Used Piccinotti Brake Drum Grinding Machine for sale (81,887)

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 800 - 320 mm grinding depth: 380 mm dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm feed:: 0,05 - 0,40 U/min / 8 step U/min total power requirement: ca. 1,1 kW weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm Iijdpfx Asu Ngauoh Asd - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Iisdpfx Asyw Rhmsh Asd Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 1,700 kg, Equipment: documentation/manual, Universal machine COMEC RCG 900 for reconditioning cylinder heads, engine blocks, drums, and discs for cars and trucks. Planing width: 320 mm Planing length: 900 mm Maximum working height: 370 mm Maximum table travel: 1200 mm Feed rate: 0.8 - 450 mm/min Maximum brake drum diameter: 1400 mm Head motor: 5.5 Hp Brake machining speeds: 35-70-50-100 rpm Approximate weight with accessories: 1700 kg Dimensions: 2300 x 790 x 1700 mm (h) Iisdpfxey Rffys Ah Aod

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Iedpevugf Rsfx Ah Asid Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm total power requirement: ca. 1,1 kW feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm Iiedpju Ngciofx Ah Aed - operation via control panel *

Condition: new, Year of construction: 2026, functionality: fully functional, Key Features Reinforced construction – A rigid, heavy frame minimizes vibrations and ensures stability even under intensive use. Accurate sanding thickness adjustment – A mechanical height gauge allows precise setting of the desired processing depth. Precisely balanced sanding drum – Made of drawn aluminum, it ensures even contact with the material and effective cooling during operation. Versatile application – Suitable for removing old paint, lacquer, rust, as well as for smoothing and deburring. Durable metal drive coupling – Reliable torque transfer from the motor to the sanding drum. Working width up to 920 mm – Ability to sand wide panels in two passes. Construction and Technology The Cormak MM3146 stands out with its robust, industrial-grade design. The main motor, rated at 1.5 / 2.2 kW (S1/S6), combined with a reinforced 60 W feed motor, provides ample power for demanding and continuous operations. The variable-speed feed system (0–4 m/min) allows for adjustment to material type and desired finish quality. The sanding belt (2100 × 75 mm) is driven by a high-speed drum (2800 rpm), allowing for quick and effective material removal. The sanding drum is self-cooling during operation, eliminating overheating issues. A reinforced side guide enhances parallelism and stability across the entire working width. Precision and Efficiency The Cormak MM3146 drum belt sander ensures consistent results thanks to its mechanical height adjustment system with a precision scale. It supports a minimum workpiece thickness of 3.5 mm and a maximum working height of 100 mm, allowing both thin boards and thick construction components to be processed. A working width of 460 mm in a single pass (or 920 mm with dual-feed operation) provides flexibility for both small and large batch production. Applications Isdpsw Hb D Dsfx Ah Asid The Cormak MM3146 through-feed sander is suitable for use in: Joinery and furniture manufacturing workshops Wood restoration studios Metalworking shops for deburring Production of plastic components Surface finishing lines for flat materials Standard Equipment Precision aluminum sanding drum Metal drum drive coupling Worktable: 460 × 465 mm Conveyor belt: 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Ø62 mm dust extraction port Optional Accessories Dust extraction system with chip separator Sets of sanding belts in various grits Infeed roller table Mobile base with brake Choose performance and professional surface finishing. The Cormak MM3146 400V drum sander is a reliable partner for both batch and one-off production – choose quality that delivers efficiency. Technical Specifications Parameter Value Motor Power S1/S6 1.5 / 2.2 kW, 400V Belt Speed 2800 rpm (for wood and metal) Sanding Belt Size 2100 × 75 mm Feed Belt Size 1120 × 450 mm Worktable Dimensions 460 × 465 mm Dust Port Diameter Ø62 mm Feed Speed 0–4 m/min Min. Material Thickness 3.5 mm Max. Working Height 100 mm Working Width 460 (920) mm Feed Motor Power 60 W Machine Dimensions 880 × 540 × 1230 mm Net/Gross Weight 134 / 160 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Machine Description The latest model of a single-drum sander with a dust extraction bag from the Cormak brand. The sander has been enhanced with new technological solutions to ensure more precise processing of wood, metal, and plastic materials (removal of old paint, derusting, sanding, deburring, etc.). Thanks to the efforts of our technical and design team, we have achieved: A massive construction significantly heavier than the previous version Reinforced side guide of the sanding drum, improving rigidity and ensuring high precision of the workpiece over a working surface of 460 (920) mm Metal coupling transmitting drive from the motor to the sanding drum A precise mechanical gauge for easy reading of the desired sanding thickness Iiodpjw Hb Atsfx Ah Ajd The sanding drum, made of drawn aluminum, is precisely balanced and self-cooling, included with the machine Technical Specifications Motor Power: S1/S6 1.5 / 2.2 kW 230V Belt Speed: 2800 rpm (for wood and metal) Roller Belt Dimensions: 2100 x 75 mm Feeder Belt Dimensions: 1120 x 450 mm Worktable Dimensions: 460 x 465 mm Dust Port Diameter: Ø62 mm Feed Speed: 0~4 m/min Minimum Material Thickness: 3.5 mm Maximum Working Height: 100 mm Working Width: 460 (920) mm Reinforced Feed Motor: 60 W Dimensions: 880 x 540 x 1230 mm Net/Gross Weight: 134 / 160 kg Manufacturer: Cormak

