Used Picker Hahn Sp5 for sale (435)

Condition: excellent (used), Picker Hahn SP5, x=100mm, y=650mm, z=90º Dodeu Iuw Eepfx Akmewc y.2015

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 Dwsdpfx Aozd Rmgokmec p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Dodszyanlspfx Akmswc Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: used, Year of construction: 1990, Weight 1,3 t turning length 40 mm cylinder 0-0,5 rapid traverse 3,7 m/min Dodpfx Akjzndt Uomewc

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Dodpfxsy Su A Ro Akmowc

Condition: good (used), functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Dwedjzutnzepfx Akmjc Cylindrical grinding device -- Dividing device -- Coolant device -- Grinding wheel holder -- Grinding wheels --- Operating instructions .

Condition: good (used), Year of construction: 2014, sprue Picker Sepro SR 55 x=75mm Y vert. 500mm year 2014 Stock: 1 · Dodpfxoxxlc Eo Akmjwc price: €4,350.00 contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2015, sprue Picker Sepro SR 55 x=75mm Y vert. 500mm year 2015 Dedpeu N Dbpofx Akmewc Stock: 1 · price: €4,550.00 contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Lapping machine, Hahn & Kolb - LHD 0 - Machine from a state institution / original condition - Lapping disk diameter 400 mm - Max. workpiece height 120 mm - Max. distance between the cast lapping disks 80 mm - Speed range 40-80-160 rpm - Speed - drive motor 700/1400/2800 rpm - Total power 1.8 - 2.7 kW - Turning device - manually operated - Various lapping mandrels - Documentation Dimensions: L x W x H 1.4 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted. Dwsdjzbz Ttjpfx Akmec

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Manufacturer's number: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 pieces Transmission ratio: 1:1 Spindle spacing (center of spindle to center of spindle diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collets Overall height from tool holder (bottom) to gearbox housing (outer edge, top): 218 mm - 4 spindle drives with collet chucks (collets are not included in the scope of supply) Dwodez Hfcljpfx Akmec - 4 tool spindles, adjustable in steps by twisting within the spindle spacing Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition

Condition: used, machine/vehicle number: IC1450, Year of construction: 2014, load capacity: 2,500 kg, fuel type: electric, mast type: other, fork length: 2,400 mm, Battery not good, brakes problem Serial Number: 90459099 Dsdszth U Tjpfx Akmewc Battery not good, brakes problem

Condition: excellent (used), Year of construction: 2018, lifting height: 2,260 mm, fuel type: electric, mast type: duplex, battery manufacturer: Hawker, battery capacity: 620 Ah, battery voltage: 48 V, Year of manufacture: 2018 Empty weight: 1.914 kg Battery: 620 Ah, 48 V, Year of manufacture 2018, Brand of battery Hawker Lifting capacity: 1.000 kg Technical condition: very good Visual appearance: very good Mast type: duplex = Additional options and accessories = - Battery charger = Remarks = Dwedpfx Aksz I Aakemjc = Additional options and accessories = - Pneumatic shaped solids = More information = EPA Marked: yes Please contact Bas Sindorf , ) for more information

Condition: good (used), quantity 1 STK. Hahn & Kolb SUBITO SU Internal Precision Gauge SU100-160mm 7 inserts 4 discs Without dial gauge In a wooden case. For the precise measurement of bores using the 2-point measuring method. By rotating and/or moving the gauge within the bore, geometric deviations can be detected. The movable measuring pin is fitted with carbide, as is the fixed measuring pin. Self-centring in the bore kzeuge GmbH. Dsdpozb Rapjfx Akmowc

Condition: good (used), Year of construction: 2007, operating hours: 9,500 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, Hwachon Cutex-160 CNC lathe | Fanuc | C-axis | 4 driven tools | Fedek bar feeder For sale is a Hwachon QTX 160 CNC lathe, manufactured in 2007, with Fanuc control and extensive equipment. The machine comes from a small production facility/workshop and is available immediately. It offers a versatile range of features for the precise machining of workpieces and is suitable for both individual parts and small to medium-sized series. Technical data: * Manufacturer: Hwachon * Model: Cutex 160 * Year of manufacture: 2007 * Control: Fanuc * Max. turning diameter: approx. 300 mm * C-axis: available * Driven tools: 4 * Tailstock: available * Chip conveyor: available Dwjdpsz Nqdzofx Akmoc * Tool turret: including the tools shown in the pictures Including Fedek short bar feeder A Fedek short bar feeder is also included in the offer. The bar feeder is fully functional and can, of course, be demonstrated and tested during operation during an inspection. Condition and availability: The machine is operational and available immediately. An inspection and demonstration are possible after prior arrangement. Interested parties have the opportunity to inspect the machine on-site and be convinced of the functionality of the machine and the bar feeder. An interesting complete solution for companies looking for a compact CNC lathe with C-axis, driven tools, tailstock, chip conveyor, and automatic bar feeder. Inspection / demonstration: by appointment Availability: immediate

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 2010, operating hours: 2,580 h, load capacity: 800 kg, lifting height: 1,000 mm, fuel type: electric, mast type: mono, battery capacity: 620 Ah, battery voltage: 24 V, fork length: 1,200 mm, total length: 2,950 mm, total width: 800 mm, fuel: electricity, STILL EK-X 790 – High-level order picker TECHNICAL DATA Lifting capacity: 800 kg Lifting height: 1.000 mm Mast: Mono (1S100) Fork length: 1.200 mm Drive: Elektro 24V Battery: 24 V/620 Ah (2009) Charger: Ohne/without Length: 2.950 mm Width: 800 mm Year of manufacture: 2010 Operating hours: 2.580 h Condition: not in working condition Internal no.: 1309089 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Dwedpfx Akjz Arg Sjmoc

Condition: used, functionality: fully functional, machine/vehicle number: 90041833, Year of construction: 2001, operating hours: 278 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,600 mm, empty load weight: 923 kg, drive type: Elektro, Low-lift order picker Chassis number: 90041833 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: SBS Dwsdpfezvz D Hox Akmjc Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: German: Jungheinrich ESE 20 No.: R0815 Year of manufacture: 2001 Operating hours: 278 Lifting capacity: 2,000 kg Initial lift / base lift: 220 mm Fork length: 1,600 mm Own weight: 923 kg Battery: 24 V / 375 Ah, year 2022, manufactured by SBS, type 3 PzS 375 Battery condition: 80–100% Condition: ready for use and fully functional, visually and technically in very good condition. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Jungheinrich ESE 20 No.: R0815 Year of manufacture: 2001 Operating hours: 278 Lifting capacity: 2,000 kg Initial lift / base lift: 220 mm Fork length: 1,600 mm Own weight: 923 kg Battery: 24 V / 375 Ah, year 2022, manufactured by SBS, type 3 PzS 375 Battery condition: 80–100% Condition: ready for use and fully functional, visually and technically in very good condition. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: good (used), machine/vehicle number: 17369, Year of construction: 2020, operating hours: 2,995 h, load capacity: 1,000 kg, lifting height: 3,165 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,260 mm, battery voltage: 24 V, fork length: 1,100 mm, overall weight: 1,923 kg, enginetype: Electric, manufacturer: Linde Serial Number: 615212X00186 Dedpfx Akjz N Agbjmjwc Battery Details: 24V 4HpzS 620Ah BJ: 2020

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Dedpfxoh Invro Akmowc Working disc speed 45/70/90/140 rpm Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operating panel Full-fledged lapping machine, conventional control

Condition: used, first registration: 01/2021, STILL horizontal order picker, model OPX-L 20S, type 03 EPZS 0465 SC, 24V, 465 Ah, power 3.0 kW, manufactured by ATH-Heinl GmbH & Co. KG / Germany. 5 units available!!! Sale exclusively to commercial businesses, with no warranty of any kind. Subject to errors and prior sale. Dwjdpfx Ajz Ha Ehskmjc

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,000 h, load capacity: 2,000 kg, lifting height: 125 mm, load center: 1,200 mm, fuel type: electric, power: 3 kW (4.08 HP), battery capacity: 465 Ah, battery voltage: 24 V, battery weight: 390 kg, turning radius (inner): 2,837 mm, overall weight: 3,079 kg, empty load weight: 1,079 kg, total height: 1,577 mm, total length: 3,667 mm, total width: 850 mm, color: orange, A total of 5 identical electric low-lift order pickers from the premium manufacturer STILL, model COP 20, are for sale. The COP series from STILL stands for extreme durability, maneuverability in narrow aisles, and excellent availability of spare parts. Perfect for warehouse operations, logistics companies, or dealers. The units come directly from a government surplus sale, have been regularly maintained, and are in roadworthy, fully functional condition. Dsdpfx Ajzv Htaskmswc Details: - Fully functional vehicle including charger - With a new service check (inspection/maintenance) performed by the STILL customer service in September 2026!!! Additional equipment: - Adjustable lifting platform for the operator Age & condition: - Year of manufacture: 2017 - Operating hours: All units have approximately 2,000 hours. - Fully operational. Lifting and driving functions work perfectly. - Normal signs of wear and tear consistent with age and usage. - Batteries: 24V / 465 AH, batteries & charger are in very good condition and fully functional - On-site test drive is possible Flexible sale: The units can be purchased individually or in any quantity (1 to 5 units). A corresponding price reduction is possible when purchasing multiple units or the entire package. Sales conditions: - The sale is to businesses, for export, or to private individuals. - The stated price is per unit plus VAT. - When purchasing multiple vehicles, we offer a tiered discount – just contact us! - An inspection and functional test are expressly desired after prior appointment. - Loading on-site can be assisted. Top opportunity for smart buyers! First-class STILL quality at an absolutely fair price. Secure your desired unit now or take advantage of the package discount when purchasing multiple units. Contact us now for your individual offer!

Condition: used, Year of construction: 1982, Multi-spindle lathe Brand: TORNOMAT Djdpfsyll Atox Akmewc Model 2 C

Condition: good (used), machine/vehicle number: 17172, Year of construction: 2021, operating hours: 5,803 h, load capacity: 2,000 kg, lifting height: 220 mm, fuel type: electric, mast type: other, construction height: 1,970 mm, battery voltage: 24 V, fork length: 2,400 mm, overall weight: 1,203 kg, enginetype: Electric, manufacturer: Still Dwodpfx Akszigqfjmjc Serial Number: F21075Y00515 Battery Details: 24V 3PzS 375Ah

Condition: used, machine/vehicle number: 17090, Year of construction: 2017, operating hours: 6,011 h, load capacity: 1,000 kg, lifting height: 4,550 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 3,100 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 2,868 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Still Serial Number: 612101H00204 Dedpfszfd T Nsx Akmewc Battery Details: 24V 6PzS 840Ah (aus 2022)

Condition: used, machine/vehicle number: 17041, Year of construction: 2019, operating hours: 6,573 h, load capacity: 1,200 kg, lifting height: 780 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,200 mm, front tire size: , rear tire size: , overall weight: 1,447 kg, enginetype: Electric, manufacturer: Still Serial Number: F21082V00190 Dedpfx Akey Hnhvjmewc Battery Details: 24V EPzS 620Ah BJ.2025

Condition: good (used), functionality: fully functional, Jungheinrich ECE 320 HP order picker: - Year of manufacture: 2020 BAT2020 (2018 BAT2021 / 2020 BAT2020) - In very good condition - Regular maintenance by Jungheinrich - Several units available - Operating hours: 2,674 h (4,256 h / 3,565 h) - Including charger - Load capacity: 2,000 kg Dodpfx Aozrtdkskmewc - Lifting height: 750 mm - Fork length: 2,400 mm Shipping via freight forwarder is possible after consultation. € 2,900,- #8545-1 to -3