Used Omg Omg for sale (113)

Condition: used, Year of construction: 2010, operating hours: 4,687 h, load capacity: 1,500 kg, lifting height: 3,150 mm, free lift: 1,550 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, fork length: 1,150 mm, drive type: Elektro, construction width: 900 mm, High-lift pallet truck Mast type: Duplex Battery voltage: 24V Battery capacity: 300Ah Battery manufacturer: IBV Battery year of manufacture: 2022 Ppedpfsyvl Eqox Al Ssr Initial lift, Swivel wheel 360100001 TVH 779374

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Ppedeyg Iydspfx Al Sjr Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may change with major fluctuations)

Condition: ready for operation (used), Year of construction: 2000, OMG screw press for ceramics with vacuum pump, screw diameters 200/300 mm. OMG EXTRUDER WITH SCREW DIAMETER 250/300 mm, complete with vacuum pump and electrical panel, second hand, in working condition. Ppjdpfx Aoxvdg Dsl Sjr

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Electric pallet truck from Italian manufacturer OMG Model: LOGOS AC Ppsdpfx Asxw Nv Tjl Sjr Year of manufacture: 2016 Lifting height: 4115 mm Nominal load capacity: 1200 kg The truck is in very good condition and has seen little use.

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic strip feed Podpfxeyxc Ale Al Sopr aggregate angle adjustment pneumatic spindle movement strip supports oscillating drill movement adjustment feed stroke adjustment 380V power supply

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic material feeding Ppsdpsyxcz Ujfx Al Sor unit angle regulation pneumatic movement of heads material support slot length regulation slot distance regulation

Condition: good (used), Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel Podpfxjd Al Hyo Al Sopr -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

Year of construction: 1993, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for pedestrian stacker make: OMG type 214EA -with: recording and drive -Dimensions: 270/350/H285 mm -Weight: 38 kg Ppsdpfx Ajd Al Hgjl Ser

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW Pjdpfed Al Hfsx Al Sopr -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Year of construction: 2000, condition: used, Foil wrapping machine OMG Autofard Psdpfx Aloku H Ais Sjpr Year: 2000 Description: - Straight infeed - Foil unit - Shrink tunnel Maximum speed 15 piles/products a minute

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Ppodpjxvxpgjfx Al Ssr Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Year of construction: 2002, condition: good (used), OMG pallet truck Type 320KN Year of build 2002 Including loading device Psdpfx Aeduw Ebsl Sjpr Load capacity: 2000 kg

Condition: ready for operation (used), To suit any saddle stitcher, Price £3,000  IN STOCK Ppedpfx Aeir E R Uol Ssr

Condition: reconditioned (used), Year of construction: 2001, DOUBLE lignum angle beveller OMG TR 2 DOUBLE lignum angle beveller Pjdpfx Alolhr Eze Sjpr Double angle beveller lignum Invincibile ok super 350 mm Used 2001 To do: Double sided lignum beveller Model: Invincible around super 350mm Description: DOUBLE miter saw, double miter saw, 2 x 350 mm miter saw blades, sliding, rated power 21 amps, 50 Hz, 3-phase rotation on the blades 3000 l/min. Year of manufacture 2001. Very good condition Year: 2001

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, DOUBLE GLASS BEADING SAW TRF 527 NC FP CA MM.4000 (according to nameplate) Double mitre saw for simultaneous cutting of two superimposed glass beads. Right saw unit is fixed; Adjustment of the left unit is based on the set cutting length, which can be read from a digital display. Units are equipped with supports that enable simultaneous cutting of 2 glass beads. For cutting larger cross-sections, the upper support can be removed. Ppedpfsy Er Ikox Al Sjr After the cutting process is completed, the pneumatic clamping cylinders automatically swivel to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measurement display • Pressure monitor • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release and motor protection switch • Pressure monitor • Tool kit • Safety covers with horizontal, swiveling clamping devices • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor output 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 4000 mm • Min. cutting length 158 mm • Weight approx. 290 kg • Space requirement (standard equipment) approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediate angles. Additional central support. 1 set of adjustments for rebated profiles 1 set of adjustments for rebated profiles according to drawing: - Adapter on the clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central piece. The sketch below (in green) shows a beveled presser following the inclined profile and pressing it against the (red) shim on the stop. Details provided without guarantee.

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Pedpjxnlgcsfx Al Sopr Storage location: Garbsen

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Pjdpfoyyyw Aox Al Sspr Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: like new (used), functionality: fully functional, MITRE SAW , orientable +/-45° model OMGA T50 350 with dust aspirator second hand machine working conditions : Excellent CE regulation : Yes with extractor cabinet ( dust aspirator ) with flat diagram extensions Technical data : volt. 380/50 engine power Hp 3 ( kw 2,2) blade diameter mm. 350 with 90° blade : max height cut mm. 110 width max. cut mm. 130 Pedpfxom Ak Elo Al Sjpr with 45° blade : max. height cut mm. 110 max. width cut mm. 92 machine weight kg. 90 extractor cabinet weight kg. 50

Condition: used, functionality: fully functional, saw blade diameter: 300 mm, total length: 405 mm, total width: 90 mm, total height: 125 mm, overall weight: 500 kg, OMGA TR2 Double Miter Saw for Wood and Aluminium – After Technical Overhaul, Ready for Operation Specification: • Condition: Used, after a comprehensive technical overhaul • Manufacturer: OMGA • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) • Pneumatic control of cutting heads • Max. cutting length: 320 cm • Min. cutting length: 15 cm • Max. cutting section: 85 x 140 mm (at right angle) • Max. blade diameter: 300 mm • Angle cutting range: from -45° to +45° (left/right) Podoy Dpxdepfx Al Sjpr • 3 operation modes • Vertical workpiece clamps • Weight: approx. 500 kg • Overall dimensions: 405 x 90 x 125 cm (L x W x H) Additional Information: • The machine is in good technical condition and ready for immediate use • The photos presented show the actual condition of the item for sale • It is possible to connect and test the machine on site • The auction price does not include VAT or transport costs Financing and Transport: • We organise transport using the MDD fleet, courier services or external carriers • We offer financial support in the form of leasing or lease loans

Condition: used, Year of construction: 1989, - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 106 - Max. cutting height [mm]: 80 - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 - Voltage [V]: 380 Financial information Ppsdpfxexaniwj Al Sjr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 6.719 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 7.13 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Ppjdoyna Aaopfx Al Ser Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, total length: 5,200 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 8.687 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Min. saw blade diameter [mm]: 350 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 6.53 Ppodpfx Aeyna Aysl Sor - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 5200mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg Ppsdpfjyy S Uaex Al Sjr - available immediately -

Condition: excellent (used), functionality: fully functional, OMGA Radial Arm Saw RN 450 Ppsdpsyzp Dnsfx Al Ssr Cutting width at 90° max: 450 mm Maximum cutting height: 80 mm Saw unit adjustable in two planes Saw blade speed: 3000 rpm Main motor power: 2.21 kW Blade diameter: 300 mm Power supply: 220V

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Pedpsyym Afofx Al Sspr Max cutting height: 110 mm Saw unit adjustable for angle in two planes Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit