Used Piezoelectric Force Sensor for sale (11,908)

Condition: good (used), Kistler 9041A Piezoelectric Force Sensor, Force Ring Fz 90 kN Laedek Uul Eepfx Ammec Item condition: Used R12A5K2-5-PD (BOR) More sensors - new and used - you will find in our store! International shipping costs on request!

Condition: new, HBM Piezoelectric Force Measurement Ring 1-CFW/140kN New piezoelectric force measurement ring from HBM. The original packaging was only opened for the purpose of taking photographs. Manufacturer: HBM (Hottinger Baldwin Messtechnik) Type: 1-CFW/140kN Device type: Piezoelectric force measurement ring Measuring principle: Piezoelectric Lodpfx Aozcg Daommoac Rated force: 140 kN Available quantity: 1 piece

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box Ljdpsg Sxyvofx Ammjac

Condition: excellent (used), Zwick / Roell ProLine Z005 Universal Testing Machine Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Machine Type: Universal Testing Machine / Material Testing Machine Maximum Testing Force: 5 kN Load Cell: Xforce P 5 kN For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile, compression, and material testing in laboratories, quality assurance, research, and development. Technical Data Machine dimensions approx.: 917 x 439 x 1331 mm (W x D x H) Testing width: approx. 440 mm Frame width: approx. 720 mm Frame installation width: approx. 770 mm Machine weight approx.: 200 kg Power connection: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Made in Germany Load Cell Type: Zwick Xforce P Rated force: 5 kN Measurement start, Class 1: 20 N Measurement start, Class 0.5: 100 N Nominal measurement travel: 0.06 mm Protection class: IP54 Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Weight: approx. 0.65 kg Connection thread: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Measuring Module Measuring module: DCSC Lodpezfy Ivefx Ammeac Measuring range: 0.2 % to 165 % of the nominal measurement value Measurement value acquisition rate: max. 10 kHz Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Machine electronics PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Research and development Laboratory applications Scope of supply Zwick / Roell ProLine Z005 universal testing machine Xforce P 5 kN load cell DCSC measuring module PC system / software as shown in the pictures Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Changes and errors in the technical data and prior sale reserved.

Condition: like new (used), Manufacturer Part No.: TRS 0100 Ledpfxjzfy Iie Ammoac P/N 023274 B/N 212544/0162/A Includes mounting hardware. Application: Plant and equipment engineering Length: 315 mm Width: 18 mm Height: 40 mm Weight: 144 g Condition: Like new

Condition: like new (used), 10 - 30 V DC , 200 mA Lasdezfghpspfx Ammoc switchable, with on/off delay Length: 85 mm Diameter: 30 mm Weight: 205 g Condition: like new

Condition: good (used), functionality: fully functional, Year of construction: 2017, Forced-circulation chamber ovens, electric, 12-month warranty, available for short-term delivery -Temperature 200°C, can be increased to 250°C! -Charging trolley, 5 units available, modification upon request -Fast heating times, short process times -Homogeneous temperature distribution of +/- 10°C -Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm -External dimensions (W x D x H): 4850 x 1705 x 3880 mm -Usable volume: 11.6 m³ -Control system: S!MPAC with touch panel -Program execution with feeler as a cascade control -Temperature limiter -Signal column -Directly accessible, with grid rails -Exhaust air volume flow: 140 m³/min -Electromagnetic door lock -Rated power: 180 kW -Connection: 241 kW!! Ledoy Tkfwspfx Ammoac -Weight: approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, forced-circulation oven, chamber oven, heating oven, chamber forced-circulation oven, annealing oven, tempering oven, forced-circulation chamber oven, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Ljdpfxezdn H Re Ammsac Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) Laedjzdn T Ropfx Ammjc We will gladly answer any further questions you may have over the phone.

Condition: like new (used), ifm distance sensor O1D100-01DLF3KG Like-new optical distance sensor for precise distance measurement in industrial automation and handling applications. Manufacturer: ifm electronic Type: Optical distance sensor Model: O1D100-01DLF3KG Series: O1D Measurement principle: PMD Time-of-Flight Light source: Laser Protection rating: IP67 Output: Switching output Output: Analog output Electrical connection: M12 connector Housing material: Metal/plastic Application: Distance measurement Application: Position detection Lsdpfezduuuex Ammoac Application: Presence detection Application: Automation technology Condition: Like new Quantity: 5 pieces available

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking Laodpfsyc H R Tox Ammjc • Device inspected (TBM inspection stickers)

Year of construction: 2010, condition: excellent (used), Tension testing device manufacturer: Prema max. pressure: 100 MPa Ledpfx Amofd Encemeac clamping diameter: 220 mm weight: 12 kg

