Used Paolo Orizio Fi-Hn for sale (3,503)

Condition: used, functionality: limited functionality, machine/vehicle number: 11862780, Paolo Orizio S.p.A. single-sided circular knitting machine, model FI-HN, machine number 11862780. Made in Italy. NAMEPLATE DATA · Diameter: 30 inches · Gauge: 20 · Number of needles: 1860 · Number of feeders: 96 · Cylinder number: 1860253 · Needles: VO 15752 T02 / T03 / T04 · Sinkers: 209225000 · No CE marking 96 FEEDERS With 96 feeders in 30 inches, this machine has the highest feeder density in the lot. For the same diameter and gauge, a higher number of feeders translates into more production per revolution. APPLICATION Single-sided knitted fabric: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT · Warning panel: network connected, warnings, lighting, Rosen units, open door warning · Two-row counter with preselection · Complete upper fillet Njdozvm Nbopfx Aa Rjda LUBRICATION Oils indicated on the nameplate: IP Mellana 150 / Shell Full IP Gear Oil 72 for parts lubricated with oil and the variator; IP Athesia Grease EP2 / Shell Alvania EP2 for greased parts; IP Feltria 46 / Shell Vexilla 6 for needles and sinkers. CONDITION Machine partially disassembled: the cam plate and sinker ring are accessible without covers. Sold as is. An on-site inspection visit can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 108813364, Single-sided circular knitting machine by Paolo Orizio S.p.A., model JO/5, machine number 108813364. Made in Italy. PLATE DATA · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1860 · Number of feeders: 72 · Cylinder number: 04871290 · Needles: VO 15752 T02SA / T03SA / T04SA · Sinkers: L7 22601 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION Single-sided knitted fabric with 72 feeders: plain jersey, pique, fleece and derivatives for outerwear, sportswear and underwear. INSTALLED EQUIPMENT · Orizio MPF positive feeding system · Hole detector · Needle detector · Revolution counter and pre-selection · Open door warning · UNIWAVE mist lubricator · Complete upper butt · Fabric take-up with upper fan INCLUDED OPTIONS The machine panel indicates MPF-UNITS included and ROSEN-UNITS / HOLE-DETECTOR included. LUBRICATION Oil recommended on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION Complete and assembled machine. An on-site inspection and operational test can be arranged. Nodpfx Aajzvh Swo Roda DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1024610, Paolo Orizio S.p.A. small-diameter circular knitting machine, model TBE/C, machine number 1024610, year 1999. Made in Italy. CE marked. ORIZIO PLATE DATA: · Diameter: 15 inches · Needles per inch: 24 · Number of needles: 1120 · Number of feeders: 4 · Cylinder number: 3-9-286-A · Needles: VO 7950 G0011 · Year: 1999 · CE marking REBUILT BY CANMARTEX IN 2012. The machine has a second plate from CANMARTEX CATGRUP S.L. (Dosrius, Barcelona) with serial number OR610 and marking R2012, corresponding to its rebuilding in 2012. CANMARTEX manufactures circular knitting machines under the Jumberca brand and is located one hour from the current location, making technical service and spare parts still accessible. Njdpfx Aozvm Dxoa Reda CANMARTEX PLATE DATA: · Power: 5.5 kW · Frequency: 50/60 Hz · CE marking ORIZIO ELECTRICAL PLATE DATA: · Line voltage: 380 V, 3 phases · Frequency: 50/60 Hz · Full-load current: 16 A · Breaking power: 260 A APPLICATION: Small diameter with 4 feeders: cuffs, collars, ribbons, and finishing for knitted garments. POWER SUPPLY: 50/60 Hz. Both plates indicate 50/60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. EQUIPMENT: · Orizio touchscreen panel with "Yarn Storages" management · Igecom counter with USB port · Control column with start/stop buttons · Complete upper fillet LUBRICATION: Oil indicated on the plate: Optimol Optigear 5150 / Shell Omala 220. Oil change every 2,000 operating hours. CONDITION: Complete and assembled machine. A visit can be arranged for on-site inspection and operating test. DIMENSIONS AND TRANSPORT: · Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain Njdpfxezvm Uke Aa Reda

Year of construction: 2024, condition: like new (used), functionality: fully functional, The Emmegi Rifila is a miter saw with a blade that moves from below, specifically designed for the precise cutting of aluminum profiles and sheets. Its robust construction ensures exact cuts with perfectly parallel profile sides. The machine can be equipped with roller conveyors to enable flexible use. The saw includes 2 new roller conveyors (see photos). - Precise cuts due to the stable machine structure - Versatile for use with profiles and sheets - Safety through an effective protective cover - Easy operation with an adjustable stop and scale - Carbide-tipped saw blade, Ø 350 mm Njdeza Aafepfx Aa Reda - Max. after-cut height 120 mm - Protective device for the cutting area - Lubrication system with micro-spray device - Motor: Self-braking three-phase motor - Motor power: 1.5 kW - 2 roller conveyors

Condition: ready for operation (used), Year of construction: 2001, Pos. 1 BKGD-1100 Double band saw 1 pc. - Year of manufacture: 1987 - Made in Sweden - Working height: 1000 mm - Largest cutting height: 350 mm - Largest distance between saw blade and pressure side: 250 mm - Largest distance between the saw blade and the flare side: 250 mm - Smallest distance between the saw blades: 13 mm - Cutting width: 100-120 mm - Blade length: 6300 mm - Feed rate: 10-60 m/min - Motor power (saw): 2x18.5 kW - Motor power (pump): 4 kW - Firing speed: 680 1/min - Feed roller tiltable, max.: 45° - Hydraulic tank: 95 litres - Tank for cleaning fluid: 2x10 litres - Weight: 3000 kg Pos.2 Weinig E1 High-Mech feed magazine 1 pc. - Year of construction: 2001 - Feed max.: 80 m/min - Workpiece length: 1800-6100 mm - Workpiece width: 50 -230 mm - Workpiece thickness: 12-100 mm Pos.3. Weinig Hydromat 23 6 spindle planer/ profiling machine 1 pc. - Year of construction: 2001 - Working width: 230 mm - Working height: 160 mm - Play arrangement: • 1. bottom 11 kW 6000 1/ min (joint) • 2. right 7.5 kW 8000 1/ min • 3. left 7.5 kW 8000 1/min • 4. top 11 kW 6000 1/ min (joint) • 5. top 7.5 kW 6000 1/ min (joint) • 6. bottom 7.5 kW 6000 1/min (joint) - Feed rollers in the table: 3 pieces - Feed, max.: 60 m/min - Counter bearing: for 1st, 4th, 6th spindle Pos.4. pull-out magazine 1 pc. - Year of manufacture: 2018 - Hungarian manufacturer - Outfeed conveyor: 6000 mm (driven) - Cross belt: 5 rubber conveyor belt (driven) Pos. 5. Metron 05C 100/200 metal detector 1 pc. Pos.6. Weinig Rondamat 960 profile knife grinding machine 1 pc. - Year of construction: 2002 - Grinding of planing knives and profile knives - Grinding disc D: 150/225 mm - Grinding disc width: 2,3,4,10 mm - Grinding disc bore: 60 m - Grinding disc motor power: 1.1 kW - Grinding disc speed: 1700,2000,2400,3000 1/min - with cooling unit - Working width, max.: 240 mm Pos.7. Weinig OptiControl tool measuring and display system 1 pc. Pos. 8. Weinig setting gauge 1 pc. - for planer blade adjustment in the planer head Pos. 9. Weinig Hydro planing heads, profile heads, tongue and groove set - 27 pcs. Pos.10. BÖHL Junior S-450 VA wrapping machine 1 pc. - Year of construction: 2002 - Wrapping machine for profiles and long goods - Product dimensions: Ndjdpfx Aorqhggsa Roa • Width: 50-420 mm • Height: 20 -300 mm • Length: 1000 - infinite mm • Max. cross-section diagonal: 420 mm - PE stretch film thickness: 17-50 my - Roll diameter: 220 mm - Roll width: 125 mm - Feed rate: max. 20 m/min - Power: 3 kW - Infeed table - Outfeed table

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper Ndsdezgu Igjpfx Aa Rsa automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, Year of construction: 1970, power capacity 0 kW Nodpfeu Sbfdex Aa Rjda tool adaptor 0 total power requirement 0 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, mileage: 999 km, power: 4 kW (5.44 HP), first registration: 01/1995, fuel type: gasoline, color: orange, empty load weight: 180 kg, Year of construction: 1995, Beach cleaner: - Nolte Sandcleaning Technology - Delfino - own drive - Honda GX160 (5.5hp) - vibrating screen - collection container - dead man's switch - Adjustable cleaning depth (0-12cm) - Working width 75cm - Weight: 180kg - Machine dimensions: 86cm x 158cm x 87cm - Theoretical area performance: 2,500m²/hour - Year of construction: 1995 You can find a video of this offer on You can find our entire vehicle fleet at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale! Ndedeqxuf Aepfx Aa Rea

Condition: ready for operation (used), functionality: fully functional, Submitting a bid obligates you to collect the items on time by 31 December 2025! Ndodpsxyh Rhefx Aa Roa The offer includes: Web offset printing press with cutting unit Edelmann Graphics Webprint 48 Five (Serial No.: 6160-64, Year of manufacture: 2004) Sorting unit Edelmann Graphics HS (Serial No.: B-534, Year of manufacture: 2004) Extraction system incl. piping, frame Roll collator Rotatek Model RC2 (Serial No.: 007, Year of manufacture: 1994) Note: The green unit outside is not included in the system.

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Ndedpfxszvzu Ss Aa Rja

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: compressor, documentation/manual, Folding machine HD-FI 52 Nsdezrvipepfx Aa Reda 1 set of tools - 4 pockets 2 sets of tools - 4 pockets - 1 blade Scoring arm

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Ndjdpfey In Avox Aa Rsa Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Ndjdpey In Apofx Aa Roa Thin sheet loading: yes

Condition: excellent (used), functionality: fully functional, For sale: a meat grinder/sausage stuffer, Alexanderwerk HN 130 V2A, 380V, 6/7.8 kW, 2-speed, 16A. The machine has been inspected in the workshop and is ready for immediate use. Further details upon request. Payment in cash or by advance payment! Ndjdpezcw Ehsfx Aa Rea Sale only to commercial businesses; no guarantee, no warranty.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Nsdpfxszwac Rs Aa Rjda Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.

Condition: good (used), Professional SUHNER Rotofix workshop grinder equipped with a flexible working shaft. Robust industrial design intended for grinding, polishing, and metalworking. Njdpfx Aaey Uznfj Reda Device from the renowned SUHNER brand – manufactured in Germany/Switzerland. Technical condition: the device is fully functional. Visual condition: see photos – normal signs of use. Important: The grinder has cracks in the housing, visible in the photos. Additionally, one of the legs/mounting elements has been repaired previously. This does not affect the normal operation of the device – the equipment is functional and ready to use. Technical data: Manufacturer: SUHNER Model: Rotofix Motor: DKM 2 Power: 0.5 kW Power supply: 220/380V Rotational speed: 2800 rpm Frequency: 50 Hz cos φ 0.8 Protection class: IP41 Insulation class: E Included: SUHNER Rotofix grinder, flexible shaft, working end visible in the photos. Ideal for: metalworking workshop, polishing, grinding, metalworking, industrial and manufacturing tasks.

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Ndodpfx Ajzwfppoa Rea Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: Ndsdsx T Ah Djpfx Aa Roa - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, first registration: 07/2021, fuel type: diesel, overall weight: 2,955 kg, wheelbase: 3,098 mm, fuel: diesel, color: white, gearing type: mechanical, Equipment: ABS, AdBlue, Bluetooth, air conditioning, car registration, central locking, cruise control, onboard computer, power assisted steering, start-stop system, Special Features - 3 seats - Air conditioning - On-board computer - Electric mirror adjustment - Electronic immobilizer - Cruise control - Central locking system - Radio - Power steering - Reversing camera - Ladder rack - Anti-theft protection by RB-Locks Superstructure Aerial work platform Klubb KL 21B - Working height: 11.25 m - Outreach: 6.80 m - Rotation: 360° - Max. basket load: 120 kg - Basket dimensions: 86 x 72 x 110 cm - Boom: Telescopic - Drive: Electric - Engine start and stop from the basket - Emergency hydraulic pump - Control light for transport position in the cab - Hour meter Ndjdpfx Aey Nbgqoa Rea The Renault Trafic with KL21B aerial platform is particularly valued by municipalities, telecommunications providers, and signage companies due to its compact dimensions. The KL21B platform, with a working height of 11.25 m, was designed without outriggers and is fitted with a single-person basket. This allows for fast and safe on-site work, protecting both the operator and bystanders. The hydraulic pump is powered by an electric motor. All functions of the aerial platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German documents, TÜV (technical inspection), and UVV (accident prevention regulation) are included free of charge. Additional equipment such as a tow bar, lighting, shelving, and more are available upon request. Immediately available at our Langenfeld branch. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos taken in-house, ensuring full transparency regarding the actual vehicle condition. Prior to sale, our vehicles undergo comprehensive reconditioning in our own specialist workshop, including mechanical, bodywork, and paint. This ensures optimum preparation for the next technical inspection. We also guarantee the accuracy of the specified mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS, also as a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export plates - Tailored financing and leasing solutions - Trade-in of your current vehicle - Installation of special equipment as requested Looking for something specific? If you currently do not find a suitable vehicle for your business in our inventory, please contact us – we are happy to assist you further. For technical details, additional photos, or a personal consultation, we are always available. All prices quoted are net prices. The content of our website is created with the greatest care and is updated regularly. However, it is intended solely for general information and does not replace individual consultation. The details in the purchase contract are binding. Subject to change, errors, typos, and prior sale.

Condition: ready for operation (used), Fanuc A06B-6150-H075 Servo Amplifier , three housing covers are missing, see photo, used, minor signs of wear, 100% functional, scope of delivery according to photos Ndsdporlymqsfx Aa Roa

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Ndodpfx Aaezv Hzwj Rea

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, overall weight: 3,300 kg, input voltage: 400 V, For sale is a well-maintained CNC wire erosion machine, Charmilles Robofil 440 SL (CT-Millennium control), manufactured in 2002. The machine was used regularly in our production process and has been serviced accordingly. It is being sold due to capacity reasons. Travel ranges: X=550, Y=350mm, Z=400mm Max. workpiece dimensions: 1200mm x 700mm x 400mm Taper cutting device: 30 degrees Njdpfx Aaszvw Ibo Reda Wire spool capacity: 16/25 kg Work tank door with viewing window Water bath machine Automatic wire threading Includes wire aligner.

Condition: good (used), Year of construction: 2008, operating hours: 4,375 h, fuel type: diesel, JLG 600AJ Articulated Boom Lift / Working Platform, 20.46m Working Height, Deutz Diesel Engine, 2008 A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex Nuland. Njdpfx Aaezwgxxs Roda Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Nodpfxjynl N Se Aa Rjda lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg