Used Parpas Diamond Linear for sale (2,673)

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Gedpfx Asxxvp Nolxjub Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Year of construction: 2022, condition: used, OFFERS CONSIDERED PRIOR TO AUCTION Mini Linear Doypack 210 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, capable of 200g - 1kg Size Pouches, 1000kg in 1 Hour, capable of consistent weights within 2-3 grams depending on the product type. S/No. 22SDM004 (2022). Country of Origin: United Kingdom Guedpey Rzm Tjfx Alxeb Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2022, condition: used, OFFERS CONSIDERED PRIOR TO AUCTION Mini Linear Doypack 410 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, Capable of 5kg Size Pouches, 600kg in 15 Minutes, capable of consistent weights within 2-3 grams depending on the product type. S/No. 22SDM005 (2022). Country of Origin: United Kingdom Godpfx Aley Rzlvsxsub Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Gjdsxmhqzjpfx Alxsub Model: ABMC-1 Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Voltage: 380V (50Hz)

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 Gsdpfx Alsy I S Ivexsub ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Condition: used, Graver grinder PARPAS type AU make no. 854/36 year of construction 1971 grinding wheel diameter 100 mm grinding spindle speed approx. 3500 rpm. motor power approx. 0,55 kW Mains connection 380 Volt, 50 Hz - collet chuck (system DECKEL with S20x2) - collet chuck Ø 15,0 mm - Diamond grinding wheel dresser for grinding wheel end face Space requirement L x W x H 700 x 350 x 450 mm weight approx. 80 kg Guodpfx Asdzp T Tjlxsb good condition

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series 0-M, table load: 1,200 kg, overall weight: 13,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 15,000 W, tool weight: 15,000 g, number of axes: 3, This 3-axis Parpas P15 A was manufactured in 2009. It features a generous X-axis travel of 1,450 mm, Y-axis travel of 650 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1650 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Parpas P15 A vertical machining centre we have for sale. Contact us for further details. • Table: • Dimensions: 1650 x 700 mm • T-slots (width x number x pitch): 22 x 5 x 150 mm • Travels: • Distance spindle nose to table: 200–810 mm • Distance spindle center to column: 720 mm • Automatic tool changer: • Capacity: 24 positions • Max tool diameter: 110 mm • Max tool length: 300 mm • Tool holder type: CAT-50 / BT-50 • General: • Overall dimensions: 3,500 x 3,100 mm Guedpjyq Eapefx Alxsb Technical Specification Taper Size ISO 50

Year of construction: 2000, condition: ready for operation (used), number of axes: 2, This Parpas RUAP 700 was manufactured in 2000. A used cylindrical grinding machine, fully reconditioned and in excellent condition. Features include Siemens Sinumerik 840C control, 700 mm distance between centers, and a maximum workpiece diameter of Ø 360 mm. If you are looking to get high-quality grinding capabilities, consider the Parpas RUAP 700 machine we have for sale. Contact us for more information. • Status: Excellent • Control: Siemens Sinumerik 840C • Distance between centers: 700 mm • Center height: 185 mm • Maximum workpiece diameter: 360 mm • Maximum table travel (Z-axis): 820 mm • Table feed speed (Z-axis): 0–10 m/min • Maximum wheelhead travel (X-axis): 500 mm • Wheelhead feed speed (X-axis): 0–10 m/min • Max wheel size (left): 508 x 203 x 76 mm • Max facing wheel size (right): 450 x 127 x 50 mm • Wheel motor power: 10 hp • Workpiece spindle speed: 0–600 rpm • Wheel spindle speed: 0–2,880 rpm • Workpiece spindle taper: ISO 50 Gjdsygmg Nspfx Alxsub • Tailstock internal taper: Morse 4

Year of construction: 1989, condition: ready for operation (used), number of axes: 3, This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information. • Dimensions/Travel/Capacity: 3500 x 2000 x 1000 (units not specified) Gsdpjyca Irefx Alxsub • Note: Listing mentions “2 cast iron teams” (verbatim). Please confirm the correct term (e.g., beams/tables) for accuracy.

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Gedpfxeu U Ai He Alxoub

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec Godpfsxcg Evsx Alxjub tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, The used DIAMOND SJ 22 2-axis cnc lathe is a fast CNC lathe with an inclined bed and 2-axis flat guideways of medium size, and it is equipped with FANUC 0i-TC cnc, year of construction 2007, "CE" standard. Gsdpfx Alst N Upvexeub Main features: X-axis travel 280 mm Z-axis travel 360 mm 45 mm Spindle: max. rotational speed 6,000 rpm Spindle motor power 7.5Kw Stations on turret 12 pos. Hydraulic tailstock with in-cycle quill, chip conveyor evacuation conveyor, set of tool holders, 250mm 3-jaw chuck with related jaws, and user and maintenance manuals complete the equipment.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 22,710 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel distances X: 2,000 mm Y: 1,800 mm Z: 1,000 mm Table size: 1,000 x 1,000 mm Control unit Heidenhain iTNC640 Rotary table Table plate: 1,000 x 1,000 mm Max. rotational speed: 50 rpm Max. central table load: 3,500 kg Main spindle and milling heads Motor spindle Max. speed: 18,000 rpm Max. power: 37 kW Max. torque: 117 Nm Tool interface: FISK 63 A Lubrication/cooling: Oil/air mixture Coolant and chips Max. pressure: 50 bar Max. flow rate: 20 l/min Tool changer Tool positions: 84 Tool holder: HSK63A Tool diameter: 70 mm Tool length: 340 mm Tool weight: 6 kg Measuring Laser tool measurement: Metaster BLUM TC60 Pallet changer Max. pallet size: 1,000 x 1,000 mm Max. central loading: 3,000 kg MACHINE DETAILS Model: Parpas Roller XL Machine type: High-speed milling machine 5-axis machining Rotary table drive: Torque motor Gujdpfx Ajw Ngyzelxeb EQUIPMENT Direct measuring system for rotary table Hydraulically lockable milling head Coolant system with high-pressure pump and paper band filter Two screw conveyors for chips Slat band conveyor Automatic sliding door for pallet changing Interlocked access doors for depositing stations Tool breakage detection with laser tool measurement

Condition: used, functionality: fully functional, Koganei ORGA40X2750 Linear actuator. Godpfx Aljtwqqgexjub Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Hoerbiger Origa P120S-25 Linear actuator. Good working condition. Gusdpfx Ajtwqp Aslxob Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: SE.PH.A00.85, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS X-axis travel: 1,600 mm Y-axis travel: 1,200 mm Z-axis travel: 600 mm Axis feeds: 0 – 30,000 mm/min Spindle Tool holder: HSK A50 Speed range: 6,000 – 20,000 rpm Max. power: 15 kW Distances Table surface – floor: 920 mm Table surface – spindle nose: 810 mm Table surface – spindle nose: -15 – 585 mm Table Length: 1,320 mm Width: 800 mm Max. permissible load: 2,000 kg Number of T-slots: 4 T-slot width: 14 H7 T-slot center distance: 120 mm MACHINE DETAILS Length × Width × Height: 4,140 × 2,325 × 3,450 mm Gsdpfx Alewvi Sbexoub Weight: 9,500 kg Compressed air: 1,200 l/min Pressure: 6 bar

Condition: excellent (used), Year of construction: 2006, Travelling-column vertical machining centre with linear motor X-axis Control: Heidenhain iTNC 530 (3D path) Gujdpfx Aey Skmrjlxob Travels: X 2,500 mm / Y 920 mm / Z 820 mm Spindle: 20 – 18,000 rpm · HSK taper

Condition: excellent (used), Year of construction: 2003, operating hours: 7,600 h, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 rpm Gujdpfxjy Ry Txo Alxjb C-axis Max. bar capacity: 65 mm Travel: X = 260 mm, Z = 630 mm Turret with 12 stations (all driven, max. 4,500 rpm) Tailstock Tailstock travel: 580 mm Chip conveyor Dimensions (LxWxH): 3,500 x 2,440 x 2,100 mm (without chip conveyor) Weight: 6,000 kg Power-on hours: 32,600 h Spindle hours: 7,600 h

Condition: new, ZEATZ PHL Linear Rotary Tables – Rotary and Slide Tables – Available on Short Notice The ZEATZ PHL Linear series combines high-precision rotary table technology with an integrated linear axis, delivering maximum flexibility for complex machining applications. Ideal for positioning, simultaneous rotary operations, and interpolation machining of large and heavy workpieces. Your advantages at a glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Integration into existing machines (CNC controls: HEIDENHAIN / SIEMENS / FANUC) ✔ Service & technical support directly via JMT ✔ Custom designs and application-specific solutions Why ZEATZ: ZEATZ stands for high-precision NC rotary tables and innovative solutions for demanding machining tasks. With a robust design, backlash-free drive systems, and state-of-the-art control technology, these systems are ideal for heavy-duty machining and applications requiring the highest accuracy. Technical features: Applications: Positioning | Simultaneous Turning | Interpolated Machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (Round clamping surfaces also available) Max. workpiece weight: Approx. 6,000 to 80,000 kg Linear axis: Optional integrated sliding axis Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: Guodpfx Aljm Tv Azoxob ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controllers Your benefits as a JMT customer: ✔ Official sales partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available in Germany Contact us – we are happy to advise and provide you with a customized offer.

Condition: used, Year of construction: 2018, operating hours: 25,500 h, functionality: fully functional, machine/vehicle number: 12630000523, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC460, overall weight: 14,100 kg, Equipment: chip conveyor, We are offering this used DMG MORI DMC 80 H horizontal machining center, year of manufacture 2018. Type: DMC 80 H linear Serial number: 12630000523 Year of manufacture: 2018 Maximum spindle speed: 12,000 rpm HSK-A100 torque: 430 Nm NC rotary tilting table for 5-axis machining B-axis: 360° A-axis: 25°/-200° 2-station pallet changer Tool magazine with 183 positions (3 wheels) Operator panel for loading station Production package Heidenhain TS649 touch probe Tool breakage monitoring 3D quickSet MPC machine protection control Coolant system with 980l / 80 bar through-spindle coolant (IKZ) 10 additional T-slot pallets 630x630 mm Machine weight: 14,100 kg Tool holders and accessories by arrangement Available at short notice, dismantling and loading by arrangement Gedsy R Ra Nepfx Alxoub If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Guodpjy Sak Hjfx Alxeb Technical data and details are subject to change and error. Prior sale reserved!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – TOP Condition Technical Data: >> Year of manufacture: 2006 >> Control: Heidenhain iTNC 530 >> Travel (X/Y/Z): 500 / 450 / 400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable in X, Y, Z: up to 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 tool positions >> Clamping surface: Ø 500 x 380 mm Gujdpfx Aley R Dgpjxob Distance between T-slots: 63 / 14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control panel and accessories Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> High-pressure coolant supply (IKZ) 40 bar >> Coolant purification system (fleece filter system) >> Rinse gun >> Visiport >> Measuring system with air purge >> Prepared for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all cooling and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers etc. fully cleaned. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle has been overhauled (exchange spindle), fully serviced, and an acceptance protocol is available. Invoices for the overhaul totaling €42,000 (net) are available. You are welcome to view and test the machine under power at our premises.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min Gusdpjy Nyrxefx Alxob X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 Gedpfx Asy Nyg Aolxoub If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), functionality: fully functional, machine/vehicle number: 142005, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 300 kg, total width: 700 mm, total length: 750 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Spiral Mixer – Dough Machine Erka Model: HK 30 for approx.: max. 30 kg dough 2 speeds Machine is mobile Connection: 400V, 16A-CEE plug Used machine Gedewmvx Ajpfx Alxeub We have more spiral mixers in stock!