Used Packinov 1015 D for sale (46,598)

Condition: used, Year of construction: 2015, Manufacturer: Packinov Model: 1015 D Year : 2015 Type: Semi-automatic electric dosing machine Volume digitally adjustable Dosage cylinder available: 2 blocks, max. 85 ml. 3 x hoppers, 1 of which is double-jacketed Mixer for hopper Temperature controller Hnjdpfxsx R Dhye Akrou Foot-operated actionner Control panel Height-adjustable frame Machine dimensions: 110 x 100 x 190 cm

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW • Dimensions: o Length: 3,600 mm o Width: 2,600 mm o Height: 2,300 mm Hedpfx Ajwm Nfvjkrjnu o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Year of construction: 2009, condition: used, machine/vehicle number: 0201-260036, This drilling machine is ideally suited for the economical drilling, center punching, marking (scribing), and threading of profiles and flat steel bars in the steel construction and steel trade industries. The Kaltenbach KDXS drilling machine is equipped with 3 drilling units, each with a 26 kW drive power, and each with a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage) is designed together with the T13 transport system for profile lengths up to 12 m (other lengths optional). The transport system for material transport of profile steel also has transverse carriages at the infeed and outfeed points for the transverse transport of the profiles. The CNC control, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The complete system has an ergonomic working height from the material level to the top edge of the floor of 640 mm, thus providing good visibility for the operator. Hnodoz Ih Efspfx Akrou

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Hnsdpfx Akswrhwzsrou

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This sawing and drilling system is ideally suited for the cost-effective sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in the steel construction and steel trading industries. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW of drive power and a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage), together with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for handling structural steel also features cross conveyors at the infeed and outfeed for the transverse transport of the sections. The CNC control system, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, providing the operator with a clear view. Hnjdpfoymy Imjx Akreu The removal and ejection of the initial cut or the onward transport of the profile to the discharge area is performed by a gripper located after the saw. The Kaltenbach KBS 1010 DG – KDX-S 1015 sawing and drilling system combination consists of: STEEL PROFILE DRILLING SYSTEM Kaltenbach KDX-S 1015 MITER BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Hsdpfx Akez Sl Aroronu Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: B72A0198004, Plastic BLOW MOLDING MACHINE, Make: MILACRON, Model: E90-D-8, Serial Number: B72A0198004, Year: 1998, 90-ton clamping capacity; toggle-type clamping system, 8.0 lb/head head capacity, head centerline: 0.51 m, no PTO; platen dimensions: 1.22 × 0.94 m, tie bar spacing (H × V): 1.02 × 0.76 m, minimum shut height: 0.38 m, maximum shut height: 0.51 m, clamp stroke: 0.76 to 1.02 m. Equipped with WITTMANN Cartesian Robot, Serial Number: W753-5153, 220 V. Please inspect. Hjdpfx Ajz Svr Nekrsnu ESPAÑOL: Maquina de Moldeo por Soplado de plastico marca: MILACRON, modelo: E90-D-8, número de serie: B72A0198004, año 1998, Capacidad de cierre 90 Toneladas. sistema de cierre tipo Toggle (rodillera), capacidad de cabezal de 8.0 lb/head, línea central del cabezal (Head Centerline) de 0.51 m, sin PTO; platina de 1.22 × 0.94 m, distancia entre barras (H × V) de 1.02 × 0.76 m, altura mínima de cierre (Min. Shut Height) de 0.38 m, altura máxima de cierre (Max. Shut Height) de 0.51 m, carrera de cierre (Clamp Stroke) de 0.76 a 1.02 m. Equipada con: Robot cartesiano marca WITTMANN, número de serie: W753-5153, 220 V. Favor de Inspeccionar.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hodpjz Nkuaefx Akrenu Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, 4-axis machine X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Hnodpfx Akez Rn Rnorju Pallet changer Coolant filtration system High-pressure coolant through the spindle

Condition: good (used), Year of construction: 2002, functionality: limited functionality, Description Working range: X-axis (longitudinal): 800 mm Y-axis (transverse): 400 mm Z-axis (vertical): 440 mm Table clamping surface: 800 x 400 mm Table load max: 700 kg Hnjdpovk R Stjfx Akrou Sanding head: Grinding wheel diameter: 400 mm Drive power: 4 KW Dimensions / weight / transport dimensions: PACKING LIST: 4500x2300x2800 mm Machine 850x650x1400 mm Control panel 1600x650x900 mm Extraction unit 750x580x1000 mm Cooler 1800x900x750 mm Belt filter with pump 1050x650x2100 mm Switch cabinet 1200x800x400mm Grinding wheels+electrical diagram+operating instructions+stand Weight: 3.700 kg ACCESSORIES AND equipment: ' Magnetic clamping plate SAV 600 x 400 mm ' Coolant system with belt filter system ' Diaform unit type 102/RA210 ' Airtech MFE20-SP extraction system ' Hand wheel ' Various grinding wheels / flanges

Condition: as good as new (ex-display), Year of construction: 1999, functionality: fully functional, WE OFFER MIKRON CNC Hjdpfx Akovnz Exorsnu AN VERY EXCELLENT OPORTUNETEY TO BUY AN NEW CONDITION MACHINE MACHINE IS BRAND NEW CONDITION- NEWER USED FOR ANY WORK.

Condition: ready for operation (used), functionality: fully functional, HM-D 539 production optimization Hnodpfx Aoz Sx D Uskreu maximum disc diameter: 550 mm minimum disc diameter: 500 mm Disc saw diameter on the spindle: 30 mm voltage: 400V power: 10 kW loading CE marking year: 2006

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 03/2028, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1st hand – German volunteer fire department vehicle. TÜV (technical inspection) valid until 03/2028. An expert opinion according to §23 StVZO in conjunction with §21 StVZO as a "vintage vehicle, special-purpose vehicle, fire department vehicle, equipment carrier" (for an H-approval) dated 09.03.2026 from TÜV Rheinland is available. Engine oil with filter / brake fluid / 4x glow plugs / windshield wiper blades – NEW – replaced in a specialist workshop in 2026, invoice available. Until recently, it was registered with the original owner, including the original vehicle registration document from 1989. Only 21,000 kilometers driven in total. Very well-maintained Bremen Transporter T1 in the medium-length version with the sturdy, factory-installed metal high roof. Body condition in detail: 2 rust spots (rear right wheel arch and left side panel). The front right wheel arch has already been repaired; otherwise, it is in good original condition all around. Normal signs of wear and tear are present. The underbody is in good condition. This 308 D was explicitly sold to us by the original owner as "accident-free." New winter tires (DOT 2022). High 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, it is an absolute basic version. No seatbelts. No power steering. No ABS. Simply pure 1980s – back then, they could still build durable, reliable cars. In any case, very little can go wrong here. Engine: OM 601, 4-cylinder naturally aspirated diesel with 79 hp. 5-speed manual transmission. 127 km/h is stated as the maximum speed. When the sliding door is opened, a large step extends mechanically. The vehicle was used by the fire department as an equipment carrier and has some shelving units that can be easily removed when not in use. Conversion manufacturer: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as a "Miscellaneous Motor Vehicle, Fire Department Vehicle." Unladen weight 2320 kg (including all fittings). Permissible total weight – original from the factory and unchanged to this day – 3500 kg. This means that this 308 D-KA can be driven immediately with the new passenger car driver's license. The special warning system has already been removed by the fire department before the sale and is no longer available. The vehicle runs very well; the transfer journey on the highway was a real pleasure. This offer applies only to commercial businesses and freelancers of any kind and industry, as well as to authorities / emergency services. Unfortunately, we do not sell directly to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net. Taxation according to §25a UStG (German VAT Act) as a municipal vehicle. Therefore, no 19% VAT will be added. At the same time, the VAT cannot be separately calculated from the purchase price. Hnedpfx Aow Tpfuokrsu

Condition: good (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: TCG51403A, number of ink cartridges: 4, total length: 4,200 mm, total width: 2,500 mm, total height: 1,500 mm, year of last overhaul: 2023, type of input current: three-phase, input voltage: 380 V, overall weight: 2,200 kg, working width: 320 mm, tank capacity: 5 l, used machine, dismantled Hodottuiiepfx Akrsnu

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine 32 Ah connection with 2-hour timer, 2 speeds on castors Hodedc Eh Ajpfx Akrsnu In excellent condition, operates quietly If you have any further questions, please contact us. Thank you in advance.

Condition: new, Fanuc A06B-1015-B100 AC spindle motor, model 15, mounting hole spacing: 185 x 185 mm, drive shaft diameter: 48 mm, unused, 100% functional. Hsdpfx Asi D H Rdjkrsnu NOTE: Please request a separate quote for packaging and shipping costs!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Depositor for hot products, will connect to a cooking vessel and pump it into bags with set a weight which is adjustable Air operated clipper to seal the bag Finished clipped bags can go into a tumble chiller to cool down. The machine is in good working order and ready for delivery Hnsdpfx Aoxgutpjkrou Single phase electric 240 volts 50 Hz It needs an air supply

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 2,126 h, load capacity: 2,500 kg, lifting height: 3,450 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,350 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Hjdjz Sfrtspfx Akrjnu ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic/dual pedal Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: New Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: New Description: Handover with new maintenance & new FEM 4.004 inspection incl. inspection certificate. Like-new condition / incl. all original documents / operating manual / parts list / purchase invoice etc. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will gladly provide you with a quote for leasing & financing as well as delivery under favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing equipment from us. The stated operating hours were recorded at the time of the listing date. Subject to prior sale, changes and errors. Side shifter, integrated side shifter 3rd valve, work light rear, work light front, roof protection, windshield

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler - Flow-through oil cooler D20V D30V 2 Flow-through oil coolers - cooling system for machine cooling - individual sale possible. Two stand-alone flow-through oil coolers/circulation coolers from Wöhr Kältetechnik for cooling/temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11, and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow-through oil cooler, type D 20 V Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow-through oil cooler D 30 V Wöhr flow-through oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Price negotiable. Our asking price per unit is €1,950.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors/changes. We only sell to countries within the European Community. Hnedpfjg U H E Sjx Akreu

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 1,041 h, load capacity: 1,200 kg, lifting height: 3,200 mm, fuel type: diesel, mast type: duplex, construction height: 2,070 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Duplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Description: Hedpfx Aez Sv Iwekronu 3rd valve

Condition: used, Year of construction: 2021, operating hours: 5,697 h, Lower carriage NLC, track width 2390 mm Hedpfx Aez Sw T Ujkrjnu Tracks D7, 3-bar track shoes 600 mm, 50 links Radio Adjustable boom, 6.70 m Stick, 3.95 m Includes quick coupler SW48 Likufix

Condition: used, mileage: 102,811 km, power: 84 kW (114.21 HP), first registration: 06/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 7 m³, loading space length: 3,400 mm, loading space width: 2,000 mm, loading space height: 1,100 mm, Year of construction: 2019, Equipment: ABS, central locking, electronic stability program (ESP), SPRINTER 311 CDI ICE BUNKER vehicle, 10-door, with 9 compartments * Body: Carlsen Baltic, year 2018 + cooling temperature -38°C * Eutectic plate cooling system made of steel * Engine type: EURO 6 D + very well-maintained condition * Vehicle number for customer inquiries: 4837 * Environmental badge (green) * Two-seater * Electrically adjustable exterior mirrors * Electrically operated windows (2-way) * Maintained according to service schedule * Central locking with master key operation * 2/3-door No liability for printing and typographical errors Sale only to business customers Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase contract is binding. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Guarantee insurance possible upon request with the insurance company * TÜV/UVV LBW/Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Baden-Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * * ---- Visit us on our website at Hedpfsz Svtyox Akrsnu * Over 200 vehicles constantly in stock

Condition: good (used), Year of construction: 2015, Affeldt AVN E 350 D vertical flowpacker Automatic filling and closing machine for pillow bag. Closes the film with heat seal for (flat) pillow bags PP filmFilmholder up to 75 cmFall pipe circumference 44 cm.12,5 øMachine is suitable for printed filmDynacode printer Year: 2015Excluding discharge conveyor Hjdjz Rbl Ejpfx Akrsnu The tubular bag machine AVN E350 D is easy to integrate in existing facilities based on its slightly utility space and low height and additionally its optional range of packaging charges leads to a versatile usage of the machine. The AVN E350 D packs previously weighed or counted citrus fruits, onions, tomatoes, potatoes and similar products with effective output into bags. The menu-driven operating dialogue via touch panel, the free programmable control as well as the memory for different programs ensure an easy operation. The machines have been disassembled, we've made video's of the machines while in operation. The condition is used, but in good working condition. The machines will not be delivered refurbished. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2023, operating hours: 261 h, machine/vehicle number: HEI0009695, fuel type: diesel, motor manufacturer: Baudouin 12M26 G1000/5, General information Field of application: Construction Weights Empty weight: 18.000 kg Functional Generator capacity: 1.016 kVA Dimensions of cargo space: 1219 x 244 x 258 cm CE mark: yes Other information Fuel consumption: 145.2 Liter / Hour at 75% Load Generator: Mecc Alte ECO43 2SN Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Hjdpsyv Umksfx Akrsnu Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, mileage: 321,049 km, power: 162 kW (220.26 HP), first registration: 09/2014, fuel type: diesel, tire size: 285/70/19.5, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,350 mm, total width: 2,240 mm, total height: 2,200 mm, Year of construction: 2014, Equipment: ABS, electric window regulation, fog lights, = Additional options and accessories = - Aluminum fuel tank - Speed limiter - Rear doors - Air suspension - Radio/CD player - Side doors - Sun visor - Stability control - Digital tachograph = Further information = Tire size: 285/70/19.5 Brakes: Disc brakes Front axle: Suspension: Leaf spring suspension Rear axle: Suspension: Air suspension Hnsdpfxjz R Svcs Akreu Unladen weight: 6,620 kg Damage: None License plate: 1JEX565