Used Ozcelik Aluminium Crosscut Saw for sale (7,912)

Year of construction: 2024, condition: new, - Semi-automatic - Saw blade 420 mm - Double mitre - 4 Pneumatic clamps - Spray lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Protective cap - Technical documentation - 400V Itjdpfxjgg N A Rj Adkeg

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Ijdpfxoyngnis Adkotg

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Ijdpfjy Dtpmox Adkstg ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm Ijdpey Tkguofx Adketg - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail Isdpfx Adoy Tkfkokjtg - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7181 TECHNICAL DATA - max disc diameter: 300mm - disc bore diameter: 30mm - disc guard - max cutting height: 100mm - max cutting width: 700mm - possibility of angle cutting in the vertical plane +90°/-90° (arm travel or disc travel) - possibility to rotate arm right/left - motor: 2.2kW - table size: 950x700mm - extraction port diameter: 60mm - dimensions (LxWxH): 1200x950x1400mm - weight: 155kg ADVANTAGES – manufactured in Italy Itjdpfx Ajy S Argjdkeg – not repainted – very good condition – used saw Net price: 6500 PLN Net price: 1550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (with larger exchange rate fluctuations the price may change)

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer with Brushless cutting system for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 500 is a high-speed optimizer able to meet the highest production capacities with utmost reliability. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed of a computer connected in real time to a last generation numeric control. Software S4U running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. Macro Excel included. FAST Innovative cutting system, it is so fast as to make the blade almost invisible to the human eye. Fast and full optimization maintaining a notable compactness of the machine. Feeding system with Brushless servo driven 18 Nm motor. Cutting system with Brushless servo driven 28 Nm motor. Power motor blade HP=7,5 (5,5 kW) Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Itedpfx Aefhdvrjdkog Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Iodpfsfhgz Iox Adkstg Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting Itedpfxoy Sty Ie Adkjg A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: used, Year of construction: 2018, Cursal TRSI 8000 AP Automatic Crosscut Saw With Integrated Pusher - 2018 CE Durable and versatile automatic crosscut saw with exceptional speed and accuracy. Impressive speed and accuracy CNC programmable sequential cutting capabilities Optional loading and unloading Isdpjxxvqtsfx Adketg Specification : 6000 mm In feed capacity, push feed crosscut Saw Single-block structure: the frame made of welded - worked steel Pneumatic side-aligner installed before of the blade Pneumatic blade-press with mobile casing: stroke 150 mm. Breaking press-wheels with horizontal axis installed after blade Cutting height on the guide: 120 mm. Width of the boards: min. 40 - max. 250 (300) mm Automatic cutting control managed by the computer Vertical alternated blade movement: pneumatic system with totally controlled stroke Saw blade HM steel with alternate teeth Ø 500 mm, hole Ø 35 mm - Z=120 Blade motor HP 7,5 with automatic brake Cutting time: adjustable from 0.3 to 2 seconds CNC unloading belt with 2 programmable ejectors 2018 CE

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW Itsdpey N D Nhofx Adksg weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm Itedpjy R Ehuefx Adkjg 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations) Itodoy R Dy Aspfx Adkeg

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW Isdey Rrgwjpfx Adkstg - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7991 TECHNICAL DATA - max saw blade diameter: 400 mm - saw blade bore diameter: 30 mm - blade guard - height-adjustable arm - max cutting height: 120 mm - max cutting width: 540 mm - hydraulic saw feed - 3 infeed rollers on the table - motor: 3.7 kW - hydraulic pump motor: approx. 0.55 kW Iedoy Nx Urspfx Adkstg - extraction port diameter: 110 mm - roller width: 530 mm - machine dimensions (L/W/H): 1900x1500x1950 mm - weight: 650 kg ADVANTAGES – Polish manufacture – DTR documentation – very good condition – used saw Net price: 13,900 PLN Net price: 3,300 EUR (depending on the exchange rate of 4.2 PLN/EUR) (Prices may change in case of significant currency fluctuations)

