Used Pentax Ch50-160B for sale (81)

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: CH50-160B, overall weight: 40 kg, total length: 500 mm, total width: 300 mm, total height: 300 mm, volume flow: 50 m³/h, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, type of input current: AC, type of cooling: air, rotational speed (max.): 2,900 rpm, protection type (IP code): IP55, The pump is unused and in new condition. There are 2 units available. Ndsdpfx Ajy Uc Umjgrob

Condition: used, Year of construction: 2016, turning diameter 300 mm turning length 284 mm control Fanuc Ndedszyvbzjpfx Agrjb x-axis 170 mm z-travel 335 mm weight of the machine ca. 3200 kg

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Nedszd Tycspfx Agredb Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Ndjdpfxoy D N Dao Agrob Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: new, Year of construction: 2018, functionality: fully functional, CHILLER – AS GOOD AS NEW!!! Manufacturer: Piovan Type: Aquatech CH50 Year of manufacture: 2018 Connection power: 4.1 kW Cooling capacity: 7 kW Ndjdpfx Ajwc I S Tegrjb Refrigerant: R407C The unit is practically new – only used for testing! PRICE REDUCED FROM 4250 TO 3650 EUR

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 Nodpfxswthbio Agrsdb >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm Nodpfx Agsvrdlcsrodb >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 3232, working width: 1,500 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, For sale is a MicroStep CNC cutting system from the MG series, model MG 6001.15PrkGB+CH500P, manufactured in 2022, with approximately 2,000 operating hours. Equipment: - Plasma rotator for weld preparation with Kjellberg Q 3000 plasma power source - Fully automatic oxy-fuel support - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Pipe cutting device RSV 30-300 - Filter system TEKA ZPF 6H with 11 kW Technical data: Working area approx. 6,000 x 1,500 mm + 500 mm clearance Max. travel height approx. 150 mm Max. table load approx. 100 mm Guideways in the X-axis: Linear guideways with helical gear racks Drives: Digital, maintenance-free AC servo motors with IRC Positioning speed up to 40,000 mm/min. Positioning accuracy ≤ 0.06 mm/m Bidirectional repeatability 0.05 mm/m Inspection: An inspection is possible at the location in Wörth a. d. Isar. Interested? Nodpfx Aez A Tk Nsgredb The machine is offered in an online auction. Further information and documents are available upon request. Simply contact us!

Condition: used, Rexroth Industrial Hydraulic Power Unit, 10 Valves, 100-160 Bar, Used machine Manufacturer: Rexroth Electric motor manufacturer, type: Brook Hansen, WU-DA132SJ Electric power: 5.5 kW (1450 RPM, 380-415V) Condition: Used, industrial execution Overall dimensions: 1100 x 780 x 1380 mm Installation dimensions: 790 x 580 x 380 mm (approx. 170 liters) Technical and operating parameters: Ndedpfx Aoz Dqxtogrsb Operating pressure: 100 bar Maximum pressure: 160 bar Valve manifold assembly: 10 pcs Rexroth directional valves (M-R900561278 4WE6E62, EG24N9K4) Hydraulic accumulator: 50 bar pre-charge pressure hydraulic accumulator Valve actuation: 24V DC solenoid operation Design, Operation: Heavy-duty premium Rexroth hydraulic power unit powered by a 5.5 kW Brook Hansen electric motor. Features an integrated manifold block with 10 Rexroth 4WE6 directional control valves and a 50 bar hydraulic accumulator for pressure stabilization and system energy storage. Suitable Application Areas: Hydraulic supply for industrial presses, bending machines, and custom machinery. Multi-actuator hydraulic systems controlling several cylinders or hydraulic motors. Central hydraulic power unit for automated production lines and machine tools.

