Used Pers Group Single-Stage Parts Cleaning Machine for sale (89,415)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Csdpfxovvuzcj Aipjrc Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm Cedpfjn Nyt Hsx Aiporc loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Codpfx Aisudz D Uspsrc Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, Description Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The soiled parts are radiated intensively with the hot lye from all sides with a uniform rotation of the motor-driven basket. After completing the cleaning process, the device switches off automatically. Advantage 1 pump arranged horizontally 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, sprocket drive via separate motor intake filter in front of the pump shaft high injection pressure steam extraction stainless steel screen with filter basket water indicator Credpfx Aehvzy Aeipjc Technical data Tank capacity 85 l Basket diameter 780 mm Capacity 150 kg Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1130x1010/1220x1150/1730 mm Weight 90 kg Heizleistung 4 kW Spray rate 4800 l/h Material Stainless steel Power supply 4,8 kW/ 400 V/ 50 Hz Pumpendruck 3,1 bar

Year of construction: 2025, condition: new, functionality: fully functional, load capacity: 75 kg, The Wave 450 parts cleaning unit is a very flexible vacuum assisted degreasing machine able to perform an high degree of parts decontamination. All the operations such degreasing cycle as spray, immersion jets, ultrasonic, as well the distillation and filtration process and parts drying treatment are sequenced in automatic way and in a total vacuum ambient. Codpfx Aijwc Sdaoperc The Wave 450 machine can operate with: Modified Alcohol solvents (MA) / Hydrocarbons Class III (H-III) / Chlorinated (PER) Those solvents are specifically used when the demand calls for a strong degreasing phase, evaporate completely without leaving debris residues on the processed parts. Standard features  Continuous solvent distillation  Full solvent distillation  Sludge stripping 2nd distiller Oil/solvent separation  Full solvent filtration at each cycle  Chip drying and deodorizing before emptying by the operator  Chip drying and deodorizing before opening / cleaning by the operator  Vacuum / solvent charging - discharging system  Water/solvent separation Distillation The distillation of the solvent enalble to maintain unchanged the degreasing power of the solvent. All our systems offer the double stage distiller as standard, guaranteeing the separation between solvent and oils, further expulsion of water takes place in the water separator. PLC S7 and HMI 12" Siemens are a standard feature The machine is compliant to Industry 4.0 and so Industry 5.0. Basket dimension is: mm 480 x 300 x 200 H

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Codpowdfyqefx Aipjrc Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Codpfx Aiex Exuqeperc Maintenance and inspection hatches for wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Crjdpfxsnl Ekro Aipoc Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Condition: used, Wigo Double squaring machine with 3 groups per side, complete with inverters. - right and left circular saw - right and left cutter - right and left cutter Cedsummldspfx Aiporc Max working width: mm. 1500 Engine power: Circular saws: 3KW X2 Toupie Milling Machines: 5.5kw x2 Rotary Sanders: 5.5kW x2 Feed motor: 4KW Shoulder width adjustment motor: 3KW

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Technical condition: good Crsdpfxjukrcpj Aipsc Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm

Condition: used, Year of construction: 2018, operating hours: 648 h, functionality: fully functional, machine/vehicle number: HR12952, fuel type: diesel, empty load weight: 922 kg, total length: 2,000 mm, construction height: 1,400 mm, drive type: Diesel, construction width: 1,260 mm, Sweeping suction machine Codpfxjxnt Tko Aiporc Chassis number: HR12952 Condition: Ready for use and fully functional Technical condition: normal Description: Equipment: Front lighting, rubber bumper kit, sweeping roller PPL/wire, side brushes PPL/wire mix, power steering. Machine fully workshop-tested, cleaned, with new UVV inspection and maintenance completed.

Year of construction: 2017, operating hours: 14,932 h, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Crodpjy U Hkxjfx Aipec Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2010, operating hours: 942 h, functionality: fully functional, machine/vehicle number: 103BS00103/00, fuel type: gas, empty load weight: 1,290 kg, drive type: Treibgas, sweeping width: 1,000 mm, Sweeper-suction machine Chassis number: 103BS00103/00 Condition: Ready for operation and fully functional Technical condition: normal Cjdpfx Aijy Hmx Hsporc

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 16803, fuel type: electric, empty load weight: 750 kg, total length: 1,810 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,225 mm, sweeping width: 1,000 mm, Sweeper-scrubber machine Chassis number: 16803 Condition: As new Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: Hoppecke Aquamatic Battery type: PzS Battery year: 2024 Battery condition: 80 - 100% Description: 1,000 mm working width, 6,000 m²/h surface performance, 120 l container capacity, hydraulic high dump, round filter, automatic filter cleaning, 3.5 h battery runtime, right-hand side brush, gradeability 12%, working speed 6 km/h, suitable for indoor and outdoor use. Credpfx Aeyytixjipsc

Condition: new, functionality: fully functional, Year of construction: 2026, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeping and vacuuming machine Condition: New device Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Battery type: Gel Battery year: 2024 Battery condition: 80 - 100% Csdorqqv Hjpfx Aipsrc Description: New device with 12 months warranty

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeping and suction machine Condition: New unit Technical condition: New Battery voltage: 24V Battery type: Lithium-ion Battery year: 2024 Battery condition: 80 - 100% Crsdpsxmb Slofx Aipec Description: New unit with 12-month warranty, water spray system for side brushes, warning beacon.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Cjdpfxsdzqlto Aiperc Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Year of construction: 2011, operating hours: 762 h, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeper-scrubber machine Condition: Refurbished without warranty Technical condition: Very good Battery voltage: 24V Credpfjxl H Uvox Aipec Battery capacity: 240Ah Battery type: Gel Battery condition: 60 - 80% Description: The machine has been workshop tested, passed new UVV inspection, all sweeping rollers and brushes are new, with warning beacon.

