Used Otinus In Stock Milling Machine 1100X610 for sale (80,665)

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 Lodpfex D Tbmox Agrehl £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lhedpfx Aexxb Rrsgrsl Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Spindle: Transmission type: Belt Spindle speed: 40-8000 rpm Collet chuck: BT40 Motor power output: 11/18.5 kW Torque: 52.5/118 Nm Working table: Size: 1200x600 mm T-slots (width x quantity x spread) 18x5x100 mm Maximum load: 1000 kg Lhedpfovhck Nsx Agrsl Accuracy: Accuracy: 0.008 mm Repeatability: 0.005 mm Tool changer: Type: Drum Maximum tool diameter (full/free slots between tools/length): Φ78/Φ150/ 300 mm Maximum tool weight: 8 kg Miscellaneous: Compressed air demand: 0.65 Mpa Energy consumption: 25 kVA Machine weight: 7000 kg Dimensions: (L x W X H): 2900x2800x3200 mm

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Lhjdozuxn Topfx Agrol Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Ledpfx Asy Ni Ivogrjhl Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM Lodpfxoz Eh Egs Agrshl TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Lhedpfjy S Shwjx Agrsl Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. Lhjdeh S Uhfspfx Agrjl The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg. Lhjdpfx Ajz Dg H Hjgrol

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 17,000 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 1,500 mm, table length: 16,000 mm, table width: 3,000 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, distance between stands: 3,800 mm, type of input current: three-phase, position of the milling head: vertikal / Winkelkopf, rotational speed (max.): 3,000 rpm, distance table to spindle center: 2,300 mm, overall weight: 90,000 kg, spindle nose: ISO 60 / ISO 50 Adapter, spindle motor power: 60,000 W, Equipment: rotational speed infinitely variable, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy Duty Machining | Siemens 840D Retrofit | Ready for Production High-quality CNC gantry milling machine manufactured by Waldrich Coburg available for sale in very good condition. ✔ Machine under power ✔ Inspection & test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrical system & cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large part machining & heavy-duty applications Technical Data X travel: 17,000 mm Y travel: 4,800 mm Z travel: 1,500 mm Floor plates: 16,000 x 3,000 mm Distance between columns: 3,800 mm Distance table to spindle face: 2,300 mm Spindle power: 60 kW Spindle speed: 0.4 – 3,000 rpm Tool taper: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-step gearbox Right angle head WFU 250 with automatic indexing Right angle head WFU 500 with automatic indexing Rapid tapping Tool trolley with tool holders Steel way covers on X/Y axes 2 chip conveyors Perfect for: Ledpfoy Rrb Iex Agrohl Heavy machining Machine building Energy industry Shipbuilding Steel & rolling mill industry Subcontract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Please contact us for more information, videos, or inspection appointments.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: Lodpfxjx Af I Ao Agrjhl X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Condition Used Stock Number 00265 Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Y-Axis Travel 1008 mm Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel Ledpfoy N Amxsx Agrshl

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 289, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, feed rate X-axis: 1,100 m/min, feed rate Y-axis: 1,100 m/min, spindle speed (max.): 2,800 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, total height: 2,245 mm, total width: 2,470 mm, table width: 700 mm, table length: 1,200 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 45 rpm, table load: 1,500 kg, overall weight: 3,700 kg, input voltage: 400 V, workpiece weight (max.): 1,500 kg, distance table to spindle center: 775 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, Universal vertical boring and milling machine BoKö MF1, from a model-making workshop. In good, fully functional condition. Primarily used for processing plastics. Rotary table for workpieces with a diameter of up to 1900 mm. Lhjdpfx Aoz Ehbujgrsl Retrofitted 3-axis digital display. All original documents since purchase are available: scope of delivery, circuit diagrams, technical drawings, brochures, price lists, etc.

Condition: used, functionality: fully functional, P Macchine 03P – Industrial Machine (Year 2002) Manufacturer: P Macchine s.r.l. Model: 03P Lhodpfx Agsx Rvmusrsl Year of manufacture: 2002 Serial number: 03P0100071 Location: Finland Country of origin: Italy CE marked: Yes Description P Macchine 03P is a robust Italian-made industrial machine designed for professional use. The machine is CE certified and suitable for continuous production. Its solid construction and straightforward technology ensure reliable operation and easy maintenance. Technical specifications Voltage: 220–240 V Phase: 1~ (single-phase) Frequency: 50–60 Hz Power: 0.75 kW × 3 Current: 7 A Spindle speed: 12,000 rpm Operating air pressure: 6–7 bar Air consumption: 2 Nl/s Weight: 290 kg Additional information Test run possible by appointment Buyer is responsible for loading, transport, customs and all related costs All details to be verified with the seller prior to purchase 📩 Contact us for price, additional photos and further information

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC Lhjdpfxeyahv Ss Agrol CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1205-H740-00, total width: 1,650 mm, total height: 2,700 mm, total length: 2,500 mm, overall weight: 6,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 50 mm, controller model: ANDRONIC 2060, nominal power (apparent): 12 kVA, LANG RM 400 S/Y CNC engraving and milling machine Lodezlglzspfx Agrjhl - Operating voltage: 230/400 V - Frequency: 50 Hz - Travel range X-axis: 500 mm - Travel range Y-axis: 100 mm - Travel range Z-axis: +-50 mm, relative to the center axis of the RGV/200 mm - Swivel radius of the control panel: approx. 1050 mm - Travel speed X and Z axes: max. 30 m/min - Travel speed Y-axis: max. 20 m/min - Acceleration X/Y/Z at 10 m/s² Attention: The item must be collected between October 7th and October 14th, 2026, on a date to be determined. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: good (used), Year of construction: 2003, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,200 mm, total width: 2,000 mm, total length: 2,250 mm, type of input current: AC, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, table load: 250 kg, overall weight: 2,200 kg, input voltage: 400 V, space requirement height: 2,400 mm, input current: 8 A, input frequency: 50 Hz, Equipment: documentation/manual, Due to restructuring measures, we are selling our conventional milling machine – Intos FNGJ 40. - Year of manufacture: 2003 - Good condition for its age - Work table: 800(X) x 400(Y) mm Ledpjz Afddsfx Agrshl - Travel ranges: X 600 x Y 400 x Z 400 mm - Spindle: 63 – 3,150 rpm - 4 kW via gearbox - Driven axes: X, Y, and Z (feed and rapid traverse) - 3-axis Heidenhain digital display - Stable machine with solid guides - Weight: 2.2 tons - Identical in design to EMCO (these were later manufactured at the Intos plant) - Fully functional - Various tool holders, vises, etc., can be purchased depending on the agreed price - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made without any warranty. Collection only (EXW) – no shipping.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Ledezmt U Eepfx Agrehl

Condition: used, Year of construction: 1955, functionality: limited functionality, feed length X-axis: 820 mm, feed length Y-axis: 300 mm, feed length Z-axis: 60 mm, travel distance X-axis: 820 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 60 mm, mount diameter: 31 mm, position of the milling head: Horizontal & Vertical, type of input current: three-phase, rotational speed (max.): 100 rpm, table load: 300 kg, input voltage: 415 V, workpiece weight (max.): 300 kg, input current: 6 A, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, Maho MH600 universal milling machine. Classic German build quality with the desirable rounded‑casting design. Compact, rigid and ideal for toolrooms, prototyping, and precision workshop use. Would suit general engineering, car or motorcycle enthusiast. 3-phase but can also be used with an inverter such as a Mitsubishi or Jaguar, (not included) for use with a single-phase supply. Universal swivelling table and vertical adjustable angle head. ISO40 spindle. Rotary chuck SKF M110 Fastloc attachment included. Jones and Shipman vice included. Mechanical feeds for accurate horizontal and vertical bed travel. Works. I have, and can send (as I can't upload here) videos showing the cutter head running. Both horizontal and vertical feeds also work. External motor, so it can be accessed and changed if needed. Cooling system not fitted / not working. Ledjz D Nbyepfx Agrjhl I bought this machine from the Rose Forgrove Packaging Machinery Leeds as a Baker Perkins employee in the '90s for my Father-in Law. Used only lightly since then. Workshop is sold, so looking to find it a new home. Well looked after, and if I had room, I'd keep it! Accessories: Jones and Shipman vice included. I likely have some cutters that I'll dig out and photograph. Details from Spec plate: Mains supply: 3-Phase 415 V; Control voltage: 220 V with/without transfer; Rated current: 6A; Main fuse: 75A; Wiring scheme nr. n 7102 Dimensions [see data sheet] See pictures taken for speeds, specs and sizes. Do call with specific questions. Manufactured by MAYR, HORMANN & CIE K.G. MASCHINEN-FABRIK, PFRONTEN-STEINACH-ALLGAU, GERMANY. Please see the photographs and video for details, and contact me with any questions. Location is near King's Lynn, Norfolk, UK. Buyer to arrange and fund the shipment, which will need to include insurance and lifting onto your chosen truck. It's heavy, about 0.95 tonnes. Forklifting onto a lorry is possible, pending agreement via me, with the new property owner. Need to sell as new owner needs it out. Please make me a sensible offer!

Condition: used, Insert-type milling cutters for CNC machines. Ljdpfxezrydwo Agrehl

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: DC55-031, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, mount diameter: 175 mm, position of the milling head: 150 Achse Y, type of input current: three-phase, rotational speed (max.): 6,000 rpm, overall weight: 15,000 kg, table load: 1,000 kg, input voltage: 400 V, space requirement width: 4,000 mm, space requirement length: 6,000 mm, space requirement height: 3,000 mm, year of last overhaul: 2025, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machines are equipped with spindle speeds of 0-6000 rpm and SK 50 spindles. The first gear stage, 0-1000 rpm, can be switched to a lower gear ratio, providing very high drive power even in the low speed range, suitable for heavy machining. The pallet changer handles 2 pallets; a total of 8 pallets are available and compatible with both machines. The tool changer has 40 positions. Additional equipment: Internal cooling system Chip conveyor Lhjdjz D Tp Ujpfx Agrel Paper band filter system Separate oil cooler Various tool holders 1x Double angle plate 800 x 800 mm, manufacturer Kelch 3x Double angle plate 800 x 600 mm, manufacturer Kelch 4x NC vise Almatic Type NC 200 with 2 base plates (can be assembled as a clamping tower) Optionally, a second machine of the same type is available. Disassembly of the machine is possible after costs have been covered, with self-disassembly preferred.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake Lodpfx Aeytb Uhjgrshl - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Condition: excellent (used), Year of construction: 1964, functionality: fully functional, Manufacturer: KNAPP-DONAU Model: UZFM Year of manufacture: 1964 Condition: used Price & Location Location: Rostock, Germany Lodpfxjytbrao Agrjhl Milling length: 1800 mm Milling width: 260 mm Module - max.: 10 mm Table dimensions incl. coolant channel: 460 x 2100 mm Clamping surface: 250 x 1850 mm Maximum milling cutter width: 100 mm Infinitely variable feed of the milling carriage: 0 - 500 mm/min Rapid traverse: 3000 mm/min Swiveling milling head: +/- 30° Spindle speed range, 9 steps: 29 - 178 rpm Milling head tiltable on both sides for helical gearing: 30° Machine weight: approx. 3.5 t Space requirement: approx. 4 x 1.85 x 1.85 m Equipment/Accessories - 13 vices - Change gears - Clamping devices - Documentation

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Lhsdoz Eft Iopfx Agrel Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 80753, total height: 2,300 mm, total width: 1,750 mm, total length: 2,500 mm, overall weight: 4,700 kg, Equipment: documentation/manual, Offered for sale is a universal tool milling machine, MAHO Type MH 800 P, with digital display and linear control system HEIDENHAIN TNC 121. Year of manufacture: 1980 Travel distances X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z-axis: 10-500 mm/min, infinitely variable Feed rate Y-axis: 5-250 mm/min, infinitely variable Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Arbor displacement, vertical: 100 mm Arbor feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Arbor displacement, horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 volts, 50 Hz, 10 kW - Swiveling control panel Ledpfx Agoztkbcsrshl - Central lubrication - Operating manual Machine dimensions L x W x H: 2.5 x 1.75 x 2.3 m Weight: approx. 4,700 kg