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Ndjdpfxju H U S He Agrob Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Year of construction: 2004, condition: used, Serial number: T5845513506 Capacity 6800 l/h Inlet pressure 3-10 bar Weight approximately 1365 kg LxWxH 1300x1350x1300 Note! Outgoing pipework not included Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Njdpfx Agez Au Sqoredb

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4 Ndjdozt Ih Tjpfx Agreb

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Manufacturer: ASJ Type: J53-160B Ndsdexpf U Ajpfx Agreb Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Weight: 8190 kg Table size: 560 × 510 mm Clear opening without table: 560 × 560 mm Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm

Condition: used, Year of construction: 2004, operating hours: 4,200 h, Equipment: all wheel drive, MAKE: VOLVO TYPE: EW160B YEAR: 2004 CE MARKED: YES OPERATING HOURS: 4200 HOURS (ORIGINAL) TIRES/UNDERCARRIAGE: 60%-10% POWER: 103KW ENGINE: VOLVO D6D-EJE 2 WEIGHT: 16200KG Nodpfx Aszmk S Uegrjdb OPTIONS: 16,200 KG OPERATING WEIGHT HYDRAULIC QUICK COUPLER HYDRAULIC TILT BUCKET AIR CONDITIONING BLADE HAMMER HYDRAULIC LINES SORTING FUNCTION ORIGINAL HOURS!!! FULLY EQUIPPED KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: good (used), Year of construction: 2006, functionality: fully functional, Leadwell horizontal machining center Model: LCH-500 Ndsdpfx Asz An Ursgrsb Year: 2006 Table size: 500 x 500 mm Control unit: Fanuc O-i MC X-axis travel: 700 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Maximum spindle speed: 10,000 rpm Spindle connection: ISO 40 Spindle power: 18.5 kW Chip conveyor (belt type) Pallet changer High-pressure system at 20 bar through the spindle

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm Ndedpfx Aszwcn Negreb 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 22100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 Nedpsyxxygsfx Agrsdb 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,500 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details. • Swing over bed 550 mm • Maximum spindle speed 4500 rpm • Travels x-170 mm, z-335 mm • 12 tool positions Technical Specification Nsdpfxszwxz Sj Agrjdb Counter Spindle No Driven Tools Yes

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Njdpfx Agsin Edwerjdb Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Njdey Sak Tepfx Agredb Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Njdpjzy Ngqjfx Agrjdb Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 698 CSX ECO HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 698 CSX Power supply voltage (V): 400 ~ 3 phase Performance discharge (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (C): 80-155 Connection power [kW]: 4.5 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 20 Weight (kg): 96 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M Ndjdpfsztzhyjx Agreb NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and intuitive control panel Control The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 698 CSX HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 698 CSX Power supply voltage (V): 400 ~ 3 phase Performance discharge (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (C): 80-155 Connection power [kW]: 4.5 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 20 Weight (kg): 96 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Ndsdpfx Agozl Rqborsb KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and intuitive control panel Control The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: reconditioned (used), functionality: fully functional, pressure: 160 bar, input voltage: 400 V, overall weight: 140 kg, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-49 X HOT WATER PRESSURE WASHER Nodpfxjz Egq Is Agrodb BUILT-IN HOSE REEL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. Double lance with two nozzles makes a pressure regulation possible A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features individually taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6.9 Detergent tank [l]: 10 Hose length [m]: 20 Weight [kg]: 140 EQUIPMENT: Built-in hose reel NEW heavy-duty spray gun (German brand R+M) NEW double lance with pressure setting NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: like new (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 45 mm, Engel Victory 500/110 Tech Horizontal injection moulding machine with 110 tons clamping force, brand Engel, model Victory 500/110 Tech. Year of manufacture: 2004. Approx. 69,000 automatic operating hours. Includes a fully equipped production cell: ENGEL ERC 43/1-EA Robot (2004), conveyor belt, and safety fencing. The injection moulding machine is delivered RE-conditioned by our expert technical team and in optimal working condition. We can offer our customers on-site commissioning service, ensuring proper machine operation upon installation completion. Technical Details: Screw diameter: 45 mm Ndjdpfx Agsw Hbiajrsb Year of manufacture: 2004 Operating hours: 69,000 Opening stroke: 507 mm Injection volume: 318 cm³ Injection pressure: 1016/(1603 increased) bar Maximum distance between platens: 800 mm Minimum/Maximum mould thickness: 300 mm (min) / 500 mm (max) Platen dimensions: 740x680 mm