Used Optimum L44 Cnc for sale (9,346)

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Hfedpfx Aeymkwrjkren Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Hjdpezxpkmjfx Akrsfn

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and Hodpfjwfdm Eex Akrefn variable machine table.

Condition: like new (used), Year of construction: 2015, Manufacturer: OPTIMUM Maschinen Germany GmbH Model: F 150 Machine type: 3-axis CNC machining center Serial number: 1521211505 Year of manufacture: 2015 Control: Siemens Sinumerik 828D Travel X/Y/Z axes: approx. 750 / 500 / 500 mm Tool holder: BT40 Hedpfx Aksy Ia Uwerefn Spindle power: 12 kW Spindle power S1: 9 kW Total power: 25 kW Power supply: 400 V / 50 Hz T-slot worktable: approx. 800 × 450 mm Equipment: Integrated automatic tool changer Integrated chip conveyor Machine weight: approx. 3,520 kg

Year of construction: 2009, condition: ready for operation (used), A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Hodpfxoyyplie Akrefn

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed Hfedpfx Aeymlhrjkrsn - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code Hodpfx Aewlqpyekrofn - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Hsdpfxjymk Uke Akrjfn Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Hjdpfx Aezi Er Ijkrsfn Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface Hodpjymkdxsfx Akrefn • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: good (used), Year of construction: 2002, functionality: fully functional, FULLY AUTOMATIC SAW WITH AUTOMATIC LOADING TECHNICAL DETAILS Specifications Hedpfjvk R S Hjx Akrjfn Manufacturer OMP Model 370 CM PP CNC Year 2002 Condition Used

Condition: as good as new (ex-display), Year of construction: 1999, functionality: fully functional, WE OFFER MIKRON CNC AN VERY EXCELLENT OPORTUNETEY TO BUY AN NEW CONDITION MACHINE Hjdpfx Aevnz Exekrsfn MACHINE IS BRAND NEW CONDITION- NEWER USED FOR ANY WORK.

Condition: good (used), functionality: limited functionality, Year of construction: 1990, WE OFFER AN GOOD CONDITION MACHINE HERBER 75 CNC YEAR: Not known MAX CAPACITY: 75 X 3mm MACHINE NEED BE PUT BACK ON POWER AND CHECKED OIL GASKET NEED BE CHANGED FROM THE OIL TANK . Hfedpfx Akevmtxzjrjn MACHINE WAS WORKING IN SAAB - SCANIA TRUCKS IN SWEEDEN

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life. • Machine base constructed from cast iron for high rigidity • Carousel-type tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier • Coolant system with 70-liter coolant tank • Tool change performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, high-precision milling table – large dimensions and precision ground finish • Generously dimensioned access doors minimize cleaning and maintenance time • LED machine light for complete illumination of the working area SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front USB port (IP65) • Serial RS232C interface • RJ45 Ethernet on rear panel User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability: • LED tool number display • MCP with rotary switch for feed and spindle override Complete package: • RJ45 Ethernet port • Prepared for remote maintenance • AST function; allows simple optimization for enhanced dynamic and accuracy requirements • Absolute encoder / no reference run necessary • Higher precision Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid traverse speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Distance vertical spindle – table, min.: 100 mm Distance vertical spindle – table, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 T-slot spacing: 50 mm Maximum load capacity: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant/Lubricant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X axis (automatic): 450 mm Y axis (automatic): 260 mm Z axis (automatic): 450 mm Max. spindle–column distance: 370 mm Vertical Spindle Hsdpfx Akeymkcujrofn Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation Drive motor power S1 (continuous duty): 3.7 kW Drive motor power S6-30% duty cycle: 5.5 kW Drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X axis S1: 6 Nm Y axis S1: 6 Nm Z axis S1: 11 Nm Tool Changer Design: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings Hfsdpfezi Evgsx Akrjn - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Description LVD PPI 55/25 CNC PRESS BRAKE Hfedpfxsvk Ncqo Akren Force 55 tons - bending length 2500 mm - CNC MNC 95/C - distance between frame 2050 mm - motor 10 HP - weight 4200 kg INCLUDED A LOT TOLIINGS Specifications Manufacturer LVD Model PPI55/25

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Hfodpfx Ajzt A H Rokrsn Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: excellent (used), 3-axis visualization Universal spatial head milling machine, “HURON” type, 360° orientation 3-axis visualization Vertical spindle power: 2.2 kW X-axis travel: 600 mm manual / 480 mm automatic Hedpfx Aowlgguekrefn Y-axis travel: 270 mm manual Z-axis travel: 380 mm manual / 340 mm automatic Feed rate: 24 – 402 mm/min Number of spindle speeds: 11 Spindle speed: 45 – 1600 rpm Dimensions: 1540 x 1355 x 1650 mm Weight: 1500 kg

Condition: new, Year of construction: 2026, Working area: X - 2100mm, Y - 3000mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 6 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker VTLF 2.250 vacuum pump Drive: Full Leadshine AC servo drives with 1500W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 30mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Hodozr D Nwepfx Akrofn Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Machine dimensions: 4835 x 2900 x 2205mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, spindle bore: 30 mm, spindle speed (min.): 40 rpm, travel distance X-axis: 145 mm, travel distance Z-axis: 465 mm, rotational speed (max.): 4,000 rpm, center width: 650 mm, center height: 150 mm, load capacity: 1,200 kg, throat depth: 4,000 mm, For sale is a nearly new CNC lathe from OPTIMUM, model OPTIturn L28HS. The machine is in excellent condition. It comes from a vocational training institute (BFI) and was used exclusively for training purposes (setup and program transfer). Technical specifications: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Centre height: 150 mm Centre distance: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mounting: ISO 702-1 No. 3, Form A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool changer: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Space requirements (L x W x H): 1,655 x 1,485 x 1,955 mm Note: Machine hours can be read on site if the necessary expertise is available. As the lathe was only used for training, a very low number of operating hours can be expected. Hfjdpfoy D Hkqox Akron Tools and tool holders are not included in the offer. Transport and loading can be organized throughout Europe at extra cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus Hfjdpozi Ex Uefx Akrsn · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: as good as new (ex-display), Year of construction: 2022, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes Hfjdpeynf Unjfx Akren • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Hfjdpfjzu T Smjx Akron Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley Hedpjymka Hefx Akrsfn - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Thread cutting | steel M42 Hedpoz Rlkxjfx Akrjfn Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Base dimensions 600 × 520 mm Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg