Used Ott 300-K-D0 for sale (46,936)

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating Cedsx D E Avspfx Ad Norb

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Codpfx Ajy Aplzjd Nsrb Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: used, working width 750 mm working length 3.000 mm length ~ 3.850 mm width ~1.000 mm Cjdpoy Erymsfx Ad Njrb height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function.

Condition: excellent (used), Working width: 130 cm Working height: 41 cm Length: 255 cm Electrically heated grates 4 pistons Codpfxjygxble Ad Nerb 18 kW

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Codjyh H Uyepfx Ad Nsrb Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Cjdexbfutjpfx Ad Nsrb

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm Crsdjx Uru Nopfx Ad Nsb table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: new, Year of construction: 2026, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! Credpfx Asr Ez Uwsd Neb ASK FOR A QUOTE!

Condition: ready for operation (used), Two gravimetric belt weighfeeders K-Tron are available. Load cell measuring range: 60N, belt width: 300mm, throughput: 650kg/h, max. grain size: 10mm. Machine dimensions X/Y/Z: approx. 1400mm/750mm/450mm, weight: approx. 150kg. The machine control was overhauled recently. Documentation available. An on-site inspection is possible. Cjdexxl Riopfx Ad Njrb

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm Csdju Rv Ttspfx Ad Nsrb -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Condition: used, Year of construction: 1999, used fan Radial fan with V-belt drive Suitable for use in raw air and clean air applications Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Crodpfx Ajy Dkgved Nsb Discharge direction GL 360/5 Connection 300 mm Motor power 11 kW Air flow 7000 m³/h Availability: short-term Location: Röllbach

Condition: used, maximum load weight: 1,115 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,010 mm, loading space width: 1,670 mm, loading space height: 161 mm, total width: 2,200 mm, total height: 1,185 mm, * Universal transporter by Pongratz, type L-PAT 300/16 G-K, vehicle transporter, gross weight: 1,500 kg, with loading ramp, low loader, overrun brake, and much more. Errors and prior sale excepted. Csdsyn Uggepfx Ad Njrb

Condition: good (used), Wire electrode, welding wire, welding wire Cedpfxjfw Rwbe Ad Njrb -Material: stainless steel -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 / 105 mm -Weight roll: 13.8 kg

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Csdpfx Adjudwzco Norb Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: used, mileage: 541,000 km, first registration: 12/2017, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2017, = Further options and accessories = - Air suspension = Remarks = Iveco Eurocargo 140 E 250 refrigerated truck with Mitsubishi TDJ 430 D refrigeration unit, Lamberet Multitemp box body and tail lift Chassis: • Emission standard: EURO 6 C • 250 HP engine, 6,728 cm³ • Cruise control • Leaf/air suspension • Automatic transmission • Lane departure warning system • Brake assist • Hill start assist • Differential lock • ABS • ASR / can be deactivated • Airbag • Air conditioning • Central locking • Double passenger bench seat (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Tire size: 285/70 R 19.5 • Tread depth: 8/6/6/5/9/13 • Gross vehicle weight: 14,000 kg • Unladen weight: 8,580 kg • Payload: 5,420 kg! • Overall vehicle dimensions: 9,130 x 2,600 x 3,450 mm (LxWxH) Superstructure: LAMBERET refrigerated box, year 2017 • 17 pallet spaces • 3-wing rear portal doors • Aluminium protective rails, 2 each right and left, lower and upper • Double lashing rails, right and left • Floor: aluminium chequer plate • Internal dimensions: 6,980 x 2,470 x 2,200 mm (L x W x H) • BÄR BC1500 S4-B4 tail lift, upright • Lifting capacity: 1,500 kg Refrigeration unit: • Mitsubishi TDJ 430D Multi refrigeration unit (year 2017): • Engine/electric (380 V) • Remote control in driver's cab • Temperature recorder - German vehicle - 1st owner! - TÜV / main inspection / SP: new Errors and prior sale excepted! Csdpfx Ajwmmxted Nerb

Condition: used, Year of construction: 1986, grinding wheel diameter 300 mm table length 0 mm table width mm total power requirement 11 kW Cedpfot Hwzvox Ad Nsrb weight of the machine ca. t dimensions of the machine ca. m Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW

Condition: good (used), Year of construction: 2009, machine/vehicle number: 48277, MIG-MAG pulse machine of the renowned manufacturer MERKLE. Crsdpfx Aemk H Awod Neb The machine is technically in perfect condition. All switches work and the machine welds perfectly. Only the hinge of the wire feed flap is broken. The technical performance data is best taken from the photographed nameplate. The machine is ready for welding in our warehouse. Test welding is possible at any time. In addition, we supply all accessories and spare parts that you may need. You can download the operating instructions for the machine directly in the advertisement. Shipping possible.

Condition: as good as new (ex-display), Technical data: System: SSI Schaefer Type: K-SW-4300 Included in delivery: 01x side cheek, II. choice length: approx. 4.294 mm Profile type: C115/22/2 C-profile: approx. 115 x 22 x 2 mm Crjdpjibl Eyofx Ad Nsb Unit weight: approx. 13.23 kg Information: - for KDR levels in PR and WR systems from SSI Schäfer to hold longitudinal & cross profiles as well as roller bars - also suitable with bend - can be used both inclined and in balance

Condition: ready for operation (used), Rexroth MSK071D-0300-NN-M1-UG1-NNN MNR: R911310168 Synchronus PM motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Crsdpfx Aji D Nn Isd Nsb

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net Crjdpfx Asy Izh Sjd Neb 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee Crodpfxsy Ixvte Ad Nob - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: like new (used), load capacity: 300 kg, arm reach: 3,150 mm, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: KR 300 PA TECHNICAL SPECIFICATIONS PAYLOAD: 300 kg Csdpsy Nlz Sefx Ad Nerb REACH: 3150 mm CONTROLS: KRC2 ED05

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 12.6 kW (17.13 HP), workpiece height (max.): 50 mm, edge thickness (max.): 15 mm, feed rate X-axis: 22 m/min, overall weight: 3,200 kg, year of last overhaul: 2024, Ott Shark Edgebander for PUR The machine is fully functional and can be viewed and tested on site! The machine was completely overhauled by a specialized company 2 years ago! Equipment: - Angle stop for small parts - Release agent spray unit - Joint trimming unit - Pressure unit - Crosscut saw - Profile trimming unit - Profile milling unit (R2) - Radius scraper blade - Corner copying unit - Flat scraper blade - Polishing station (oscillating) Crsdpjy H Dx Djfx Ad Neb Additionally included: - PUR glue pot - EVA glue pot - Service station with vacuum box and cleaning/boiling station

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter Credowiwnqopfx Ad Nsb

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Crjdpfxsfbr S Ro Ad Nob • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)