel-air, loading space volume: 13 m³, Year of construction: 2009, Equipment: electric window regulation, Applicable material: Fuel Tyre size: 315/70R22,5 Front axle: Suspension: leaf suspension Kdedpfx Anjwc Eabjwjn Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.120 kg Carrying capacity: 10.870 kg GVW: 17.990 kg Number of compartments: 4

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Kdsdpsfi Tg Hofx Anwsn Total installed motor power Kw 30

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Kjdpfxex R Uzdo Anwjdn Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2005, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 3,020 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 445/45 R19.5, tire condition: 30 %, wheelbase: 9,010 mm, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = Kdsdpfx Aezd R Dlenwen - Air Suspension - Disc brakes = More information = Axle configuration Tyre size: 445/45 R19.5 Make axles: SAF Tyre profile: 30% Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 8.340 kg Carrying capacity: 31.660 kg GVW: 40.000 kg Maintenance APK (MOT): tested until 01/2027 Identification Registration number: OR-51-PJ

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 6015400, functionality: fully functional, filter area: 340 m², empty load weight: 3,043 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kdodpfjzdz Unjx Anwon Number of filter bags: 200 pcs. Filter length: 2,600 mm Filter diameter: 200 mm Filter area: 340 m² MACHINE DETAILS Connection diameter: 750 mm Power of the main fan: 45 kW Weight: 3,043 kg Transport packages: 2 pcs. EQUIPMENT CE marking Control cabinet Number of connections: 1 pc. Main fan: 1 pc.

Condition: used, functionality: fully functional, machine/vehicle number: 100024953, Year of construction: 2001, operating hours: 4,455 h, load capacity: 2,500 kg, lifting height: 4,680 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,210 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: 100024953 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Kedpfxsy U R A Ee Anwjdn Condition: Ready for use and fully functional Technical condition: good Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Description: For sale is a Jungheinrich DFG 25 BS diesel forklift. The forklift is ready for use and fully functional. The visual condition is normal and the technical condition is good. The unit is available immediately. Fast and uncomplicated transport is possible upon agreement. Errors and prior sale are reserved. Sale is made without any warranty or guarantee. Fork, side shifter, 3rd valve, 4th valve, full cabin.

Condition: used, Year of construction: 1954, diameter 400 x 3.100 mm Kdodpfxo A Dkio Anwen

Condition: used, Year of construction: 1995, sheet width 3000 mm plate thickness 4 mm work height max. 900 mm 450 mm total power requirement 5,5 kW weight of the machine ca. 4800 kg Kjdoyk Diijpfx Anwjdn dimensions of the machine ca. 4250 x 1500 x 1850 mm Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions

Condition: used, mileage: 712,819 km, power: 309 kW (420.12 HP), first registration: 08/2008, fuel type: diesel, empty load weight: 9,175 kg, overall weight: 18,000 kg, axle configuration: 2 axles, color: brown, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, trailer coupling, Manufacturer: Scania - Type/Model: P420 - Outer shell: GRP (stainless steel inside) - 4 compartments (1956/1176/3000/3060) = 9,186 l tank capacity - Tank body: GRP INSULATED - First registration: 28/08/2008 - Mileage: 712,819 km - Number of axles: 2 - Emission class: Euro 5 - Cab: M - Transmission: manual gearbox - Suspension: leaf/air - Brakes: disc - Length: 8,010 mm - Width: 2,550 mm - Height: 3,030 mm - Unladen weight: 9,175 kg - Tank material: stainless steel - Total tank capacity: 9,186 l - Tank compartments: 4 - Insulated - System description: with outlets only Kjdpfxextuikj Anwsdn

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Kjdpswuligofx Anwedn Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: excellent (used), For sale: a Siemens servomotor. Used device, technically functional, in good visual condition. Normal signs of storage use are visible. Model: Siemens 1FK6063-6AF71-1GH0 Technical data: Torque M0: 5.4 Nm Current IN: 4.2 A Maximum speed: 6000 rpm Rated speed: 3000 rpm Voltage: 276 V Protection class: IP64 Brake: 24VDC 15.6W Kdjdpfsy Umttex Anwsn Encoder: A-32 Made in Germany Condition: used technically functional shaft rotates correctly complete, as shown in the pictures Ideal for: CNC machine tools industrial automation servo drives machine modernization

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request! Kedpfx Anszcpnzowedn

Condition: used, mileage: 59,768 km, power: 160 kW (217.54 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 8,230 kg, maximum load weight: 370 kg, overall weight: 8,600 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 4,220 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, cabin, cable winch, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, Vehicle location: Bovenden, registration as house, suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, 6-speed manual transmission, ABS (anti-lock braking system), constant throttle, PTO (power take-off), frame paneling, differential lock, fog lights, work lights, leaf-air suspension, air and electrical connections for trailer coupling, low-noise G1, underride protection, roof hatch, crane mounted centrally, emergency stop, foldable, 4-point hydraulic support, radio remote control, 3x hydraulic extensions, cable winch, green environmental badge. Kdjdjyrqrmepfx Anwon Wheelbase: 4220 mm. Body: Cormach mounting crane type 23000 Tech 36/3 (year 1997) with 4-way support & radio control (remote control). Rear axle differential lock, 4.1 t front axle, rear axle H2 6.2 t/7.2 t crown wheel 325, Telligent brake system with ABS, disc brakes on front and rear axle, front underrun protection, rear axle stabilizer for extreme high loads, PSM, pre-equipment for toll detection, distribution cockpit, pollen filter, on-board diagnostics 2, engine brake with constant throttle, engine start-stop system, Mercedes-Benz 60-2C MPA PTO with low-position N-speed. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: Kdedpfx Anezbtz Aewon - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized Kdedszbtxnjpfx Anwen - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : Ksdpfxszbqt Aj Anwedn 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Kdjdpfjzaq Ikjx Anwen Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: good (used), Technical data for the shelf rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelving rows: 01 pc Shelf length: 47,330 mm Number of bays per shelving row: 29 pcs Scope of delivery: 30x shelf upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. cross braces and base plates (upright frames are pre-assembled) 2,490 mm high Kdodpfx Aey Enpqenwsn 600 mm deep 174x shelves, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 696x shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 10x cross bracing, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg Material finish: sendzimir galvanized 01x load sign with information on bay and shelf loading, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery.

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination Kdjdpfxjc Ipcko Anwen → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Kjdpfec Ipc Uex Anwjdn Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm Kdjdpfx Aspbbc Honwsn - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics Kodowg R I Ejpfx Anwodn The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////