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, Schatz torque adapter, 2000 Nm in wooden crate, untested. Lasdpfjzfxqpjx Ammsc

Condition: excellent (used), Binder FD 53 Drying Oven / Heating Cabinet Manufacturer: Binder Type: FD 53 Year of manufacture: 2014 Made in Germany Drying oven / heating cabinet with forced air circulation for laboratory, research, quality assurance, material testing, and industrial applications. Technical data Internal volume: 53 liters Temperature range: approx. +5 °C above ambient temperature to 300 °C Internal dimensions (W x H x D): approx. 400 x 400 x 340 mm External dimensions (W x H x D): approx. 635 x 620 x 690 mm Load per shelf: 15 kg Maximum total load: 40 kg Empty weight: approx. 44 kg Power connection: 230 V Frequency: 50 / 60 Hz Rated current: 5.3 A Rated power: 1.2 kW Protection class: IP20 Equipment Forced air circulation system Digital temperature display Electronic temperature control Safety temperature limiter according to DIN 12880 Stainless steel interior Multiple shelf levels Robust laboratory design Inspection / Calibration DGUV V3 inspection performed on: 28.07.2023 Calibration performed on: 28.07.2023 Inspection and calibration stickers are attached to the device. Condition Used equipment. Device can be switched on, temperature display is active. Signs of wear and tear due to age and use. Optical condition as shown in the pictures. Scope of supply: see pictures. Lsdpfxezcwxzo Ammjac The table shown in the pictures is not included in the sale. Shipping possible. Errors and omissions excepted.

Condition: used, maximum load weight: 31,335 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 01/2026, loading space volume: 92 m³, Equipment: ABS, Sliding floor trailer with conical trough design, 92 m³ volume, 385/65 tires, ABS, ESP, 3x9 t SAF B9-22S Intradisc CD IO37 axles with 22.5 inch (430 x 45) disc brakes, ET 120 2040/1200; 9 t BPW SRBF Eco Air axle with 22.5 inch Eco Disc TS2 disc brakes ET 120; Wabco braking system with control box; lift axle on the first axle; automatic raising and lowering / starting aid controlled via EBS; Rectus 26KA air connection; 6x steel rims 22.5x11.75 inch ET120; Europoint 3 Hybrid lighting; 2x LED work lights mounted inside, in the upper corner of the front wall; floor: aluminum, 21-plank, 8 mm, smooth surface; hydraulic connection at front wall; radio remote control; ladder on the right of the front wall or on the front wall door; 12 pairs of lashing rings embedded in the side floor profiles in pairs; 2x round 80 mm bows (not swiveling) + 1x round 50 mm front + 1x round 50 mm rear; wear plates left/right at the rear section inside, aluminum 1250x2500x3mm; 2 rail cleaners made of plastic, attached to the carriage with a chain; plastic toolbox; roll tarp with tension belt; foldable A-board (rear side in body color white); side underrun protection with plastic plate; Rollfix. Lsdoxmpvljpfx Ammeac

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser through-beam line sensor 47/16 04078-R, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfxex Eugij Ammjc

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-T-CL laser through-beam line sensor 04078-T, used, in good condition, 100% functional, scope of delivery as shown in photos. Lasdpfx Ajx Eug Asmmsc

Condition: new, Gantner ISM 112 Intelligent Sensor Module SN: 085055, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Lodpfjy Np Ucox Ammsac

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser transmission line sensor 29/16 03819-R, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ljdpfx Asx Eugcemmjac

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser through-beam line sensor 47/16 04079-R, used, in good condition, fully functional, scope of delivery as per photos. Lajdpjx Eugpofx Ammoc

Condition: new, KISTLER 4618A0 amplifier + 4067A2000 SN 1804719 sensor, unused in opened original packaging, 100% functional, scope of delivery as per photos Lsdoy Srpujpfx Ammjac

Condition: new, Hübner HEAG 164-15 Amplifier, Serial No.: 1555756 + ACC 93 Sensor, Serial No.: 1555751, unused, 100% functional, scope of supply as shown in the photos. Lasdji Ea Rvepfx Ammoc

Condition: ready for operation (used), ipf PT700523 / 50115802 Laser Sensor SN: 13070501 68 009, used, good condition, 100% functional, scope of delivery as per photos Lodep Illwspfx Ammeac

Condition: new, Banner Q45UR3LIU64CQ6K Analog Q45R Remote Ultrasonic Sensor Kit, unused, in original packaging, 100% functional. Ljdpfsi D T Epex Ammjac

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-T-CL laser through-beam line sensor 47/16 04077-T, used, in good condition, 100% functional, delivery as per photos. Laodpfx Amox Eugvsmjc