Used Optimat Bizon 1 for sale (85,246)

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Ijdpfx Aez Nfb Ijpheih Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 4 nr

Condition: new, Year of construction: 2026, Maximum chipping diameter 100 mm Drive system PTO shaft with shear bolt protection Power range 18 – 50 HP Number of blades 4 + 1 (counter-blade) Iijdpsz I Sphsfx Aphsh Cutting blade dimensions 210 x 60 x 9 mm Counter-blade dimensions 197 x 70 x 9 mm Flywheel weight 55 kg Feeding system Manual Hopper dimensions 510 x 510 mm Discharge chute rotation range 360° Rotational speed 540 – 1000 rpm Weight 230 kg Shipping dimensions (L x W x H) 1070 x 830 x 1240 mm PTO drive – power transmitted directly from the tractor shaft ensures stable and trouble-free operation. Required tractor power – min. 18 HP – suitable for most popular agricultural tractor models. 4 cutting blades + 1 counter-blade – made of hardened tool steel and double-edged, ensuring high efficiency and a clean cut. Rotor back with ejection paddles – facilitates effective discharge of wood chips from the chipper. 360° rotating chip discharge chute – allows for convenient adjustment of the discharge direction. Protected bearings – resistant to dust and contaminants, ensuring a long service life. Folding hopper – facilitates machine transport and storage. Emergency stop switch – immediately stops the PTO drive, enhancing operator safety.

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm Iijdoxdl Rajpfx Apheh - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control Iisdpfx Apjy E Rt Ejhoh STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Price

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Iisdpfoi E Trpsx Apheh

Condition: used, Year of construction: 2006, Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. Dqlu3Z - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with Iijdpfx Asv Ecy Sspheh lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - 1 pc. of UNI-BLOWER on outfeet side - 2 pc. of LIROS/SEOT 09 anti static units on outfeed side ( top/bottum )

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-250-04-1744, functionality: fully functional, input voltage: 400 V, number of axes: 4, number of slots in tool magazine: 8, total length: 7,500 mm, total width: 4,600 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, For sale: Weeke Optimat BP 150, the largest model, a 4-axis, liquid-cooled machining center with 12 beams and two vacuum pumps, one of which has undergone a major overhaul. The machine is in continuous operation. The gross price includes 23% VAT. This is a reliable and durable machine; parts are readily available through the Hommag network and on the open market at very reasonable prices. I recently replaced the vertical drive shaft and other minor parts. It is a solid, heavy-duty, and rigid machine. The headstock covers are removed but are included as a complete set. The machine is still in continuous operation, working at 25% capacity. It has 12 vertical drilling units in the X-axis, 24 vertical drilling units in the Y-axis, and 12 horizontal drilling units. It also includes a grooving saw and a milling cutter. Two safety mats require repair or replacement. The price is 5,000 Euros, and loading onto a truck costs 890 Euros. Iijdpfx Aoz Tfiajpheh I am selling it because I am closing my business due to my age.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters Ijdpfxszmrw Sj Aphjih • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. Iedpfx Apjzr N E Djheih • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Iisdpfszr N H Usx Aphjh Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Iijdeq Ehpaopfx Aphoh Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 Iedpfx Ajzr Nurjphoih • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 160 mm, workpiece width (max.): 1,100 mm, Wide belt sanding machine Manufacturer: Bütfering Type: Optimat SWT 124 RK Year of manufacture: 2010 Compact wide belt sanding machine, originating from a parquet manufacturing facility. Suitable for sanding solid wood, frames, and glued wood panels, as well as MDF, chipboard, or plywood. Allows for 2 grit levels in a single pass. Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x Calibrating unit / steel contact roller, profiled, diameter 160 mm, approx. 15 kW 1x Combination unit (roller / sanding shoe), profiled and rubberized contact roller approx. 65 Shore, diameter 160 mm, pneumatic pressure bar, approx. 11 kW Feed speed, continuously adjustable, approx. 3 - 13 m/min., approx. 1.1 kW Sanding belt dimensions: 1120 x 1900 mm with belt blowing device Isdpjzznkkofx Aphoih Compressed air: 8 bar Extraction capacity: approx. 2900 m3/h Voltage: 400 V, 3 phases, 50 Hz, 63 A Total connected load: 28 kW Dimensions approx. 1700 x 1850 x 1900 mm (L x W x H) Weight approx. 1800 kg

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Iijdjzux R Iopfx Apheh Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. Iodpfjyh Hwusx Apheih - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel Iodpfx Apeym Nvtjheih CE certified The machine has been regularly maintained and is ready for operation.

Year of construction: 2006, condition: ready for operation (used), A Bütfering metal deburring machine is offered for sale. Maximum working width: 1350mm, feed speed: 20m/min, processing stages: 3, 1st processing stage: abrasive belt, 2nd processing stage: 2 rows of cup brushes, 3rd processing stage: polishing belt, minimum and maximum workpiece thickness: 0.5mm/100mm, maximum material thickness: 100mm. Including one damaged conveyor belt and abrasive belts. Machine dimensions: 2000mm/2050mm/3400mm, weight: approx. 6000kg. Inspection possible by appointment. Iiodpfxozl U I Dj Aphjh

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Iedjychqzspfx Aphjih Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 3050 mm Working area Y: 1300 mm 11 kW electro-spindle, with vibration sensor, HSK-F63 connection C-axis with interface for machining units/aggregates Interface prepared for FLEX-5 unit Vertical drilling bits: 13 Horizontal drilling bits: 4 Adjustable saw blade at 0°/90° 12-position disc tool changer EASY-EDGE gluing unit Sawing and cutting unit Combined edge milling and finishing unit Working table with 6 rails Control: Power Control with PC85 Software package for AV-PC Remote control Chip conveyor belt Vacuum pump Safety mats Protective nets The following components are included in the sale: Cutting unit, Edge milling unit, Gluing unit, Isdpoz Du T Usfx Aphsih 6 narrow suction cups, 6 large suction cups, 2 machine manuals, 3 CDs, including the WoodWOP CD.

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Iedpfju N T Ewsx Aphsih Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 1999, Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026. Iiodpsz Agfvefx Aphoh

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 0-250-05-2654, functionality: fully functional, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Iiedpfx Asx Sqm Sophjh Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in excellent condition and currently in daily production use (approximately 2–3 hours per day). It is being replaced with a newer, larger machine due to increased production capacity requirements. The machine is available immediately. Technical specifications and detailed data are shown in the attached photos. Worldwide shipping can be arranged for customers upon request. Iedeym Tc Repfx Aphjih

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, WE OFFER AN VERY NICE CONDITION MACHINE WEEKE OPTIMAT BP 140 MACHINE COMES FROM A FIRST OWNER AND ONLY ONE PERSON WORKING ALL TIME ON MACHINE. VERY GOOD CONDITION AND GOOD OPORTUNETEY TO BUY AN VERY NICE MACHINE. MACHINE IS READY TO WORK INCLUDES SAFETY CARPET Iiedevkklgopfx Aphjh VACUM PUMP DOCUMENTATION MACHINE IS READY TO WORK WE CAN SHIP MACHINE WORLDWIDE

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment Iiodpfx Ajzuhbiophsh • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line