Condition: used, operating hours: 3,163 h, fuel type: diesel, fuel: diesel, HAKO Automatic Cleaner and Vacuum Cleaner Name: HAKO JONAS 1450 D Power: Diesel Condition: OK, see photos Used features (please call for any defects) Battery is fully charged Large collection basket with discharge container / hydraulic Brush replaced Item No.: 1450 D Manufacturer: HAKO Year of manufacture: see photo - looks good Operating hour meter reads "3163" 2 brushes Fuel: Diesel Price quoted upon pickup from warehouse 47441 Moers Various cleaning and scrubbing machines in stock We offer as shown. Crsdpfx Aewffaaeipoc Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on distance.) All dimensions are approximate.

Condition: used, Year of construction: 2017, operating hours: 89 h, functionality: fully functional, machine/vehicle number: U02424, fuel type: electric, construction height: 1,100 mm, drive type: Elektro, sweeping width: 900 mm, Vacuum sweeper VIN: U02424 Technical condition: very good Battery voltage: 36V Battery Ah: 210Ah Battery type: Gel Credowlwfhopfx Aipec Battery year of manufacture: 2025 Battery condition: New Description: Tennant 6100 No.: R0570 Year of manufacture: 2017 Operating hours: 89 Easy to use 970 mm working width 560 mm main brush length 970 mm working width Maintenance-free battery 36 V / 210 Ah External charger 90 kg debris hopper Easy to empty Battery runtime up to 3.4 hours Weight including battery: 503 kg Up to 3,270 m² area performance per hour Multi-stage filter system The machine is in very good visual and technical condition. Fast and uncomplicated transport is possible upon request! The advertisement is for identification purposes only. A detailed description of the condition and possible equipment is available upon request! Errors and prior sale excepted. Sale to commercial customers only. All sales of used goods are made without warranty or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, Year of construction: 2013, operating hours: 925 h, functionality: fully functional, machine/vehicle number: 090EH00303/00, fuel type: electric, construction height: 2,100 mm, drive type: Elektro, sweeping width: 1,470 mm, Sweeper/Scrubber Machine Chassis Number: 090EH00303/00 Condition: Operational and fully functional Technical Condition: Good Crjdpfoxd Idvjx Aipec Description: Dulevo 90 EH, Ref.: R0602, Year of manufacture: 2013, Operating hours: 925. The machine is in good optical and technical condition. Battery charger available on request. Fast and uncomplicated transport can be arranged by agreement! This advertisement serves solely for identification of the machine. A detailed description of the condition and possible equipment is provided upon individual request! Errors and prior sale excepted, sale only to businesses. All sales of used equipment are made under exclusion of warranty and/or guarantee. If you haven't found the right machine, please contact us. We have a large selection of additional machines available on site.

Condition: used, Year of construction: 2018, operating hours: 237 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Sweeper-scrubber machine Condition: Ready for use and fully functional Technical condition: good Battery voltage: 36V Credpfxsxa S Rro Aipjc

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250106, warranty duration: 12 months, total width: 685 mm, total height: 1,665 mm, total length: 1,000 mm, type of input current: AC, overall weight: 350 kg, inner dimension width: 520 mm, inner dimension length: 750 mm, inner dimension height: 660 mm, input voltage: 230 V, Equipment: cabin, documentation/manual, lighting, Compact, front-operated, semi-automatic 2-in-1 blasting cabinet made in Denmark with removable drum for blasting small to medium-sized workpieces / 3D printed components. - You save time, air and energy. - Flexible adaptation to the shape of the workpiece. - Eliminates tedious manual work. - Eliminates bottlenecks in production. - Easy and simple operation due to semi-automatic operation. The integrated rotating drum can continuously and automatically remove plastic or metal particles from small parts after printing. The nozzle can be started automatically when the drum is rotating. After cleaning the parts, clean compressed air can be blown in to remove the residual dust from the parts. The drum itself can be easily and quickly removed for filling or emptying. For manual blasting, the drum is removed and the entire blasting chamber can be freely operated using a foot pedal. - Professional compact blasting cabin - 1 large swing door with safety door switch - Safety glass, replaceable glass pane - Rubber coating on the inner side walls - Integrated cabin interior lighting - Stable nozzle holder - Nozzle(s) made of tungsten carbide Csdovvmaqjpfx Aiperc - Foot switch for manual blasting - Pressure gauge and pressure regulator

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G01747, Turning diameter over bed : 500 mm Turning diameter over slide : 280 mm Workpiece length : 2000 mm X-axis travel range : 280 mm Z axis travel range : 1935 mm Rotation speed : 3000 rpm/min Spindle tip : A2-8 Spindle flight : 82mm X / Z accelerated feed : 4/6 m/min Tailstock sleeve diameter : 75 mm Tailstock taper : MT5 Main spindle motor : 11/15 kW Tool shank size : 25x25 mm Crodpfx Aevfdiuoipec Tailstock step : 150 mm Positioning accuracy of the X/Z axis (C, Y) : 0,018/0,021 mm Repeatability accuracy of the X/Z axis (C, Y) : 0,014 mm Weight : 2800 kg

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V Crodpfx Ajt Ity Djipoc