Year of construction: 2018, condition: used, Manual underfloor circular saw for saw blade up to Ø 250 mm Swivel range for miter cuts -45°/90°/+30° Working area (Round) 90° 80 mm (Round) 45° 80 mm (Square) 90° 70 mm Isdpfoy Nm N Rox Adkotg (Square) 45° 65 mm 220 V

Year of construction: 2004, condition: good (used), Underfloor saw Manual operation For saw blade up to Ø 300 mm Mitre cutting left - right up to 45° Manual spray unit for emulsion Robust steel housing and support table made of grey cast iron 400V Iedpfx Adey Nm Hiekjtg Mobile on base frame

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Isdpfx Adsy R Ev Esketg Specification: • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 350 R • Blade diameter – 350 mm • Saw motor – 2.2 kW • Max. dimensions of material cut at 90°: 120 x 150 mm (height x width) • Saw blade guards for operator safety • Dust extraction port – diameter 60 mm • Cutting angle adjustment +/- 45 degrees • Motor brake • Machine complies with CE standards and comes with documentation in Italian • Stops for repeat cutting to identical lengths • Year of manufacture: 1999 • Overall dimensions without tables: 80 x 75 x 70 cm (length x width x height) Additional Information: • The machine is in very good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to start and test the machine on-site • Free operator training at the company headquarters • The auction price does not include VAT or shipping costs Financing and transport: • We organize transport using the MDD fleet, courier companies, or external carriers • Financial support is available in the form of leasing or lease-back loans

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Itodpfx Adov R Dxaokjg Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, functionality: fully functional, BOTTENE Crosscut Saw – After Technical Inspection, Ready for Work Specification: • Condition: used, after comprehensive inspection • Manufacturer: BOTTENE • Blade diameter: 330 mm • Saw motor: 1.5 kW • Max dimensions of cut element at right angle: 110 x 200 mm (height x width) • Table size: 70 x 55 cm • Fences adjustable at an angle • Pneumatic blade lifting/lowering – operated by foot pedal • Overall dimensions without tables: 90 x 80 x 105 cm (L x W x H) Ijdpsy Rh Epjfx Adketg Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale • Possibility to switch on and test the equipment on site • Price listed in the auction does not include VAT or transport costs Financing and transport: • We organize transport via the MDD fleet, courier companies, or external carriers • Financing support available in the form of leasing or lease-loan

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – after technical inspection, ready for operation Specification: • Technical condition: used, after comprehensive maintenance • Manufacturer: OMGA • Model: TR2A • Main motors: 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Max. cutting length: 312 cm • Min. cutting length: 10 cm • Max. cross-section at 90°: 80x145 mm • Max. blade diameter: 300 mm • Mitre cutting range: -45° to +45° (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports: 80 mm diameter Iodpjy Rh Drefx Adkjtg • Weight: approx. 500 kg • Overall dimensions: 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos provided show the actual condition of the item for sale • Inspection and functional testing possible on-site • The listed price excludes VAT and transport costs Financing and transport: • Transport can be arranged via our own MDD fleet, couriers, or external carriers • Financing support available in the form of leasing or lease loans

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Itodpfx Adexwumqjkjg Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm Itedpfx Adefc T Ufekeg capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Year of construction: 2025, condition: used, We are offering this used M.S.K. OMRM 133 OMRM133 automatic double-head PVC alu machine, diameter 550 cm, year of manufacture 2025. Model: OMRM 133 Serial number: 25DCM330004 Production date: 2025 Power: 6.5 kW Voltage: 400 V Frequency: 50 Hz Current: 32 A Air pressure: 6-8 bar Air consumption: 95 l/min Weight: 1220 kg Width: 1985 mm Length: 8110 mm Ijdpfx Aey Encwedkotg Height: 1895 mm Country of origin: TURKIYE If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Hüllhorst DH54S Itjdjxrzfvopfx Adkjg Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm