Used Pöttinger Top 1252 C for sale (61,403)

Condition: used, Year of construction: 2015, 5-wheel chassis + 1 steering wheel at the front, mechanical adjustment of cutting height, self-contained hydraulics, air brake system, without spreading hood, Pöttinger operating controls, wide-angle PTO shaft, tire size 620/40R22.5. Kjdsz Sbd Sepfx Ahienc

Condition: used, Year of construction: 2019, Compressed air brake system, wide-angle universal joint, self-contained hydraulics, ISO bus, five-wheel chassis, tires 710/35R22.5. Knedpfx Ae Aba H Ujhisc

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were. Ksdszp E T Sspfx Ahisnc

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: COMEC Model: MD TOP L CA2 Type: Milling and mortise cutting machine Year of manufacture: 2024 Used, with signs of wear, good condition For sale from the location 07570 Weida Technical data according to the manufacturer: Axes: 3 X-axis: 2,500 mm Y-axis: 250 mm Z-axis: 180 mm Horizontal machining unit Electric spindle for milling with a 3.3 kW motor Milling spindle: 12,000-18,000 RPM, adjustable Tool holder: ER32 Drilling unit with a 1.7 kW motor With 16 individually selectable horizontal spindles, pitch 32 mm Drill chuck with a diameter of 10 mm Drill: 4,350 RPM Vertical machining unit Electric spindle for milling/drilling/routing with an 8.0 kW motor Tool rotation speed 12,000-18,000 RPM, adjustable With C-axis, interpolating 360 degrees Unit for saw blade with 2 outputs, 180° for drilling or milling tools Unit shank, tapered ISO30 Tools, collet chuck ER32 Vertical electric spindle for drilling with a 1.7 kW motor, 4,350 RPM 1 drilling head with individually selectable spindles, including: 3 vertical drilling spindles in a row, pitch 32 mm 7+7 front/rear, horizontal drilling spindles in a row, pitch 32 mm 2+2 left/right, horizontal drilling spindles in a row, pitch 32 mm Drill chuck, diameter 10 mm with lateral locking pin Clamping system 6 clamping brackets Adjustable on guide rail With 6 clamping cylinders and 6 lateral alignment cylinders with reference stroke Automatic adjustment of the supports via NC control The clamping brackets are fixed or released via program Extra workpiece width Specially designed clamping elements for a workpiece width of 100 mm Workpiece dimensions to be machined Max. cross-section of the workpieces to be machined Length: 2,250 mm Width: 100 mm Thickness: 30 mm Automatic loading system, model CA2 Adjustable on linear guides with a fixed left side and an adjustable right side Vertical parts magazine with automatic loading system and easy access for the operator Workpiece unloading system on 10 slide rails Knsdoz Izm Nopfx Ahiec We will gladly send you further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected by appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2018, PTO shaft, single-disc mower, 2 x 10 mower discs, hydraulically folding protective covers, center suspension, quick-release knife system. Kedez Sc A Aepfx Ahisnc

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Ksdpfjzp Nt Ajx Ahisnc Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Year of construction: 2006, condition: ready for operation (used), TETRA PAK ESL GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH TWIST CAP APPLICATOR TETRA REX TR22 FILLER YOM 2006 ESL UNIT INCLUDED CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS Knjdpfjz E U Dvox Ahisc EXCELLENT TECHNICAL CONDITION

Condition: like new (used), Year of construction: 2015, machine/vehicle number: Nr.2012/15, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, total width: 2,000 mm, total length: 9,085 mm, total height: 2,713 mm, overall weight: 1,400 kg, 1. Technical Specifications Parameter Specification / Value Knjdpfxez A D Rte Ahiec - Manufacturer / Brand Schraml Glastechnik GmbH (LiSEC / LiTROS Group) - Model / Type topCLEAR TC 20 Super-4 - Serial Number 2012/15 - Year of Manufacture 2015 - Direction of Operation From right to left (R → L) - Working / Operating Height 580 mm - Maximum Washing Height 2,000 mm - Glass Thickness 3 – 20 mm - Minimum Glass Dimensions 300 mm x 50 mm - Number of Washing Brushes 4 pieces (2 pairs for double-sided intensive cleaning) - Transport Speed Adjustable, 1 – 5 m/min - Total Weight 1,400 kg - Dimensions: L: 9085 mm H: 2700 mm W: 2000 mm

Condition: used, Year of construction: 2013, Working width 8.76 - 9.56 m hydr. edge protection folding hydr. support pressure control / quick blade change Parking supports Operation Power Control PTO shaft / Knsdpet Sr R Aefx Ahisc

Condition: used, Year of construction: 2020, - Tool box - Lighting Knedpfx Ajz Na Saohijc - with conditioner and Isobus - Blade key - 2,958 kg basic weight

Condition: used, Year of construction: 2021, machine/vehicle number: 20118-0004, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 250 mm, number of axes: 3, number of slots in tool magazine: 6, total height: 2,100 mm, total length: 3,900 mm, total width: 2,150 mm, overall weight: 2,900 kg, For sale: a very well-maintained and complete Comeva Nicron Vacuum Bars 13/32 CNC machining center, manufactured in 2021. This machine is ideal for flexible interior designers, furniture makers, or door specialists. Thanks to the generous working area of 3,200 x 1,300 mm and the adjustable beam table with vacuum cups, you can work quickly and precisely with solid wood, sheet materials, or frame/door elements. Highlights of this machine: - Beam table: Ergonomic and quick to adjust for various workpiece sizes. - Powerful main spindle suitable for heavy milling work, grooving, and a drilling unit. - Automatic tool changer: 6-position tool magazine for fast cycle times. - Reliable vacuum system: Includes a high-quality Becker vacuum pump. Compact setup: Freestanding control cabinet on wheels with clear controls. Equipped with Pegasus software. Kjdpfxjz Af Suj Ahijnc The machine is located at a customer's site and can be viewed in operation; location: Staphorst, the Netherlands.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe Knjdpfxozzmmws Ahioc x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Condition: ready for operation (used), Year of construction: 2005, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible. Knjdpfx Aoy Nm U Tshiec

Condition: reconditioned (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25/699, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, Equipment: emergency stop, A virtually as-new, original Meyer Burger TS23 cut-off machine with the special hydraulic "Zürbeli table" and the large 27-1/6" clamping system is being offered. Knedpfexy Ra Sox Ahijc Additionally, our current DS1 displacement measuring device with HMI is installed. The machine is in truly impeccable condition, fresh from the workshop, having received a complete inspection, maintenance, testing, and service. The machine is complete, with original documentation available. The photos are taken by us and are up to date. For further information or to arrange details, please contact us. The machine is available directly from our stock. Prior sale reserved at all times. TIP: We continuously stock further Meyer Burger machines and spare parts – please also visit our website! Feel free to contact us, we will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2011, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Knodpfx Ajy Nm U Hjhioc

Condition: used, Year of construction: 2003, air flow quantity . m³/h suction power . kPa power capacity 2,2 kW Sweat extractionThe techn. Knodpjyqtbhefx Ahijc The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, Quick blade change / Kedet A Smxopfx Ahienc

Condition: used, Year of construction: 2012, operating hours: 15,000 h, LIEBHERR R 964 C – ONE OWNER – EXCELLENT CONDITION – BACKHOE EXCAVATOR ----VEHICLE HISTORY ONE OWNER GERMAN MACHINE ----VEHICLE FEATURES ----BRAND LIEBHERR ----TYPE TRACKED EXCAVATOR BACKHOE EXCAVATOR ----YEAR OF MANUFACTURE Kodpfxew Ua Trs Ahionc 2012 ----OPERATING HOURS 15,000 h ----POWER 320 kW ----ENGINE LIEBHERR ENGINE ----MAINTENANCE SERVICED EXCLUSIVELY BY LIEBHERR ----AVAILABLE IMMEDIATELY ----EXPORT SALES ONLY WITH DEPOSIT (SECURITY) OF AT LEAST €500–€2,000 ----EXPORT DECLARATION/CUSTOMS—EXW AVAILABLE IN 10 MINUTES (AUTHORIZED EXPORTER); 5-DAY, 30-DAY PLATES AND 17–21 DAYS FOR AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least €500/€1,000 is required for sales to the EU and third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00/€1,000.00 will be levied.) Subject to changes, errors, and prior sale! You will find more vehicles on our website. Sales are made exclusively according to our Terms and Conditions — see website. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some originate from transmission errors between the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer as defined by §145 BGB. Instead, it is provided for the initiation of a contract. The information provided here is without guarantee and therefore does not represent warranted characteristics.

Condition: excellent (used), I am offering a circulation pump from the renowned brand WILO, model TOP-E 40/1-10, equipped with electronic control. The pump is intended for heating systems, HVAC, and industrial applications. It features an electronic module with a display and operation adjustment, which allows for the optimisation of energy consumption and performance. 🔧 Technical data: Manufacturer: WILO Model: TOP-E 40/1-10 Power supply: 230V / 50 Hz Type: electronic circulation pump Connection diameter: DN40 (approx. 40 mm) Kjdpfsz Smucsx Ahionc Insulation class: F Degree of protection: IP43 Pressure: PN6 Medium temperature: up to 110°C Rotation speed: 850 – 2850 rpm Power: 30 – 570 W Current: 0.45 – 4.80 A 📦 Condition: Used item. Shows normal signs of use but is in good technical condition and fully functional. 📌 Additional information: Electronic operation regulation High-quality workmanship – made in the EU Ideal for central heating, industrial, and circulation systems Robust construction

Condition: used, Weighing station for the food industry The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes. Located in Emmeloord, the Netherlands. Immediately available, price on request. Knedpez Ndg Ujfx Ahisc More photos and full specifications: / Type: Weighing scale / weighing station Indicator: Top Control colour touchscreen Construction: Stainless steel frame with weighing platform and product tray

Condition: used, Universal joint shaft, 4 cutting drums, hydraulic lift mechanism. Knsdjz Sau Aopfx Ahiec

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm Knodpfozu A D Esx Ahijc - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence Reconditioned: NEW=> hydraulic cylinders, air piping, safety guards This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% Knedpfx Ajwh Rvrehiec depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg Knjdpex Sw N Hefx Ahiec

Condition: excellent (used), Year of construction: 2008, Top finish brushing machine Italmeccanica TOP FINISH 6T -2M brushing machine one horizontal shaft two edge pin two rotary Knsdpfx Ahok Iu Hvjiec