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P Wide Belt Sander – Durable and Reliable for Workshop or Professional Use The CORMAK MM3166P wide belt sander is a robust and dependable machine, ideal for both home workshops and professional woodworking environments. With its advanced features and solid technical specifications, it enables fast, accurate sanding of wood materials, delivering a perfect finish on every project. Key Features: Dual sanding drums ensure even and precise sanding across the workpiece. Conveyor belt system facilitates smooth material feed and consistent sanding results. Powerful motor (2200 W + 120 W) guarantees effective sanding, even on harder materials. Adjustable sanding belt speed allows you to match the speed to the type of material being processed. Dust extraction system ensures a cleaner working environment and protects the operator from inhaling fine dust. Sturdy construction guarantees long-term durability and operational stability. Wide sanding belt (635 mm) enables fast processing of large surface areas. Material thickness capacity: Min. 7 mm, Max. 125 mm. Sanding drum diameter: 150 mm. Iedpsxfhn Dsfx Ah Aeid Sanding belt speed: 14 m/s. Two dust extraction ports (100 mm diameter) for easy connection to dust extraction systems. Technical Specifications: Parameter Value Belt length 800 mm Belt width 635 mm Roller radius R 120 Max. workpiece thickness 130 mm Main motor power 2.2 kW Voltage 230 V Frequency 50 Hz Motor speed (at 220 V) 1800 RPM Feed motor power 120 W Feed speed 1.8 – 7.3 m/min Dust port diameter 100 mm (x2) Net / Gross weight 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Drum length 635 mm Manufacturer: Cormak

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors Iodpoxx Uudjfx Ah Ajid • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries Ijdpfx Ahowxrnwe Aoid *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. Iiedpjv Hchlefx Ah Aed 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Ijdoy Uc Nkopfx Ah Aoid Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 6624, total width: 1,000 mm, total length: 3,200 mm, total height: 1,800 mm, input voltage: 400 V, table length: 1,300 mm, power: 13.5 kW (18.35 HP), No minimum price – guaranteed sale to the highest bidder! The machine has been cleaned, repainted, and tested for functionality. TECHNICAL DETAILS Length of magnetic grinding table: 1,300 mm Drive: 13.5 kW Magnetic table: swiveling MACHINE DETAILS Dimensions (L x W x H): 3,200 x 1,000 x 1,800 mm EQUIPMENT Water cleaning with filter cloth Guide rail Iodpfxszlfm Dj Ah Ajid Separate control cabinet Separate control panel

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Iiodjrtr D Ispfx Ah Aed Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Tailstock Rittal AC Units Iiedpfx Ahsrtrxxe Asd Specifications: Maximum Center Distance: 680 mm

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: Iiedpfx Ahoxh Rqts Aed max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Isdpfxezlhlpj Ah Aeid Model: ZB 32 Capacity: 2.5-32mm With Cams

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Isdpfx Aszlg Szsh Asid Model: 108

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning Iedpfx Ahezmhkne Aeid • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: ready for operation (used), functionality: fully functional, center height in crank: 125 mm, center height: 125 mm, grinding length: 600 mm, Distance between centers: 600 mm Isdpfx Ahjzmhtve Aoid Height of centers (standard): 125 mm Speeds of the grinding spindle: 1500 / 1700 / 2200 / 3600 Grinding head swivels: 360° Transverse travel of the grinding head: 285 mm

Condition: used, functionality: unexamined, Hauser 3SM-DR jig grinding machine with a lot of accessories (photos) Iijdpfoy E Nilex Ah Asd

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 600004, Surface grinding machine Stöckl FL 10/60 SPS Availability: The item must be collected on either August 11 or August 12, 2026. The specific date will be communicated to you in advance and agreed upon. Payment terms: Advance payment – by bank transfer Internal No.: 175-2 Technical data: Grinding area: 1000 × 650 × 400 mm X-axis – Longitudinal movement Guide rails: V-flat guides, coated Table clamping surface: 1000 × 600 mm Table longitudinal travel: 1100 mm Table load capacity: 1000 kg Table drive: hydraulic, external Table feed rate: 3–25 m/min Y-axis – Vertical movement Vertical guides: V-flat guides, coated Feed direction: Trapezoidal lead screw Distance table–spindle center: 600 mm Feed rate: 180 mm/min Increment: - Adjustable from 0.001–0.030 mm - 0.001 mm with electric handwheel Z-axis – Traverse movement Guide system: V-flat guides, coated Traverse drive: Trapezoidal lead screw Traverse feed: Adjustable 3–60 mm Maximum traverse: 575 mm Fine adjustment: 0.001 mm via fine adjustment knob Grinding spindle head Motor type: Flange motor Grinding spindle drive: 11 kW Grinding spindle speed: 1400 rpm Spindle bearing: Precision spindle bearing Spindle lubrication: Grease lubrication Grinding spindle taper: 5:1 / 60 mm Grinding wheel standard: 400 × 100 × 127 mm Scope of supply: Existing manuals as shown in the pictures Balancing scale G+H as shown in the pictures Ijdpfx Aozmfd Sjh Aeid Dimensions & Weights: Installation dimensions L x W x H approx.: 4280 x 2900 x 2700 mm Weight approx.: 8000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net plus VAT. ►The goods are sold without any guarantee. ►Technical data is subject to change. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), Cut-off and cut-to-length machine Storage number: 3117 Manufacturer: presumably HAAS Iiodpfszmp Arsx Ah Ajd Year of manufacture: 1982 Machine number: Type / Model: Duoschliff Cutting wheel speed: Grinding wheel speed: Cutting wheel diameter: 90 mm Grinding wheel diameter: 100 mm (cup wheel) Workpiece length: 300 mm Motor: 0.25 kW Accessories/Equipment: Condition: good Weight: 50 kg Dimensions: 340 x 800 x 300 mm

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm workpiece height 375 mm digital readout 2 Achsen HEIDENHAIN table-size 650 x 350 mm max. table load 400 kg magnetic clamping plate 600 x 350 mm dist. center of grinding spindle - table 525 mm table travel longitudinal 650 mm table travel cross 350 mm table feed 2 - 28 m/min grinding wheel size 300 x 30 x 76,2 mm dressing device Kopfabrichter voltage 400 V total power requirement 11,0 kW Iedpfey Ehw Isx Ah Asid weight of the machine ca. 2,1 t dimensions of the machine ca. 2,20 x 1,70 x 2,25 m band filter unit 1,00 x 0,75 x 0,80 m electric cabinet 0,90 x 0,40 x 2,25 m - Serial-No.: 18090201 - Automatic vertical feed - Electric handwheel - HEIDENHAIN digital display, 2 axes - Head dresser - Coolant device - Belt filter system

Condition: used, Year of construction: 1990, working area D= 30 mm speed 20 m/min Ijdpezl E Rcjfx Ah Ajid Bar length 3000- 6000 mm weight of the machine ca. 3 t dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding.