Used Om Ct 13 Hochhubwagen for sale (19,082)

Condition: good (used), machine/vehicle number: 15464, Year of construction: 1990, load capacity: 1,300 kg, lifting height: 2,600 mm, load center: 600 mm, fuel type: diesel, mast type: other, construction height: 1,870 mm, fork length: 1,150 mm, 4997093 Serial Number: 72790116121 Bodpjxz Sn Tjfx Ahmedh

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Bedpfx Ahszzxyiomjdh Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AB / 162765, overall weight: 1,410 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, We offer this used SCM COMPACT XL 4-side planer, year of construction 2004. Serial number: AB/162765 Year of manufacture: 2004 year Weight: 1.410 kg Nominal voltage: 400 V Phases: 3 Current: 33 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or need more information, feel free to send us a message or give us a call. Bsdpfx Ahjz Hacyjmodh

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 Bodpfxspa Rhbe Ahmsdh EC100/A03 Minmal mold height 320mm Maximum 730mm

Condition: like new (used), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, The temperature control unit from GWK is available for sale; it includes options such as stainless steel plate heat exchanger, manual filling, analog interface via HAN-7 plug, and device front prepared for a Powerlink interface (2 x M12 plugs). Operating temperature: max. 130°C Medium: heat transfer oil Heating capacity: 6 kW Bdsdexx R Rbjpfx Ahmsh Cooling capacity: 29 kW

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Bdsdpfxszmhbge Ahmoh Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Industrial flexographic printing Regular maintenance of anilox rollers

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5031183-000 104, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), - Briquetting press with a storage container for compressing textile fibers of various material qualities - Our area of application: textile scraps (dust) from the tearing process - Also suitable for compressing wood scraps - The system was in operation from 2015 to 2020 Bdedszcnvkopfx Ahmsh Technical data: - Briquetting press with a 3kW hydraulic drive - 1400 RPM - 400V, 50 Hz - Briquetting output, depending on the type of chips and moisture content, 80 - 100 kg/h - Complete with 125 liters of hydraulic oil – including oil cooler and base - Transport lines + supports - Pusher plate SB1 with discharge screw, hydraulics, and electrical control, size 2000 x 2000 mm - Screw motor: 1.5 kW, 34.9 RPM - Hydraulic unit: 0.55 kW - Accessories CE: EC Declaration of Conformity according to Machinery Directive 2006/42/EC Note: The system is located in Ulm and can only be inspected there.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Compact 1000 working range of 1,000 × 2,000 mm. Maximum metal length (working length): 2,000 mm Maximum steel/sheet thickness: 4.0 mm Bdedoz Hfmdepfx Ahmeh Maximum punching force of 280 kN. Maximum work piece up to 150 kg Maximum diameter of 105 mm.

Condition: used, Year of construction: 2006, 5 Positions Digital positioning Bdodpfx Ahoz Ha Dwjmjh Universal tree

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Bdsdpfx Ahoy Exdxsmsh Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Bdjdowmxh Tepfx Ahmjh

Condition: used, Year of construction: 2010, functionality: fully functional, Gietz FSA 870 Compact high speed foil stamping , embossing and die cutting machine Bjdpfx Asz Hw Tvehmodh Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Top FSA 870 Compact specification High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : non stop delivery Fully reconditioned by exclusive distributor for Gietz AG , Switzerland in UK

Condition: used, Harrison Alpha 1350XS CNC Toolroom Lathe (2010) Swing Over Bed 350 mm Swing Over Cross Slide 196 mm Swing in Gap 535 mm Distance Between Centres 650 mm Maximum Turning Diameter 350 mm Spindle Speed Range 1 – 3,500 rpm Fanuc Oi-TD CNC control Harrison Alpha conversational programming Fanuc Manual Guide i Full ISO G-code programming capability 2-axis CNC control (X and Z) Electronic handwheel operation Machine Weight Approx. 1,800 kg Machine Dimensions (L × W × H) 2,400 × 1,700 × 1,500 mm Bdedpfx Aezq Ddxshmjh

Condition: used, Year of construction: 2016, Roll production line, combination type WP Multimatic MUS Selecta Modular V60 Combination Bedpfx Ahoz A Ryzjmedh Year of manufacture: 2016 Condition: refurbished, immediately ready for use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS, 5-row 3/4/5-row combined roll production line for the production of shaped rolls and long rolls, sliced and unsliced Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6,000 pieces Proofing time: 12 min Dough sheeter for Kaiser rolls, braids, pressed rolls, etc. "Green operation" without proofing cabinet with direct depositing possible (e.g., for Berliner doughnuts) Output in "green operation", theoretically max. 10,000 pieces per hour Adjustable flour spreader Exhaust fan for correcting the proofing chamber climate Optional dryer and stiffening fan Programmable depositing

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) Bdedez Eimfjpfx Ahmoh • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09075101981004, input voltage: 380 V, type of input current: three-phase, total length: 28,000 mm, year of last overhaul: 2024, control voltage: 380 V, workpiece height (max.): 160 mm, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. The machine can be inspected and demonstrated in operation at our facility. Bdjdpfx Asz Armljhmeh Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 981001712, total length: 3,200 mm, total height: 1,950 mm, total width: 1,850 mm, type of input current: three-phase, product height (max.): 150 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 500 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 6 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 3,620 mm, passage height: 150 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, BVM Full-Seal Machine COMPACTA 6010 Fully automatic. Web feed with photoelectric sensor control Used machine, year of manufacture 1998; in operational condition Technical data: Transverse sealing: 620 mm Bjdpfxoz Dwmwo Ahmedh Web width: 560 mm Passage height: 150 mm Longitudinal sealing: continuously operating Film width: max: 800x800 mm, half-tube film Electrical connection: 400 VDS, 50 Hz with earth and neutral Connected load: approx. 3 kW Paint: RAL 5007 - brilliant blue Working height, standard: 850 +/- 50 mm Description: - Machine frame made of aluminum profiles, screwed together - Feed via conveyor belt in line - Infeed and outfeed conveyor belt speed, steplessly adjustable via frequency inverter - Triggering of the working cycle and positioning of the product via photoelectric sensor, optionally horizontal or vertical - Longitudinal sealing continuously via permanently heated sealing bar, pneumatically actuated with pneumatic clamping device - Film unwinding device with slip clutch and film tear control - Maintenance-free sealing system, permanently heated with integrated cut-off knife (without sealing tapes, separating wire and Teflon fabric) - Infeed conveyor belt can be extended for threading the film - Height adjustment of the sealing level on the transverse and longitudinal sealing via handwheel - Format height adjustment via handwheel - Format width adjustment via handwheel - Machine equipped with control panel and display for messages - Standard equipment includes freely programmable Siemens S 5 100 U control - Aluminum profile/Makrolon safety guard with safety switches

Condition: used, Year of construction: 2005, Koenig Combi line KCL/13 modular bun roll line for the production of high quality products: round, oval, , long rolled , flattened working width 800mm Konig Rex Futura II headmachine 3, 4 or 5 rows SK58 + SK70 weight range 35-135 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h Siemens Simatic controlling with touch panel pre-rolling unit pre-prover VG190 long roll unit RR800 setting unit AS800/1200 year of build 2005 pictures BEFORE reconditioning Bedpfx Ajzh Ncbehmedh

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Small parts support: yes Measuring system: scale Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Extraction diameter: 2x100 mm Bodpez Hp Edjfx Ahmjdh Storage location:

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick Bsdpfx Ahozzrwbsmjdh All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: excellent (used), Year of construction: 2021, Grader Bedpfx Aozzq Ifjhmedh Make: Marel Model: CG600 Compact Grader 2021 6 Station Little use.

Year of construction: 2020, condition: used, A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible. Bdedpfsz Agggsx Ahmeh

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Bjdpoztyzlofx Ahmsdh Machine type: Wet blasting system Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Year of manufacture: 2013 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, Controll : CC200 Clamping force: 260 t Screw dia: 40 mm Type: Multicomponent Drive: Hydraulic Rotary table Machine is including robot and conveyor belt Robot: ERC 23/1-F Bdodpjzu Smiefx Ahmjh machine is in excellent condition

Year of construction: 2017, condition: ready for operation (used), This Zoller smileCompact was manufactured in 2017. It features a measuring range of up to 350 mm in the Z-axis and up to 160 mm in the X-axis, with a maximum tool diameter of 320 mm. The machine includes an optical measuring system with a camera and comes with the ZOLLER software (pilotStarter) installed on a PC. If you are looking to get high-quality measuring capabilities, consider the Zoller smileCompact machine we have for sale. Contact us for further details. Bjdpfx Aoz D Tizjhmodh - machine type: Tool Presetter- Voltage: 100-120 V~ / 200-240 V~- Frequency: 50 / 60 Hz- Power: 600 VA- Weight: 165 kg- Pneumatic Supply: 6-8 bar / 80-110 PSI- Tool Holder: SK50- Additional Adapter: SK40 adapter included- Measuring Range Z-axis (Length): up to 350 mm- Measuring Range X-axis (Diameter): up to 160 mm- Maximum Tool Diameter: 320 mm- Measuring System: Optical measuring system with camera- Software: pilotStarter installed on PC- Scope of Delivery: ZOLLER smileCompact unit with base frame/stand, SK50 tool holder, SK40 adapter, PC with installed ZOLLER software (pilotStarter), monitor, printer, manuals / documentation Technical Specification Taper Size SK 50