Used Pb Pb S 100-12 Ec for sale (95,989)

Condition: used, fuel type: electric, Year of manufacture: 2015 Nodpfx Aszzlxlji Town Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Nwsdpfeygtzyox Ai Ten

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm Nodolqac Sopfx Ai Town workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Nedpfx Aioz Ef N Ao Tswn Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-milling cutter 10 face milling operations 4 chamfering operations Nsdpfezpy Drox Ai Tjwn 2 water break grooves Calibration support Belt feed direction from left to right Deburring cutter Unit for water break grooves from above and below Can grind 9 profiles – e.g., bullnose, full round, half round, small rounding on the top and bottom, chamfered, quarter round.

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes MAZAK QUICK TURN SMART 100 S Machine type: CNC Horizontal Turning Machine Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Nwodpjz Hdx Sofx Ai Ten Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Nsdezv Rz Uspfx Ai Tewn Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Machine is unused and in its original packaging. Nedpfx Ajz Egy Aei Town

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW - Transport blower (vacuum): 1.1 kW Nwsdpfx As Ad Ey Eei Tjn - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm - Weight: 324 kg Features: - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0398 (036), STAR Micronics ECAS-12 Manufacturer: STAR Micronics, Japan Year of manufacture: 2007 Control system: Siemens 840 Machine type: CNC long-bed turning center Technical data STAR Micronics ECAS-12, year of manufacture 2007 CNC long-bed turning center Control system: Siemens 840Di Max. turning diameter: 13 mm Spindle stroke: 205 mm CNC axes: 10 Main spindle speed: 12,000 rpm Counter spindle speed: 12,000 rpm Spindle power: approx. 3.7 kW each Driven tools up to 8,000 rpm Drilling diameter max. 10 mm Milling diameter max. 10 mm Thread cutting up to M8 Rapid traverse: 18 m/min Nedpfx Ae Aarq Aei Town Connection power: 8 kVA Weight: approx. 3,500 kg Dimensions: 2,590 x 1,140 x 1,830 mm

Condition: new, Year of construction: 2023, Technical data: - Number of furrows: 5 - Frame profile 120 x 200 x 6.4 mm (turntable 300) - Frame height 80 cm - Body longitudinal spacing 100 cm - Expandable by one body, max. number of furrows 6 Standard equipment: - Variomat - Stepless adjustment of working width: 30 - 55 cm (12 - 22 inches) - Overload protection by leaf spring(s) - Standard 6 leaf springs - Double-acting hydraulic rotation - Mechanical adjustment of the front furrow - Turntable 300 with open swivel shaft Ø 150 mm, incl. memory cylinder and swivel head lock 10 Body No. 28 5 2nd strut, body 28 10 Extra charge for Quick fit per body 5 XHD spring (8 leaf springs) 1 Mech. side adjustment Vario for DW 300 1 Oil filter DW 300 1 Memory with follow-up EG/LB300, lower 1 Disc harrow 500mm, toothed, pair 5 Corn insert, pair (centrally adjustable) 1 Swiveling turntable (mechanical) 1 Wheel 420/55-17.5 (mechanical) 1 Packomat 1 S-arm 3-5 shares 1 Mounting parts Packomat DW300 1 Hydraulic with joystick 1 Roller 2.8m, 600mm diameter 1 Front harrow 20mm, 2.8m Nwjdpfx Ais Afkwle Tjn

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13 Nwodpfxeum H Ekj Ai Ten

Condition: good (used), functionality: fully functional, PYE 100 S/1M hydraulic press Njdpfx Aio Afbvle Tjwn

Condition: used, Year of construction: 2007, functionality: fully functional, STAR MICRONICS ECAS-12 CNC SWISS-TYPE AUTOMATIC LATHE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-12 Type: 570 Year of manufacture: 2007 Serial/Lot number: 0398 (036) Machine type: CNC sliding-headstock / Swiss-type automatic lathe CNC control: Siemens 840Di Number of controlled axes: 10 Main and counter spindle: Yes C-axis on main and counter spindle: Yes TECHNICAL DATA Nwodpfxozxhz Ds Ai Tsn Maximum machining diameter: 13 mm Maximum headstock stroke: 205 mm Maximum stationary drilling diameter: 10 mm Maximum driven-tool drilling diameter: 8 mm Maximum stationary tapping capacity: M8 × P1.25 Maximum driven-tool tapping capacity: M6 × P1.0 Maximum milling diameter: 10 mm Maximum die-cutting capacity: M8 × P1.25 Maximum slotting capacity: 1.5 × 4 mm MAIN SPINDLE Maximum spindle speed: 12,000 rpm Minimum C-axis indexing increment: 0.01° Main spindle motor output: Approximately 3.7 kW / 5 hp COUNTER SPINDLE Maximum clamping diameter: 13 mm Maximum counter-spindle speed: 12,000 rpm Minimum C-axis indexing increment: 0.01° Counter-spindle motor output: Approximately 3.7 kW / 5 hp Number of counter-spindle tool positions: 4 DRIVEN TOOLING Maximum driven-tool speed: 8,000 rpm Driven-tool motor output: Approximately 0.75 kW / 1 hp Powered cross-working and rear-working tool stations AXES AND FEED RATES Linear axes: X1, Y1, Z1, X2, Z2, X3, Y3 and Z3 Rotary axes: C1 and C2 Maximum rapid traverse on linear axes: 18,000 mm/min Maximum rotary-axis feed: 194,400°/min Minimum programmable linear increment: 0.001 mm Minimum programmable C-axis increment: 0.001° ELECTRICAL DATA Operating voltage: AC 200 V Power supply: Three-phase Frequency: 50/60 Hz Connected load: 8.0 kVA DIMENSIONS AND WEIGHT Approximate machine dimensions: 2,590 × 1,140 × 1,830 mm Machine weight: 3,500 kg Dimensions exclude the bar feeder and peripheral equipment.

Condition: good (used), Year of construction: 2006, power: 3 kW (4.08 HP), Zentner Soltec Screen Washing Unit ST 100 Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of manufacture: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Nodpfx Aeyrndgei Tswn Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Enclosed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Special features: – EX safety signs present – Integrated exhaust/ventilation system – Compact design with separate control cabinet Location: Schierling Viewing possible by appointment.

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V Nodsxcg Evjpfx Ai Tjwn total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: repair required (used), Year of construction: 1989, functionality: not functional, Michael Deckel S 12 M tool grinding machine. The machine has an electrical problem, error on the display. Otherwise in good condition. Accessories: grinding wheel holders, operating manuals. Nwedpfxsx Nclus Ai Tsn

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive CIP Cups, Cleaning fluid can be recycled Nsdpex A U Ursfx Ai Tjwn Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, input voltage: 230 V, total length: 5,000 mm, total width: 5,000 mm, total height: 2,100 mm, Equipment: documentation/manual, MHM S-Type Plus 12/10 Screen Printing Machine with 2 Flash Stations Price: €23,000 (Negotiable) Year of manufacture: 2012 Condition: Excellent. Used in the past 2 years for only a few hours per week. Flash Units: Includes 2 flash stations (one purchased new in 2019) Maintenance: Off-contact cylinders replaced with genuine MHM parts on 4 stations (as shown in the pictures) Pallets: Equipped with 4 sets of original MHM honeycomb pallets in excellent condition. Sizes included: 13 cm, 26 cm, 32 cm, and 45 cm. Storage Racks: Includes 3 stainless steel mobile racks on wheels: 1 specialized squeegee and floodbar storage rack (as shown in the photo) 1 pallet storage rack 1 screen frame storage rack Nwodpfxjy Tzbco Ai Tjn Laser Guides: Equipped with 3 laser guide systems. Packaging and installation available upon request.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Nwsdezmh R Iepfx Ai Ton Weather-resistant due to corrosion-resistant coating

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Njdpfxez Ipi So Ai Town Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2024, machine/vehicle number: 0-341-87-0182, operating hours: 1,354 h, total length: 6,080 mm, total width: 4,950 mm, total height: 1,940 mm, Used panel saw, available for inspection while in operation. ▪️Labeling software ▪️Manual label printer Nedpfxszu Nyts Ai Town ▪️Stress-free cutting/ripping program (cutting cycles, stress elimination, reduced waste) ▪️tapio ready Transportation is the responsibility of the buyer.

Condition: new, Year of construction: 2024, Demonstration machine used Technical data: - Number of furrows: 4 - Frame profile: 100 x 200 x 6.4 mm - Frame height: 80 cm - Body spacing: 100 cm - Extendable by one body - Rotary unit 200: suitable for tractor power from 110/150 (kW/HP) max. tractor power 177/240 (kW/HP) - Packomat optional Standard equipment: - Variomat - Stepless adjustment of working width 30-55 cm (12"-22") Nedpfj Afiq Rox Ai Tjwn - Overload protection by leaf spring (S) - standard 6 leaf springs - Double-acting hydraulic rotation - Mechanical adjustment of the front furrow - Body 28 with working width of 16" or 18" and plough share - Rotary unit 200 with open rotary shaft ø 120 mm including memory cylinder 320/60-12 support and transport wheel, pneumatic 1 rear-mounted 1 Square support axle Cat. III for rotary unit 200 4 Maize insert, pair (centrally adjustable) 1 Disc harrow 500 mm toothed, pair Additional cost for HD leaf spring package per body pair 4 (7 leaf springs - 1,270 kg) 4 Quick-FitTM quick-change nozzle, pair Packomat 3/4 1 Working width 2.40 m, 12 rings, weight 1,150 kg, ring diameter 600 mm, ring spacing 200 mm Front harrow with 20 mm spring tines 1 Knife share with Packomat 1 Additional rear harrow Packoma

Condition: used, Euromac PB 350S Horizontal bending machines Euromac horizontal bending machine. with related equipment. serial number 90/52901/12, Oct 1990. With large amount of tooling as shown in images below. Nsdpfx Aezh Rf Dei Town

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL Nwedpfxjwfdbce Ai Tsn R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, tumbling, and blasting technology.