Used Orbital Shaker for sale (491)

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release Pgjdoxv A Nqopfx Alhsr The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​

Condition: used, This listing is for the Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator The unit is in full working condition and is ready for immediate use The MaxQ 8000 provides high-capacity orbital shaking with integrated temperature control. This unit is direct-from-lab surplus in original condition, ideal for growing cultures and general mixing applications while saving valuable floor space. Viewing is possible in Duxford by appointment Professional Asset Overview The Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator was acquired after decontamination as a surplus asset directly from a high-tier research facility. This unit is sold in its Original Lab State. We specialize in Direct Reuse, meaning we do not tamper with, refurbish, or alter the internal components of the machine. You receive the instrument exactly as it was decommissioned from the active research bench. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench Original • Power-On Test: Verified Pgodpfxjyv Ik Nj Alhsr • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..

Condition: used, This listing is for 1 of 2 IKA MS 3 Basic Orbital Shaker. Podpoxxz R Eofx Alhjgr The unit is in full working condition and is ready for immediate release. The IKA MS 3 Basic Orbital Shaker is an efficient and versatile laboratory device designed for a variety of shaking tasks involving small vessels and microtiter plates. Its compact design and robust features make it suitable for both routine laboratory applications and more specialized experiments. Key Features: Orbital Movement: The shaker operates with an orbital motion, characterized by a shaker diameter of 4.5 mm. This design allows for effective mixing of samples within a range of vessel types. Two Operating Modes: Mode A (Safe Mode): In this mode, the shaker detects the type of attachment being used and restricts the speed to a maximum of 1,300 rpm for non-standard attachments, ensuring safety and preventing damage to both samples and the device. Mode B: This mode does not feature attachment detection and allows for higher speeds up to 3,000 rpm, depending on the attachment and application requirements. Touch Operation: The standard attachment enables up to 3,000 rpm in touch mode, providing immediate mixing responses when needed. Stable Shaking: The shaker maintains stable operation across all speed settings, ensuring uniform mixing of solutions and samples without fluctuations that could impact experimental results. Durable Construction: Built with a robust zinc die-cast casing, the MS 3 B promises longevity and reliability in various laboratory environments. Permissible Shaking Weight: The machine can accommodate a maximum shaking weight (including attachments) of 0.5 kg, making it versatile for different laboratory setups. Key Specifications: Type of Movement: Orbital Shaker Diameter: 4.5 mm Permissible Shaking Weight (including attachments): 0.5 kg Operating Modes: Mode A: Safe mode with attachment detection Mode B: Without attachment detection Speed Range: 0 - 3,000 rpm (Limited to 1,300 rpm in Mode A with non-standard attachments)

Condition: used, functionality: fully functional, Ohaus SHHD2325AL Orbital Shaker Pgsdpfowb Igzsx Alhor OHAUS Heavy Duty Shakers are designed to handle a wide range of applications no matter how difficult the task. Powerful, convenient shakers provide consistent orbital shaking action. Capacity 22.7 kg Speed Range 25 rpm – 500 rpm Tray Size 45.7 cm x 61 cm (LxW) Control Analog Drive System Triple Eccentric; Brushless DC Motor Calibration Speed calibration Dimensions 61 cm x 14.9 cm x 67.8 cm (LxHxW) Net Weight 49 kg Orbit 1 in (25 mm) Power 230V, 2.5A, 50/60Hz Power Consumption 75 W Safety Certification CE; TUV Speed Accuracy ±1 rpm, Above 100 rpm ±1% of set speed Speed Range 25 rpm – 500 rpm Timer 1 minute – 120 minutes Tray Construction Aluminum Good working condition. Please check out our other listings as well.

Condition: good (used), Infinitely variable speed control from 0-300 rpm Digital display Orbital diameter 30 mm Ideal for vessels with a volume of more than 250 ml, e.g. round flasks, Erlenmeyer flasks, culture flasks and bottles Pgedpoylwnujfx Alhsr Ideal for biological and microbiological growth tests and for production of stock solutions Continuous operation (endless) even under extreme loads Timer function In good operating condition, images form part of the description. Specification: Amplitude: 30mm Speed max: 300rpm Load capacity: 15kg Dimensions: 51 x 59 x 12cm (w x d x h) Weight: 26kg Electric supply: 240V 50/60Hz

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Pgjdpozp E Dkefx Alhor Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Universal Shaker accessory kit / adapter plates / expander plates Professional accessory kit for electrodynamic shakers and vibration test benches For sale is a comprehensive used accessory kit for electrodynamic shakers or vibration test benches. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, and additional adapter and clamping components for professional use in vibration and shock testing. These components are ideally suited for test specimen mounting, special fixtures, and custom adapter designs in the field of material testing, environmental simulation, and research and development. Technical data Manufacturer: unknown Type: Accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components • 1 expander plate, approx. 770 × 770 mm Weight: approx. 90 kg • 2 adapter plates, approx. 770 × 770 mm Weights: approx. 45 kg and approx. 40 kg • 1 adapter plate, approx. 770 × 770 mm Weight: approx. 35 kg • 1 adapter plate with circular cutouts Weight: approx. 25 kg • 1 round adapter plate Weight: approx. 20 kg • 1 clamping rail / linear adapter Weight: approx. 25 kg • 1 precision adapter block Weight: approx. 3.06 kg • 1 steel adapter plate Weight: approx. 2.18 kg • Additional adapter and fastening parts as shown in the images Features Solid aluminum constructions Reinforced expander plate with central mounting Precision-manufactured adapter plates Bore and thread grid for flexible test specimen mounting Adapter plates in various sizes Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional accessories as shown in the images Application areas Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Fatigue testing Automotive industry Aerospace Research and development Test specimen mounting and special constructions Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Podpszp D Tkofx Alhjgr Condition Used. Optical condition as shown in the images. Normal wear and tear, scratches, and pressure marks present due to age. Some minor edge damage from previous use. Scope of delivery Complete accessory kit as shown in the images. Expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional adapter and fastening parts as shown in the images. Note: Only the accessories shown in the photos are being sold. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Pgedpfszpya Hjx Alhor Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Universal Shaker Angle Adapter / Adapter Devices For sale is a used accessory kit for an electrodynamic shaker or vibration test stand. The kit consists of various solid aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. The components are ideally suited for individual test specimen mounting, special designs, and use on vibration test stands and vibration testing systems. Technical data: Manufacturer: unknown Psdpozpx Ucofx Alhogr Type: Accessory kit for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners Equipment: Several solid angle adapters Adapter plates of various sizes Clamping and fastening devices Clamping blocks and adapter elements Fastening material and other accessories as shown in the pictures Solid aluminum construction Threaded holes and clearance holes Universally applicable Areas of application: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs Scope of supply: Complete accessory kit as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening material Other accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal signs of wear and tear, as well as scratches and indentations, are present. Transport: Only the accessories shown in the pictures are sold. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), 10 secondhand bins available. Currently 760 new bins available. Pgjdpfjq Ih H Eox Alhor

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Description WE OFFER ORBITAL WELDING GUN TO WELD SHEET TO TUBE Pgjdpfxsvlarre Alhjr CAN BE USED FOR DIFFERENT APLICATIONS, TUBE TO SHEET. TUBE TO TUBE Specifications Manufacturer POLYSOUDE Model TS - 2000 Condition Used

Condition: like new (used), This paint shaker is brand new, taken from storage and never used. Pgjdpfxozvf Ays Alhsr Includes user manual.

Condition: not inspected (used), two "machines" assembled, scope according to the images. Psdpfx Aezwf E Rolhogr

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Pgedpfx Aljzvnr Rjhor Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) CE marked: Yes PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Pgjdpfx Aezvnqtjlher Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: ready for operation (used), Year of construction: 1984, Machine Identity & Compliance Manufacturer: Schmid (Feintool Schmid) Model / Type: T6-200 2 Year of Manufacture: 1984 Machine Serial Number: 20-1200 Internal Plant Asset ID: MK18166 / DB04134 Safety Certifications: CE Compliant Inspection Authority: TÜV Rheinland Operational Metrics & Current Counters Total Operating Hours: 110,777.4 Hours Total Stroke Count: 19,333,830 Total Strokes (Totalhübe) Mechanical & Force Profile Total Nominal Press Force: 2,000 kN (Approx. 204 Metric Tons) Downward Ejection Force: 400 kN Lower Ejector Stroke: 60 mm Maximum Slide Stroke: 200 mm Slide Range (Max Forming): 195 mm Slide Stop Adjustment Range: 75 mm Velocity & Frequency Ratings Rapid Approach Speed: 240 mm/s Return Stroke Speed: 240 mm/s Maximum Forming Speed: Approx. 26 mm/s Max Wobble Frequency: 340 cycles per minute (1/min) Fluid, Pressure & Lubrication Specifications Hydraulic Oil Capacity: 950 Liters Maximum Hydraulic Pressure: 320 bar Lubricating Oil Capacity: 100 Liters Maximum Lubrication Pressure: 550 bar Tooling Area & Configuration Setup Kinematic Type: Orbital / Wobble cold compression forming mechanism (Taumelantrieb) featuring a central heavy-duty guide pin. Die Space Requirements: Stamped for lower die installations using new mounting hardware (Einbau Untergesenk - Bitte mit neuen Schrauben). Integrated Safety Features: Electronic die protection circuitry (Gesenkschutz). Ejection Control: Upper and lower programmable ejection logic (Ausstossen). Air Cleanout Circuit: Pneumatic parts/debris blowout valve (Blasen). Pjdpfx Aezvnicolhogr Logistics, Power & Automation Infrastructure Electrical Supply: 3-Phase / 400 V / 50 Hz Net Machine Weight: Approx. 10,200 kg (10.2 Metric Tons)

Condition: excellent (used), VIBRATOR / SHAKE ID.NO. 2733 Vibrator / shake with Superior shake motors & associated electrical cabinet with frequency control perforated bottom. Very nice condition! Pgedstrfxzopfx Alher Dimensions 177 x 80 cm Height 140 cm. Shaking plate dimensions 150 x 50 cm H to edge 80 cm.

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Pgedpfxozu Nxie Alhsr Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production Podpfx Alow Uab Ashegr

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Psdpfx Aow T U Ubolhogr Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Pgedpjdzp T Njfx Alhsr Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: used, LDS V455 Vibration Testing System / Shaking Testing System Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Machine Type: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier For sale is a used vibration and shaking testing system from Ling Dynamic Systems Ltd. (LDS). The system consists of an electro-dynamic LDS V455 shaker, a PA 1000 power amplifier, and a separate fan/cooling unit. The system is suitable for generating defined mechanical vibrations, as well as for vibration, stress, and component testing. Possible applications include use in laboratories, development, quality assurance, and industrial testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 System: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier Amplifier Output Current Indicator: 0–20 A RMS Year of Manufacture: Not specified Fan Motor: Manufacturer: ASEA / Electrolux Elmotor A/S Type: M056SX2 Voltage: 220–240 V Current: 2.0 A Speed: 2,880 RPM Protection Class: IP54 Insulation Class: B Capacitor: 1.5 µF / 360 V Country of Manufacture: Denmark Fan: Manufacturer: Air Control Installations (Chard) Ltd. Type: 2M53 Voltage: 240 V Phase: 1 Frequency: 50 Hz Current Draw: 0.45 A Speed: 2,880 RPM Capacitor: 1.5 µF MFD: 440 VAC/WKG: 25 Made in U.K. Dimensions: The overall dimensions of the system cannot be clearly determined from the available images and nameplates. Equipment: LDS V455 electro-dynamic shaker LDS PA 1000 power amplifier Separate fan/cooling unit Shaker mounting / base frame Hoses and connection cables Transport case for the power amplifier Accessories as shown in the images Shipping data: Total weight: 240 kg Condition: Used Signs of wear and tear due to age and use are present. Dirt, paint chips, and traces of corrosion are visible. Optical condition as shown in the images. Scope of supply: 1 × LDS V455 electro-dynamic shaker 1 × LDS PA 1000 power amplifier 1 × Fan/cooling unit Shaker mounting / base frame Connection cables and hoses as shown in the images Transport case for the power amplifier Accessories as shown in the images Pedpfezulngjx Alhsgr Availability: by arrangement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: used, This listing is for the Grant Bio PMS1000 Microplate Shaker The unit is in full working condition and is ready for immediate use Overview of the Grant bio PMS‑1000i Microplate Shaker Applications Ideal for mixing, incubation, and cultivation of biological or chemical samples in disciplines like microbiology, immunology, molecular biology, and biotechnology. Common uses include immunoassays, high-throughput screening, colorimetric testing, and binding assays involving magnetic beads. Improves reproducibility by ensuring proper resuspension of PCR products, aiding in consistent optical density readings and better plasmid DNA yields. Key Features Shaking mechanism: Driven by a brushless, direct-drive motor, providing smooth and reliable motion. Speed range: Adjustable from 150 rpm to 1200 rpm, suitable for both gentle mixing and vigorous agitation. Plate capacity: Supplied with a platform for 2 microplates (standard-depth 96-well or 384-well), with an optional accessory (MPP‑4) for supporting 4 plates. Controls and display: Features a simple dial for speed adjustment, a 4-digit LED display indicating rpm and remaining time, plus a built-in electronic timer (1 min to 24 hours) with automatic shut-off. Secure plate fitting: Uses screw fittings to firmly hold plates in place, minimizing slippage during shaking. Technical Specifications Orbit diameter: 2 mm Pgjdpfxjxhfnto Alhor Dimensions: 90 mm (H) × 205 mm (D) × 220 mm (W) Operating temperature: 4 °C to 40 °C Power and consumption: External power supply (AC 120–230 V to DC 12 V), approximately 3.4 W (0.28 A)

Condition: used, This listing is for a Eppendorf New Brunswick Innova 2300 Benchtop Open Air Shaker Psdpfxjxzg Ize Alhegr For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study.

Condition: excellent (used), Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System Manufacturer: Brüel & Kjær / LDS Dactron Type: LASER USB LAS 200 Machine Type: Shaker Control System / Vibration Testing Controller For sale is a used Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System, including a USB license dongle and documentation. The system was developed for controlling electrodynamic vibration testing systems and is suitable for vibration tests, resonance tests, random tests, shock tests, and endurance tests in research, development, and quality assurance. Technical Data: Model: LAS 200 Type: LASER USB Power Supply: 100–240 V AC Mains Frequency: 47–63 Hz Power Consumption: 1 A 8 analog input channels (BNC) 2 output channels (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency Stop connector Software Configuration: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Enabled Options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Calibration: Calibrated: 09/12/2023 Due date according to sticker: 09/11/2024 Dimensions: Controller (W × D × H): approx. 430 × 350 × 90 mm Weight: approx. 6–8 kg Equipment: USB license dongle Power cable Documentation as shown in the pictures USB interface 8 measuring inputs Digital I/O Master/Slave interfaces Shipping Data: Dimensions: approx. 430 × 350 × 90 mm Weight: approx. 6–8 kg Condition: Used Optical condition as shown in the pictures. Calibration sticker is present. Scope of Supply: Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Pjdpezrtylsfx Alhegr Note: The license keys visible on the documents have been obscured for data protection and security reasons. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.